New Build 39800: BS 05-15-2019-r39800

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Wed May 15, 2019 17:57    Post subject: New Build 39800: BS 05-15-2019-r39800 Reply with quote
Downloads: (if a link doesn't work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/05-15-2019-r39800/
ftp://ftp.dd-wrt.com/betas/2019/05-15-2019-r39800/
Alternate link: DD-WRT website
Note: to use wget (or curl) for CLI flash (`write {f/w} linux`), change the https to http (or use ftp instead)

Changelogs:
SVN* changelog since last build: 39715
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. Since 39469, udhcpd was removed and replaced with the already present dnsmasq, and PIE qdisc was added for some builds.
5. Policy-Based Routing with SFE enabled was fixed in r39556: 5986 and 5900
6. k2.4 (broadcom/) builds were fixed in 39715 (broken in 39144 through 39654)

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?); GUI issues: 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears to be fixed for some routers (different kernels, modes, and radios) since build 39508.

Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Sponsor
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Wed May 15, 2019 19:53    Post subject: Reply with quote
Router: Netgear R6250
Fw version: DD-WRT v3.0-r39800 std (05/15/19)
Kernel: Linux 4.4.179 #47 SMP PREEMPT Wed May 15 12:23:57 CEST 2019 armv7l
Mode: PPPoE, AP (2,4 & 5Ghz), Wireguard, QoS (HTB+Fq_CoDel)
Status: Working

Like new "Client Lease Expiration" feature. Looks great...
Thx BS!

Also, there is windows WG client if someone is interested to test it https://www.wireguard.com/install/?downloadwindowsprealpha=1
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Wed May 15, 2019 21:53    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39800 std (05/15/19)
Kernel: Linux 4.4.179 #47 SMP PREEMPT Wed May 15 12:23:57 CEST 2019 armv7l
Previous: r39715
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working so far.

Uptime: 38m
Temperatures: CPU 68.6 °C / WL0 50.3 °C / WL1 54.1 °C
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Wed May 15, 2019 23:08    Post subject: Reply with quote
I CLI flashed 39800 over the r39747 test build for my WNDR4500v2, and can no longer access it. SSIDs are gone now, though the lights on the device (set up in Client Mode) look normal. Will have to investigate later; just a word of warning for k3.10 devices. :-/
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Thu May 16, 2019 2:33    Post subject: Reply with quote
jwh7 wrote:
I CLI flashed 39800 over the r39747 test build for my WNDR4500v2, and can no longer access it. SSIDs are gone now, though the lights on the device (set up in Client Mode) look normal. Will have to investigate later; just a word of warning for k3.10 devices. :-/


No issues here yet, but I didn't reset nvram. Console, SSH, and WebUI all working fine.
Will post when I get home in the morning.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Thu May 16, 2019 14:01    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-39800_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r39800 mega (05/15/19)
Kernel: Linux 3.10.108-d8 24393 Wed May 15 17:52:38 CEST 2019 mips
Previous: DD-WRT v3.0-r39715 mega (05/03/19)
Reset: No
Mode: Gateway/AP (5GHz band only, 2.4 radio disabled)
Uptime: ~12:45
Status: OK
Issues/Errors: Nothing new or out of the ordinary so far.
jwbraun
DD-WRT Novice


Joined: 22 Jun 2018
Posts: 18

PostPosted: Thu May 16, 2019 18:14    Post subject: Reply with quote
Router/Version: Asus RT-AC1900P
File: asus_rt-ac1900p-firmware.trx
Firmware: DD-WRT v3.0-r39800 std (05/15/19)
Kernel: Linux 4.4.179 #47 SMP PREEMPT Wed May 15 12:23:57 CEST 2019 armv7l
Reset: No
Mode: Gateway/AP
Uptime: ~13 hours
Status: OK
xflyboy
DD-WRT Novice


Joined: 03 Aug 2015
Posts: 9

PostPosted: Thu May 16, 2019 19:12    Post subject: Reply with quote
Router/Version: WRT 54G v5
File: dd-wrt.v24_mini_wrt54g 05-15-2019-r39800.bin
Kernel: Linux 2.4.37 #53502 Wed May 15 10:25:19 CEST 2019 mips
Mode: AP Client/Router
Status: Upgrade, reboot, no reset. GUI OK. Internet OK.
T_o_m
DD-WRT Novice


Joined: 11 Feb 2019
Posts: 10

PostPosted: Thu May 16, 2019 19:14    Post subject: Reply with quote
Router/Version: Asus RT-N12D1
File: dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Kernel: Linux 3.10.108-d8 #24393 Wed May 15 17:52:38 CEST 2019 mips
Mode: Gateway
Status: dont work

After instalation this version I have error Segmentation fault.

Code:

root@DD-WRT:~# cd /tmp
root@DD-WRT:/tmp# wget http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019
/05-15-2019-r39800/broadcom_K3X/dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Connecting to download1.dd-wrt.com (185.84.6.100:80)
root@DD-WRT:/tmp# md5sum dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
854241d958e2d6664b641d816fa03e14  dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
root@DD-WRT:/tmp# write dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx linux
freeram=[1990656] bufferram=[684032]
The free memory is not enough, writing image per 65536 bytes.
linux: CRC OK (0xCE78060F)0x00740000]
Writing image to flash, waiting a moment...
write block [7667712] at [0x00750000]
done [65536]
root@DD-WRT:/tmp# reboot
Segmentation fault
Segmentation fault
-sh: /tmp/.rc_shutdown: Permission denied
Segmentation fault


I have to use Asus restoration utility for repair router.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Thu May 16, 2019 20:44    Post subject: Reply with quote
xflyboy wrote:
Router/Version: WRT 54G v5
File: dd-wrt.v24_mini_wrt54g 05-15-2019-r39800.bin
Kernel: Linux 2.4.37 #53502 Wed May 15 10:25:19 CEST 2019 mips
Mode: AP Client/Router
Status: Upgrade, reboot, no reset. GUI OK. Internet OK.

Maybe you put this mini build on your WRT54G v4
I'm fairly sure you didn't get it to install on a WRT54G v5

No big harm but we just don't want some gufus to get the wrong idea and try it Twisted Evil
padaboana
DD-WRT Novice


Joined: 28 Dec 2013
Posts: 11

PostPosted: Thu May 16, 2019 21:46    Post subject: Can't mount USB Hdd Reply with quote
Hallo,

with this new build i can't mount my USB HDD.
I tried ext3 and ext4 format.

Linksys E4200
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Thu May 16, 2019 22:38    Post subject: Re: Can't mount USB Hdd Reply with quote
padaboana wrote:
Hallo,

with this new build i can't mount my USB HDD.
I tried ext3 and ext4 format.

Linksys E4200


Those kernel modules aren't in the build for the E4200 that I am aware of. The modules I know that are in the K3X builds are msdos, vfat, and fat.
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Fri May 17, 2019 5:54    Post subject: Reply with quote
T_o_m wrote:
Router/Version: Asus RT-N12D1
File: dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Kernel: Linux 3.10.108-d8 #24393 Wed May 15 17:52:38 CEST 2019 mips
Mode: Gateway
Status: dont work

After instalation this version I have error Segmentation fault.

Code:

root@DD-WRT:~# cd /tmp
root@DD-WRT:/tmp# wget http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019
/05-15-2019-r39800/broadcom_K3X/dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Connecting to download1.dd-wrt.com (185.84.6.100:80)
root@DD-WRT:/tmp# md5sum dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
854241d958e2d6664b641d816fa03e14  dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
root@DD-WRT:/tmp# write dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx linux
freeram=[1990656] bufferram=[684032]
The free memory is not enough, writing image per 65536 bytes.
linux: CRC OK (0xCE78060F)0x00740000]
Writing image to flash, waiting a moment...
write block [7667712] at [0x00750000]
done [65536]
root@DD-WRT:/tmp# reboot
Segmentation fault
Segmentation fault
-sh: /tmp/.rc_shutdown: Permission denied
Segmentation fault


I have to use Asus restoration utility for repair router.


This is from BS:

Quote:
you downloaded the file to router memory. you upgraded sucessfully. but your ram was out. so reboot wasnt working. just powercycle it and all is fine and upgrade it next time by web and not by wget
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri May 17, 2019 5:55    Post subject: Re: Can't mount USB Hdd Reply with quote
padaboana wrote:
Hallo,

with this new build i can't mount my USB HDD.
I tried ext3 and ext4 format.

Linksys E4200


the 8 mb firmware was oversized for 8 mb routers and does not include ext4 anymore. only ntfs and fat will work. unfortunatly there is no right firmware for 16 mb flash routers so far

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
T_o_m
DD-WRT Novice


Joined: 11 Feb 2019
Posts: 10

PostPosted: Fri May 17, 2019 6:47    Post subject: Reply with quote
Mile-Lile wrote:
T_o_m wrote:
Router/Version: Asus RT-N12D1
File: dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Kernel: Linux 3.10.108-d8 #24393 Wed May 15 17:52:38 CEST 2019 mips
Mode: Gateway
Status: dont work

After instalation this version I have error Segmentation fault.

Code:

root@DD-WRT:~# cd /tmp
root@DD-WRT:/tmp# wget http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019
/05-15-2019-r39800/broadcom_K3X/dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
Connecting to download1.dd-wrt.com (185.84.6.100:80)
root@DD-WRT:/tmp# md5sum dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
854241d958e2d6664b641d816fa03e14  dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx
root@DD-WRT:/tmp# write dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx linux
freeram=[1990656] bufferram=[684032]
The free memory is not enough, writing image per 65536 bytes.
linux: CRC OK (0xCE78060F)0x00740000]
Writing image to flash, waiting a moment...
write block [7667712] at [0x00750000]
done [65536]
root@DD-WRT:/tmp# reboot
Segmentation fault
Segmentation fault
-sh: /tmp/.rc_shutdown: Permission denied
Segmentation fault


I have to use Asus restoration utility for repair router.


This is from BS:

Quote:
you downloaded the file to router memory. you upgraded sucessfully. but your ram was out. so reboot wasnt working. just powercycle it and all is fine and upgrade it next time by web and not by wget


I upgraded version from 3.5.2019 (and 2 version before) by web a I had same problem.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum