Status:
Reset:
Errors: _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
OK, K4.14, NOT... not on the R9000...
Router Model Netgear Nighthawk X10
Firmware Version DD-WRT v3.0-r40009 std (06/11/19)
Kernel Version Linux 4.9.181-rc1 #343 SMP Tue Jun 11 10:22:21 CEST 2019 armv7l
She runs....I'll post more soon... _________________ FORUM RULES
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Wed Jun 12, 2019 7:32 Post subject:
There are many changes in Mesh and VHT80+80 modes. Still trying to figure out to make it work. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
TP-Link TL-WR841ND v9
Firmware Version DD-WRT v3.0-r40009 std (06/11/19)
Kernel Version Linux 3.18.140 #43508 Tue Jun 11 12:09:32 CEST 2019 mips
Reset: YES
Errors: None so far
working ok on all these units but I prolly won't put on the main gateway router..... tired of the hassle
EA8500
DD-WRT v3.0-r40009 std (06/11/19)
Linux 4.9.181-rc1 #321 SMP Tue Jun 11 11:06:13 CEST 2019 armv7l
switch with a VLAN / ovpn server / samba share
working ok
#
WNDR3700v4
DD-WRT v3.0-r40009 std (06/11/19)
Linux 3.18.140 #43546 Tue Jun 11 13:06:13 CEST 2019 mips
switch / ovpn server / samba share
working ok
#
WRT160NL
DD-WRT v3.0-r40009 (06/11/19)
Linux 3.10.108-d8 #11482 Tue Jun 11 11:09:27 CEST 2019 mips
will NOT install on my other two WRT160NL or the E2100L I have with '->Oops: flash id 0xc22017 .'
Some tell me it's too big to flash on these routers but that is silly ---
r34311 is 7.9 MB (7885824 bytes)
r40009 is 7.7 MB (7734272 bytes)
AFAIK the WRT160NL or the E2100L will take a flash up to (7995392 bytes) but some of the stupid things just can't find the 'rootfs' these days
NOTICE ---> mtd2 & squashfs ---> 'SEE HERE'
Last edited by mrjcd on Wed Jun 12, 2019 13:01; edited 1 time in total
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Wed Jun 12, 2019 12:48 Post subject:
Router: Netgear Nighthawk X10 / R9000
Firmware: DD-WRT v3.0-r40009 std (06/11/19 )
Kernel: Linux 4.9.181-rc1 #343 SMP Tue Jun 11 10:22:21 CEST 2019 armv7l
Reset: No
Errors:
Recent mesh commits didn't help in connecting using VHT80+80 and VHT160 modes for wireless mesh. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Jun 12, 2019 21:15 Post subject:
labo wrote:
There are many changes in Mesh and VHT80+80 modes. Still trying to figure out to make it work.
i tested it with 2 netgear r7800 in vht160 and vht80+80. just do it and it works. if you have a client which isnt capable of doing vht80+80 or vht160 (openwrt doesnt support it. it broken there), then it will not work, but just in vht80.
just ensure to setup the same channel of both sides and the same encryption setup and it works.
if you use openwrt on one side, do not use encryption. openwrt does not support SAE encryption with most algorithms. GCMP etc. is not supported by openwrt. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Last edited by BrainSlayer on Wed Jun 12, 2019 21:38; edited 1 time in total
most of your tickets are simply invalid. dont ask me about problems with fq_codel. ask the developers of fq_codel. dont ask me about problems with mfp if your client device doesnt support mfp. if i use 2 dd-wrt devices with mfp enabled it works and yes iphone doesnt support mfp _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Jun 12, 2019 21:41 Post subject:
stalonge wrote:
@ bs
I can set mesh to work but when i set VAP , radio cant broadcast VAP .. so mesh and VAp cant work together as before
consider that no vap will work in any way if mesh is not connected. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
most of your tickets are simply invalid. dont ask me about problems with fq_codel. ask the developers of fq_codel. dont ask me about problems with mfp if your client device doesnt support mfp. if i use 2 dd-wrt devices with mfp enabled it works and yes iphone doesnt support mfp
mfp ticket isnt about a "problem with mfp not working", its about a problem with mfp when using 802.11 which breaks fast roaming EVEN WHEN SET TO OPTIONAL MFP.., did u actually look at it? u need to check again cause ios devices do support mfp. all of these iphone 7 and 8 and xs/xs max in this house along with ipads all do. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Thu Jun 13, 2019 8:45 Post subject:
BrainSlayer wrote:
labo wrote:
There are many changes in Mesh and VHT80+80 modes. Still trying to figure out to make it work.
i tested it with 2 netgear r7800 in vht160 and vht80+80. just do it and it works. if you have a client which isnt capable of doing vht80+80 or vht160 (openwrt doesnt support it. it broken there), then it will not work, but just in vht80.
just ensure to setup the same channel of both sides and the same encryption setup and it works.
if you use openwrt on one side, do not use encryption. openwrt does not support SAE encryption with most algorithms. GCMP etc. is not supported by openwrt.
@BS, Yes I was only testing between two R9000 and 2 R7800 all four in mesh which are all VHT160 and 4x4 streams supported. And NO openwrt.
The only thing I didn't try yet is the RESET. I can try that if its necessary .
And report back
UPDATE: Thanks! BS. Reset fixed the Mesh issues. I'm able to set VHT160 channel 36-64 and 100 - 128 DFS.
UPDATE2: @BS, I found an issue with R9000 Mesh VHT160 mode. It works fine without encryption. But as soon as I enable WPA the Radio shutoff in Mesh mode.
UPDATE3: OK, finally I found the culprit in this build which was responsible Mesh radio shutoff.
I had this option below enabled which was the culprit. Earlier builds were just working fine with this.
802.11r / Fast BSS Transission support
This should be disabled for Mesh VHT160 to work in this build. Hope BS fixes this soon. Still I can't get internet from mesh clients which I will have to figure out.
Also, adding VAP doesn't work (unable to connect to ).
Last edited by labo on Thu Jun 13, 2019 12:56; edited 3 times in total