Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. Since 39469, udhcpd was removed and replaced with the already present dnsmasq, and PIE qdisc was added for some builds.
5. Policy-Based Routing with SFE enabled was fixed in r39556: 5986 and 5900 6. k2.4 (broadcom/) builds were fixed in 39715 (broken in 39144 through 39654)
7.SFE update (k3.10+ for BCM) was in the 39927 build.
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?); GUI issues:6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears to be fixed for some routers (different kernels, modes, and radios) since build 39508.
Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Joined: 09 Nov 2014 Posts: 307 Location: Bakersfield, CA
Posted: Fri Jun 07, 2019 15:13 Post subject:
I've ran this on my two E3000 and a E900 since it was posted on the ftp server, and so far, no issues. Speeds are great. Seems pretty stable. :3 _________________ Deployed Routers:
Netgear R7000 - 3x build 43171M (Gateway: DoT/DoH, CAKE QoS, USB /w Entware)
Linksys E3000 - 2x build 43171M (Client Bridges)
Too many to list. I have old routers, bricked routers, weird routers. You name it.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39956 std (06/06/19)
Kernel: Linux 4.4.180 #190 SMP PREEMPT Thu Jun 6 07:12:30 CEST 2019 armv7l
Mode/Status: Gateway / working
Issues/Errors: Working so far.
Uptime: 1day 1hr 1min (really)
Temperatures: CPU 69.1 °C / WL0 48.3 °C / WL1 54.1 °C
Joined: 16 Mar 2019 Posts: 126 Location: Szczecin, Poland EU
Posted: Sun Jun 09, 2019 20:56 Post subject: Router Netgear WNR3500L v2
Router/Version: Netgear WNR3500L v2 File: dd-wrt.v24-39956_NEWD-2_K3.x_mega-WNR3500Lv2.chk Kernel: Linux 3.10.108-d8 #24797 Mode: Internet Gateway + WiFi AP Status: Full OK Uptime: 1 day and 1:14 Errors / Problems: No
I'm updated my device from 6 Feb version to 6 Jun version and I don't see any problems. Image size is smaller than earlier and I can flash it without any problems. After flash I'm only re boot device without any changes. Flash method was by Putty and SSH.
Joined: 17 Apr 2014 Posts: 102 Location: SF Bay Area
Posted: Wed Jun 12, 2019 17:53 Post subject:
Router/Version: N66U B1
Kernel: Linux 3.10.108-d8 #24813 Thu Jun 6 12:23:23 CEST 2019 mips
Mode: standard gateway, 2.4+5GHz, mostly static DHCP WAN
Status: up 24 hrs, stable
Recent fw: 39572, 39927
* single nas timer rekey event, yaaay
* wifi performance improved
* no wifi hang/dropouts