Settings on serial connection to Soekris 4501

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
View previous topic :: View next topic  
Author Message
klausagnoletti
DD-WRT Novice


Joined: 05 Oct 2007
Posts: 9
PostPosted: Fri Oct 05, 2007 23:19    Post subject: Settings on serial connection to Soekris 4501 Reply with quote
Hello,

I now have the dd-wrt_full_serial.image from http://www.dd-wrt.com/dd-wrtv2/downloads/release candidates/DD-WRT v24 pre-RC4-reloaded/X86/registered installed on my soekris 4501.

It appears to boot, but after the Soekris BIOS, the screen is garbled, so I guess my connection settings in my terminal emulator is wrong.

Up until the OS boots, the output on the screen looks fine with 19200 8N1 No hardware flow control. As said before, the screen is garbled after GRUB. What are the connection settings to be able to see the output when booting?

Thanks

/klaus
Back to top View user's profile Send private message
Sponsor
klausagnoletti
DD-WRT Novice


Joined: 05 Oct 2007
Posts: 9
PostPosted: Sun Oct 07, 2007 14:46    Post subject: Reply with quote
I found out myself now.

For everyone else who has this problem, the default serial port settings are 115200 8N1 no hardware flow control.. This option is set by GRUB.


/klaus
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum