Posted: Mon Jun 10, 2019 4:44 Post subject: ?? What versions of OpenSSL and OpenVPN clients now in use
Am looking to upgrade my routers firmwares. And want to see what the latest OpenVPN and OpenSSL are in use as clients in the current dd-wrt Firmware?
Run a stack of 5-7 routers, wrt3200's, wrt1200v2, TPL wdr4300, wrt54GL all on BS versions.
The NetGear r6300v2's on Kong's FW.
Also looking for the "best" (meaning secure and stable) versions for these routers.
Note WiFi is only used on the Kong Builds with the NetGear r6300v2's.
It's been a while since I've visited this forum and I will appreciate help in getting me back up to speed.
Thanks
Sam _________________ multi-tier router stack
wrt 3200's for speed & cpu power, NG R6300v2's for WiFi AP's,
wrt 1200v2 for one of my secure subnets.
wrt54GLs for ad'l 3rd tier machines.
Thanks for your reply. Good to hear from you. Like I said, it's been a while since I was here. And I was thinking it was probably about time to update my router firmware.
Thanks for verifying the OpenVPN & OpenSSL builds
I'm running NG r6300v2s. And they were configured around 2018-09-23+. Not sure where to find the Kong builds. But are there any builds newer than that which apply to my r6300v2's?
From scanning thru the forums I didn't see any new builds that were being recommended for safety & security improvements. But I'd guess that after 8-10 months there must have been some safety & security issues which came up and have been worked on & fixed? Or am I still ~in good shape with my older versions?
It's always a concern since I have 3,200 to 5,000 unsolicited hits per day. And sometimes that number gets up way over the 5,000 #.
regards,
Sam _________________ multi-tier router stack
wrt 3200's for speed & cpu power, NG R6300v2's for WiFi AP's,
wrt 1200v2 for one of my secure subnets.
wrt54GLs for ad'l 3rd tier machines.
For the R6300v2 you need de arm_std build (look in supported models)
The stable build is still from 23 Septembre 2018 so you should be good with your current build
I use the Test build, normally his tests builds are also tested by Kong himself and if the build thread also reports success by others you should be good on the latest build.