Linksys E1700 OpenVPN Client Config (to Netgear X6 R8000)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
sunnyd24
DD-WRT Novice


Joined: 30 Sep 2010
Posts: 4

PostPosted: Tue May 07, 2019 17:14    Post subject: Linksys E1700 OpenVPN Client Config (to Netgear X6 R8000) Reply with quote
Hi,

Can anyone help with a OpenVPN client connection on the Linksys E1700 (running DD-WRT v3.0-r37305)?

I would like to connect to an OpenVPN service (running on a Netgear X6 R8000 Nighthawk router with stock firmware) and retrieve an IP address on the remote subnet mask (e.g. 192.168.0.x), if possible.

When using an OpenVPN client on a Windows PC, I can successfully retrieve an internal IP address (192.168.0.24) and access the local network (pings to R8000 router work on 192.168.0.1).

On the E1700, I currently have a "CONNECTED SUCCESS" status in OpenVPN Status but I can't get the client to provide a useful IP address. The local address and remote address varies but is normally "192.168.254.2" or "192.168.254.3" or "192.168.254.4" (cannot ping R8000 router work on 192.168.0.1).

The OpenVPN Client has the following settings:

Server IP/Name: xxxxx.xxxxxxxxx.com
Port: 12973
Tunnel Device: TUN
Tunnel Protocol: UDP
Encryption Cipher: AES-128 CBC
Hash Algorithm: None
User Pass Authentication: Disable
Advanced Options: Enable
LZO Compression: Adaptive
NAT: Enable
Firewall Protection: Enable
IP Address: "blank"
Subnet Mask: "blank"
Tunnel MTU setting: 1500
Tunnel UDP Fragment: "blank"
Tunnel UDP MSS-Fix: Disable
nsCertType verification: "unchecked"
CA cert: as per file
Public Client Cert: as per file
Private Client Key: as per file
Additional Config:
resolv-retry infinite
nobind
persist-key
persist-tun


Please can someone review the setting above and advise if I am missing something? I would like to communicate with the remote VPN local network (192.168.0.x)?

Thanks.

Kind regards,
Sunny
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum