update: For my configuration and needs its working perfectly for about 5 hours now. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Last edited by PIZZEDMEOFF on Thu Jun 06, 2019 17:57; edited 1 time in total
Updated using FF 67.0.1 x64 (OS-X).
All appears to be working as it should.
My only issue with the most recent releases has been the scheduled reboot. I've found that if after an upgrade, I change the scheduled time from what was transferred from the previous release, then Apply/Save, it will usually work. _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Why does everyone still continue to post that everything is working fine? If it is what's the point to continuing script adjustments. I run ISP at 200Mbps/10Mbps, and with the new builds I can only get 75-85Mbps/11Mbps after UDP openvpn is enabled. With recommended builds for the WRT3200ACM from router data base best I can run 140Mbps/12Mbps after UDP openvpn is enabled. Work on download and upload script adjustments instead. ISP still shows in active clients. WiFi on older builds was even running 150Mbps/11Mbps!
Last edited by Justanotherbrokenrouter on Thu Jun 06, 2019 16:44; edited 1 time in total
Please continue to "Working Fine" or not so... I like to stay with the latest so I much appreciate BrainSlayer's dedication and the "super users" who give us a basic Yay or Nay.
i know you can just hit apply settings under wireless to make it come back from it..... _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Please continue to "Working Fine" or not so... I like to stay with the latest so I much appreciate BrainSlayer's dedication and the "super users" who give us a basic Yay or Nay.
Thanks rotobill, I know it was not specifically me your talking to but i try check the basic stuff on post..
Tabs working in GUI basic functional stuff and so on.
Then ill come back and post OR update my post as i find things...etc.. i work a lot so sometimes thats all i have time to do at first. so anyway i know its the little posts that help people decide what they are doing.
So anyway thanks for taking the time to say.
ive been around here a long time and didnt make a account till i felt i had time to mess around on the forum ive always been a I.T. guy so i have used this firmware a lot over the years ive been here since the start lurking.
Now my little rant i feel compelled to do.
i mailed BS about the 6-03 build that got pulled because it seems so many can bitch and moan on here but no one wants to place a ticket.
heres the email and the answer
Quote:
My Email to him:
wrt1900ac After flash and reset, if you click on the wireless tab gui will crash and you cant access it again until you reboot the router. Just wanted to shoot you a quick note since im on my way out the door for work.
His Reply:
hard to believe but i will check it
and then he pulled it and replaced it with another the next day, It was that simple. id have done a ticket but i was driving down the road...
As for everyone else.
When having a issue its good to gather all the details your able to and make a ticket on it.
Sometimes just this isnt working isnt enough info, do the detective work you can and let it be known on the ticket... IF your ticket gets closed with "need more info" ask the community for help on trying to gather it.
i personally read the time line each morning before work most days just to try to see whats going down.
i also try to see if we the community can solve it asking around in here on my issues before writing a ticket.
but even we the community need all the details we can get
thats why i have a signature with my basic configuration. and none default settings... anyway just my 2 cents. spend it how you all like. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Joined: 17 Feb 2010 Posts: 611 Location: Yorkshire (GOC)
Posted: Sat Jun 08, 2019 13:49 Post subject:
PIZZEDMEOFF wrote:
Now my little rant i feel compelled to do.
i mailed BS about the 6-03 build that got pulled because it seems so many can bitch and moan on here but no one wants to place a ticket.
heres the email and the answer
Quote:
My Email to him:
wrt1900ac After flash and reset, if you click on the wireless tab gui will crash and you cant access it again until you reboot the router. Just wanted to shoot you a quick note since im on my way out the door for work.
His Reply:
hard to believe but i will check it
and then he pulled it and replaced it with another the next day, It was that simple. id have done a ticket but i was driving down the road...
This is precisely why it is important for users to continue to post their experiences with particular builds here, especially if they have some issues. "Working with no issues on WRT... router" is also useful info. I have learnt through bitter experience not to trust every build that is released by BS and to only go with the ones where most user opinions are positive, both here and on the other DD-WRT forums.
These days, I like to be on the cutting edge, rather than the bleeding edge
BTW, if the build is in my sig., then you may assume that it installed correctly and works as expected for basic router operations _________________ Linksys WRT32X v1 - r45677
Linksys WRT1900AC v1 - r45677
TP-Link Archer C9 v1 - r45677
Firmware: ftp://ftp.dd-wrt.com/betas/2021/
WRT1900AC V1. No problems observed, up now for 5 days. Mind you, haven't done speed tests or checked that all configuration pages are fully functional.
new build out, i just made a post on it _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.