?? What versions of OpenSSL and OpenVPN clients now in use

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
Author Message
Sam1789
DD-WRT User


Joined: 14 Oct 2016
Posts: 324

PostPosted: Mon Jun 10, 2019 4:44    Post subject: ?? What versions of OpenSSL and OpenVPN clients now in use Reply with quote
Am looking to upgrade my routers firmwares. And want to see what the latest OpenVPN and OpenSSL are in use as clients in the current dd-wrt Firmware?

Run a stack of 5-7 routers, wrt3200's, wrt1200v2, TPL wdr4300, wrt54GL all on BS versions.
The NetGear r6300v2's on Kong's FW.

Also looking for the "best" (meaning secure and stable) versions for these routers.
Note WiFi is only used on the Kong Builds with the NetGear r6300v2's.

It's been a while since I've visited this forum and I will appreciate help in getting me back up to speed.

Thanks
Sam

_________________
multi-tier router stack
wrt 3200's for speed & cpu power, NG R6300v2's for WiFi AP's,
wrt 1200v2 for one of my secure subnets.
wrt54GLs for ad'l 3rd tier machines.
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12836
Location: Netherlands

PostPosted: Mon Jun 10, 2019 7:46    Post subject: Reply with quote
DD-WRT v3.0-r39960M kongac (c) 2019 NewMedia-NET GmbH
Release: 06/08/19
Board: Netgear R6400 v2

root@R6400v2:~# openvpn --version
OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 8 2019
library versions: OpenSSL 1.1.1b 26 Feb 2019, LZO 2.09

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Sam1789
DD-WRT User


Joined: 14 Oct 2016
Posts: 324

PostPosted: Fri Jun 14, 2019 4:37    Post subject: Reply with quote
egc,

Thanks for your reply. Good to hear from you. Like I said, it's been a while since I was here. And I was thinking it was probably about time to update my router firmware.

Thanks for verifying the OpenVPN & OpenSSL builds

I'm running NG r6300v2s. And they were configured around 2018-09-23+. Not sure where to find the Kong builds. But are there any builds newer than that which apply to my r6300v2's?

From scanning thru the forums I didn't see any new builds that were being recommended for safety & security improvements. But I'd guess that after 8-10 months there must have been some safety & security issues which came up and have been worked on & fixed? Or am I still ~in good shape with my older versions?

It's always a concern since I have 3,200 to 5,000 unsolicited hits per day. And sometimes that number gets up way over the 5,000 #.

regards,
Sam

_________________
multi-tier router stack
wrt 3200's for speed & cpu power, NG R6300v2's for WiFi AP's,
wrt 1200v2 for one of my secure subnets.
wrt54GLs for ad'l 3rd tier machines.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12836
Location: Netherlands

PostPosted: Fri Jun 14, 2019 10:07    Post subject: Reply with quote
Builds from Kong: https://www.desipro.de/ddwrt/K3-AC-Arm/

For the R6300v2 you need de arm_std build (look in supported models)

The stable build is still from 23 Septembre 2018 so you should be good with your current build

I use the Test build, normally his tests builds are also tested by Kong himself and if the build thread also reports success by others you should be good on the latest build.

But with your current build you should be good

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum