Use IPTV device with x86 64 based and multicast questions?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware
Author Message
GeneralSP
DD-WRT Novice


Joined: 14 May 2019
Posts: 4

PostPosted: Tue May 14, 2019 13:18    Post subject: Use IPTV device with x86 64 based and multicast questions? Reply with quote
Hi folks, I use X64 based DD-WRT with VirtualBox. All working good accept my new IPTV boxe.

When I disable Multicast filter, the IPTV work great but I have a lot of packets spreaded in my network.

Can I isolate it with mac, IP or other things my IPTV boxe in my network?
or stop the multicasting packet flooding, use it only for my IPTV boxe?

Thanks!
Sponsor
GeneralSP
DD-WRT Novice


Joined: 14 May 2019
Posts: 4

PostPosted: Mon May 20, 2019 14:57    Post subject: Reply with quote
Near 80 read and no help! Confused
GeneralSP
DD-WRT Novice


Joined: 14 May 2019
Posts: 4

PostPosted: Fri May 31, 2019 12:22    Post subject: Reply with quote
WAW! I'm very impressed about help here! Mad
flood404
DD-WRT User


Joined: 18 Dec 2013
Posts: 183

PostPosted: Sun Jun 02, 2019 18:58    Post subject: Reply with quote
Only a few people use the x86 or the x64 bit versions of dd-wrt the rest of them use it on a routers made by various manufactures.

I would use dd-wrt on real hardware and not with a virtual box setup.

I have an Android TV box and it loves trying to connect to a server located in China with over 2000 connections which takes awhile for it to give up.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 4929
Location: Akershus, Norway

PostPosted: Sun Jun 02, 2019 19:10    Post subject: Reply with quote
How many interfaces are there on the dd-wrt router?

Do you have a switch in your network?

With a smart switch, you can enable IGMP-snooping on specific ports.

The IGMPproxy on the dd-wrt router can also be configured by the igmpproxy.conf file.
GeneralSP
DD-WRT Novice


Joined: 14 May 2019
Posts: 4

PostPosted: Sun Jun 02, 2019 23:01    Post subject: Reply with quote
Thanks guys, Razz


I using a PC with virtualbox because I can use the same PC for others things, like a FTP Windows server. This PC don't have Internet access, only Local. I have a 16 ports switch connected on the Lan port. This switch is not smart, can't use IGMP. Can you explain to me how make a Vlan (tag) or use the igmpproxy.conf ?
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 4929
Location: Akershus, Norway

PostPosted: Sat Jun 15, 2019 17:23    Post subject: Reply with quote
Here is an example of igmpproxy.conf

Code:
quickleave
phyint eth0 upstream  ratelimit 0  threshold 1
phyint br0 downstream  ratelimit 0  threshold 1
phyint eth1 disabled
phyint eth1.3 downstream  ratelimit 0  threshold 1
phyint ath0 disabled
phyint ath0.1 disabled
phyint ath1 disabled
phyint br1 disabled
phyint oet1 disabled
phyint lo disabled


You have one upstream interface or either downstream or disabled interfaces.

If your switch is not smart, it will treat multicast as broadcast and forward to every port.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum