KongPro (OpenWRT) - 2019 / 08 / 17

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3 ... 17, 18, 19  Next
Author Message
murtaza12
DD-WRT User


Joined: 19 Nov 2015
Posts: 119
Location: Pakistan

PostPosted: Mon May 13, 2019 3:49    Post subject: KongPro (OpenWRT) - 2019 / 08 / 17 Reply with quote
New builds based on OpenWRT 19.07 (17th August)

Download link:
https://www.desipro.de/openwrt/19.07/

Changelog:

08/17/19:
-kernel update 4.14.138
-musl lib update
-ohdcpd fix send ra on bridge link down

_________________
Active devices:
Netgear R7800 - Stock v1.0.2.63
Linksys EA8500 - OpenWRT 18.06.4
ASUS RP-AC68U - 3.0.0.4.382.40019


Last edited by murtaza12 on Sun Aug 18, 2019 12:41; edited 15 times in total
Sponsor
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1261

PostPosted: Mon May 13, 2019 13:41    Post subject: Reply with quote
yep working great here with qca99x0 official fw 10.4.1 no issue wlan throughput 1.5x ddwrt

r7500v2
vit5421
DD-WRT User


Joined: 12 Nov 2015
Posts: 421

PostPosted: Mon May 13, 2019 16:43    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.

_________________
Netgear R7800
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Mon May 13, 2019 18:22    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
vit5421
DD-WRT User


Joined: 12 Nov 2015
Posts: 421

PostPosted: Mon May 13, 2019 20:26    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.


Thank you Kong.
How do you like and estimate OpenWRT performance and latency compare to DDWRT (3.18 and 4.9) builds?

_________________
Netgear R7800
slidermike
DD-WRT Guru


Joined: 11 Nov 2013
Posts: 1486
Location: USA

PostPosted: Mon May 13, 2019 21:54    Post subject: Reply with quote
Just upgraded from voxel stock fork.
Set as AP.
Will monitor for stability and performance.

_________________
Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode

R7000 specific Tips/Tricks.
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=264152
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Tue May 14, 2019 10:10    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
vit5421 wrote:
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.


Thank you Kong.
How do you like and estimate OpenWRT performance and latency compare to DDWRT (3.18 and 4.9) builds?


Pretty much the same performance, but at least on my vdsl line cake gives the best latency I have ever seen.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1261

PostPosted: Tue May 14, 2019 12:12    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
<Kong> wrote:
Pretty much the same performance, but at least on my vdsl line cake gives the best latency I have ever seen.


what're your line speed and qos speed?
ho1Aetoo
DD-WRT Novice


Joined: 19 Feb 2019
Posts: 20

PostPosted: Wed May 15, 2019 9:43    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.


For me is the Wifi-Performance poor.
I get with the Open-WRT Build with vht80 2x2 MIMO with my Intel 8265 only stable 300mbit (RX) 400mbit (TX)

DD-WRT v3.0-r37495M >>

[SUM] 0.00-15.00 sec 859 MBytes 480 Mbits/sec receiver (RX)
[SUM] 0.00-15.00 sec 1.04 GBytes 597 Mbits/sec receiver (TX)

..and the wlan does not start anymore if you change anything via the webinterface (restart interface etc.)
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed May 15, 2019 12:40    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
ho1Aetoo wrote:
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.


For me is the Wifi-Performance poor.
I get with the Open-WRT Build with vht80 2x2 MIMO with my Intel 8265 only stable 300mbit (RX) 400mbit (TX)

DD-WRT v3.0-r37495M >>

[SUM] 0.00-15.00 sec 859 MBytes 480 Mbits/sec receiver (RX)
[SUM] 0.00-15.00 sec 1.04 GBytes 597 Mbits/sec receiver (TX)

..and the wlan does not start anymore if you change anything via the webinterface (restart interface etc.)


Same channel/txpower according to iw <interface> status?

Otherwise it would be unfair, also make on the intel cards to test with -P 4 or more streams when running iperf.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed May 15, 2019 13:40    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


I just did some maths, if you get 640mpbs, then we are talking about at least a 3x3 device and in that case your 640mbps are rather poor. A 2x2 device can theoretically do 610Mbps real throughput.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
vit5421
DD-WRT User


Joined: 12 Nov 2015
Posts: 421

PostPosted: Wed May 15, 2019 15:24    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


I just did some maths, if you get 640mpbs, then we are talking about at least a 3x3 device and in that case your 640mbps are rather poor. A 2x2 device can theoretically do 610Mbps real throughput.


My be i am wrong but i have constantly 80Mbyte/sec on oem/voxel with 2x2 intel 9650 and much lower on ddwrt ( around 60).

_________________
Netgear R7800
ho1Aetoo
DD-WRT Novice


Joined: 19 Feb 2019
Posts: 20

PostPosted: Wed May 15, 2019 18:17    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
<Kong> wrote:
ho1Aetoo wrote:
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


With 866 connection rate? I just did a test with 866 connection rate and I get 510Mbps.


For me is the Wifi-Performance poor.
I get with the Open-WRT Build with vht80 2x2 MIMO with my Intel 8265 only stable 300mbit (RX) 400mbit (TX)

DD-WRT v3.0-r37495M >>

[SUM] 0.00-15.00 sec 859 MBytes 480 Mbits/sec receiver (RX)
[SUM] 0.00-15.00 sec 1.04 GBytes 597 Mbits/sec receiver (TX)

..and the wlan does not start anymore if you change anything via the webinterface (restart interface etc.)


Same channel/txpower according to iw <interface> status?

Otherwise it would be unfair, also make on the intel cards to test with -P 4 or more streams when running iperf.


Testet with several parallel streams ( 2-8 ) and same channels.
But the transmit-power has in OpenWrt other limits.
26 vs 30dB (dd-wrt / UNII-2 Extended 5470 - 5725Mhz) with regulatory domain germany (option country 'DE')

I usually get < 300mbit throughput on the devices with a single antenna.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed May 15, 2019 22:18    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
jerrytouille wrote:
<Kong> wrote:
Pretty much the same performance, but at least on my vdsl line cake gives the best latency I have ever seen.


what're your line speed and qos speed?


Here are my latest results, with high res bufferbloat as I just fixed my cables in the house.

http://www.dslreports.com/speedtest/49723487 without qos
http://www.dslreports.com/speedtest/49723765 with cake piece of cake linklayer vdsl overhead 8 bit set to 90000 31000


P.S. I used to run dsl and 100Mbit through one network cable, now I added another 2 wire cable so I can fully use my network cable for gigabit, now my downlod rate improved by about 10%. Man adding this cable was some shit, needed several attempts to pull it through a 20m long pipe that is embedded in my concrete ceiling. But was worth the effort.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed May 15, 2019 22:39    Post subject: Re: KongPro (OpenWRT) build - 2019/05/12 Reply with quote
vit5421 wrote:
<Kong> wrote:
vit5421 wrote:
murtaza12 wrote:
Had about 19 days of uptime on the previous build, no problems whatsoever.


Just flashed the latest 05/12 build on both R7800s:



Its very great to hear. 
I cant load the Kong Pro build now but what is the maximum real throughput on AC 80mhz from local source?
I have 640mbs on Voxel.


I just did some maths, if you get 640mpbs, then we are talking about at least a 3x3 device and in that case your 640mbps are rather poor. A 2x2 device can theoretically do 610Mbps real throughput.


My be i am wrong but i have constantly 80Mbyte/sec on oem/voxel with 2x2 intel 9650 and much lower on ddwrt ( around 60).


How much do you get in 160Mhz mode?

For 80Mhz not sure whose fault it is, if win miscalculates or if iperf does something stupid. I also just did a transfer to my nas from win 10 with a Intel AC 9560 and the windows dialog displays:

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Goto page 1, 2, 3 ... 17, 18, 19  Next Display posts from previous:    Page 1 of 19
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum