I don't feel brave (or smart) enough to be the first. I'll be looking forward to reviews from those who are _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
Firmware Version
DD-WRT v3.0-r40009 std (06/11/19)
Kernel Version
Linux 4.9.181-rc1 #1075 SMP Tue Jun 11 13:41:10 CEST 2019 armv7l _________________ WRT1900ACSv2
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Thanks for the update. .
Did you retain current settings, or did you reset? _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
Joined: 10 Nov 2018 Posts: 350 Location: South Carolina
Posted: Wed Jun 12, 2019 3:01 Post subject:
giles02134 wrote:
Thanks for the update. .
Did you retain current settings, or did you reset?
Giles,
In my case, a very clean update. No changes, resets, or cleaning up parms needed except the soft reset that automatically happens after a flash. I'm using a wrt3200acm V1 router. Its typically been a very clean and forgiving. I did not have to reload any VPN keys or any setting.
I am encouraged. I'll run the update later today.
Thanks for taking the plunge! _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
8 hours good here, the problem i was having with the previous build is fixed. ( i had to leave it in g-mode on 2.4ghz ) wireless is very stable for all the devices _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Just flashed without resetting, using FF 67.0.1 x64 (Mac). No issues thus far. I'll be interested to see if the scheduled reboot works tomorrow at 3:00 a.m.
Will report any issues that emerge. _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
Joined: 04 Aug 2018 Posts: 1447 Location: Appalachian mountains, USA
Posted: Wed Jun 12, 2019 15:15 Post subject:
I'm very encouraged by all of your reports, and it may be time for an update. One issue for me though is DNSCrypt. I need it, as I am not yet ready to take the DNS-over-TLS plunge. I understand that the "Encrypt DNS" button is gone now from the DNSMasq configuration block in the GUI, but I don't need that. I can set it up in the DNSMasq Additional Config and the Startup Commands as long as dnscrypt-proxy still exists in the system, and it's easiest if dnscrypt-resolvers.csv is there as well. I know that these files remained in at least a few versions after the button disappeared.
In the CLI in 39144 I can see them this way:
root@DD-WRT:~# ls -l /etc/dnscrypt/dnscrypt-resolvers.csv
-rwxr-xr-x 1 root root 22309 Mar 10 22:19 /etc/dnscrypt/dnscrypt-resolvers.csv
root@DD-WRT:~# ls -l /usr/sbin/dnscrypt-proxy
-rwxr-xr-x 1 root root 262787 Mar 10 22:21 /usr/sbin/dnscrypt-proxy
Could someone have a look in this new release and see if the files are still there?
Many thanks, folks. _________________ 2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
Joined: 04 Aug 2018 Posts: 1447 Location: Appalachian mountains, USA
Posted: Wed Jun 12, 2019 16:20 Post subject:
Thanks, DaveI. (If anyone wants to set up DNSCrypt in this release, give a try to the approach described in my last signature item below.) _________________ 2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
After upgrading i get a user.err with the dnscrypt resolver and have lost internet connectivity.
-user.err : No resolver named [adguard-dns-ns2] found in the [/etc/dnscrypt/dnscrypt-resolvers.csv] list, unable to read file either and does not have an a config file.
-Unable to save specific options such as disabling dnsmasq and Recursive DNS Resolving (Unbound) _________________ ------------------------
Linksys WRT1900ACv2
Last edited by Kailen on Thu Jun 13, 2019 20:05; edited 6 times in total