Flash Asus w500gp v2

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Tue Jun 04, 2019 14:09    Post subject: Flash Asus w500gp v2 Reply with quote
Hello,
I want to flash firmware dd-wrt on a asus router w500gp v2.
I put the router on restore mode (power blinks) but when i try to flash the flash stops on 10% always.
Already try to flash original firmware same problem.
I dont have 100% sure but i think i flash first time asus w500p firmware...
The router by rj45 conect to pc and i find the ip of the router on cmd but not always i can open router page...
Already try to flash by cable but stops on 10% too...
what can i do?
tanks
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Jun 04, 2019 14:33    Post subject: Reply with quote
Use Internet Explorer and clear browser cache
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Wed Jun 05, 2019 0:49    Post subject: Reply with quote
i try now with tftp.. same problem the router start flash but about 20% stops and get error...
before i try to flash by browser... but also about 20% crash... Sad
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Sat Jun 08, 2019 0:41    Post subject: Reply with quote
i download from asus website the all firmware but same error...
start the flash about 11% the flash stops and crasches...
when i turn on the router (even without push the restore button) the power light starts blinkig... after about 5m the light stop blinkig and stays on and "fixed".
what can i do more? is possible to flash by usb?~tanks
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Mon Jun 10, 2019 23:57    Post subject: Reply with quote
I try this one.:
My router is a w500g premimum v2

2016-04-11_R29440-dd-wrt.v24_mega_generic --Alvin

i think is this one..
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Thu Jun 13, 2019 23:57    Post subject: Reply with quote
hello,
try with all the firmwares but same error failed at 12%.
I conect the router by rj45 to pc..
and put manualy the ip
168.192.1.100
255.255.255.0

and try with and without 162.168.1.1 on getaway..
is correct?
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Fri Jun 14, 2019 9:18    Post subject: Reply with quote
Yesterday i try with ip 192.168.1.10 and the router flashes the original rom.. but i try to acess the router on web 192.168.1.1 with admin / admin but says wrong acess Sad
Then i try to flash ddwrt rom with tftp but failed ate 11% again Sad
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Fri Jun 14, 2019 13:49    Post subject: Reply with quote
Multi2410 wrote:
Yesterday i try with ip 192.168.1.10 and the router flashes the original rom.. but i try to access the router on web 192.168.1.1 with admin / admin but says wrong access Sad
Then i try to flash ddwrt rom with tftp but failed ate 11% again Sad
Did you reset after flashing back to OEM? It sounds like the OEM f/w doesn't reach the address on whichever partition that has failed, but third-party f/w does.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Multi2410
DD-WRT Novice


Joined: 04 Jun 2019
Posts: 7

PostPosted: Tue Jun 18, 2019 1:14    Post subject: Reply with quote
Hello,
after flash i reset router and open the router page with admin admin but still failed.
i try to flash any other rom by tftp but always failed the flash...
the only rom that flash is the original but dont let me open the router page.
I need to put a costum rom to put the router like acess point Sad(
Display posts from previous:    Page 1 of 1
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum