adent DD-WRT Novice
Joined: 06 Feb 2018 Posts: 48 Location: Vienna, Austria
|
Posted: Fri May 17, 2019 17:20 Post subject: |
|
Hmm, the flash memory size of the v2 device is 128MB, so I think there must be different problem. |
|
jwh7 DD-WRT Guru
Joined: 25 Oct 2013 Posts: 2670 Location: Indy
|
Posted: Mon May 20, 2019 20:41 Post subject: Re: Betas on Netgear WNR3500LV2 are too big |
|
rigillo wrote: | All builds after r38581 of Feb 6th do not install anymore: they are too big. adent wrote: | Hmm, the flash memory size of the v2 device is 128MB, so I think there must be different problem. |
| The linux partition on NAND flash memory devices is far smaller than full capacity. Do a `cat /proc/mtd` in telnet, and also look at your `dmesg` output for partition sizes to check. OpenWRT appears to format the linux partition to 0x1b00000 = 28311552 bytes = 27.000 MB.
@rigillo If you can provide the above outputs, that would help. I'll let BS know about it. _________________ # NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4 |
|