Joined: 14 Dec 2015 Posts: 774 Location: 127.0.0.1
Posted: Sun Jun 02, 2019 5:29 Post subject:
It would help if you shared what version of DD-WRT you are using, along with the wireless settings you have set up.
If you have any wired devices, when the wireless goes down, can they still access the router/internet? _________________ Tutorial for flashing WRT series WRT Installation,Upgrade & Basic Setup–Cliff Notes
r52242: WRT3200ACM, WRT1200ACv1 & 1 Velop in bridge mode(IoT subnet), r52242 WRT1900ACv1 AP
Velop:2 WHW0101, RE6500, RE9000(AP)
Spectrum - 1000/50
SysLog Watcher 5, New security Onion box coming soon, Fingboxes, PiHoles, NEMS, Cacti, rpisurv
Posted: Mon Oct 14, 2019 9:06 Post subject: Wifi Problems with new WRT3200 ACM
The thing is happening costantly to me with almost the same config (Italian Telecom TIM HUB)
I have costant daily nightmares connecting via wifi
dd-wrt version [Firmware: DD-WRT v3.0-r41218 std (10/01/19)]
Randomly it looks you can't connect to wifi on any channel (usually in an around 24 hour loop)
This is solved by a reboot.Did not test speed etc up to now i would like to achieve just reliability
included the athx interfaces configuration (default except dd-wrt broadcast non enabled) I read about enabling just 5ghz or possible wifi ..
I suspect something like a memory leak (and i noticed about updated wifi drivers on openwrt forums) i even tried to chedule a reboot every day (in case of a leak can make sense) but it looks is not effective
any guidelines on such problems >?
data_online wrote:
I use the Firmware: DD-WRT v3.0-r39825 std (05/19/19).
After the Wifi goes down I just can connect the router via LAN.
Here are my wifi options. Acutally i only use the mixed one.
Joined: 30 May 2017 Posts: 582 Location: Rural Manitoba
Posted: Mon Oct 14, 2019 14:38 Post subject:
I am sure the gurus will comment but I will put my two cents in anyway.
First off t a more stable build. Review post and decide accordingly. My preference is r40009 for my application.
Never use channel selection AUTO, it is a known problem with the 3200's.
Disable ath2, this is for dfs detection and should not be used as an AP. The 3200 is not a tri-band router. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55819
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55819 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55819 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use