Status:
Reset:
Errors: _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
EA8500
DD-WRT v3.0-r39855 std (05/25/19)
Linux 4.9.177 #314 SMP Thu May 23 08:26:01 CEST 2019 armv7l
No reset
GUI install over r39830M kongat (05/23/19)
switch / ovpn server / samba share FAT32
VLAN on ports 3 & 4
#
WNDR3700v4
DD-WRT v3.0-r39855 std (05/25/19)
Linux 3.18.140 #41608 Sat May 25 04:37:43 CEST 2019 mips
No reset
GUI install over r39827
switch / ovpn server / samba share ext4
#
all I'm using on both routers is working fine
Since no one has mentioned this I'm just throwing it out there if anyone wants to know:
r39855 has same ol ---
ath10k firmware ver 10.4-3.5.3-00050
that we had for long longest time.
#
Begining with r39825 and also r39827 had a bit newer don't know that it was any better for me
ath10k firmware ver 10.4.1.00030-1
Can't say about other units just the EA8500 QCA9980 and not sure why BS went back ...
...I know the R7500v2 is QCA9980, for one of its radios anyways, but I don't have one so can't say about it for sure
'bout all I know
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Sun May 26, 2019 23:47 Post subject:
Yes, I see it even in Kong's latest build on my R7800.
DD-WRT v3.0-r39855M kongat Release: 05/25/19
firmware ver 10.4-3.9.0.2-00044
Don't know whats goin on, lol _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Sun May 26, 2019 23:59 Post subject:
Oh, ok, so only QCA9980. I don't have any unit. I'm happy with Mr. K's R7800 firmware on wlan performance _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
TP-LINK WDR4300
DD-WRT v3.0-r39855 std (05/25/19)
Linux 3.10.108-d8 #9758 Sat May 25 02:39:43 CEST 2019 mips
No reset
GUI update.
Running miniDLNA.
Can't find any issues apart from SSH - I've disabled remote SSH, but the port is still open and accept WAN requests. If I disable the SSH daemon from Services, the router no longer accepts SSH requests.