[xtremegamer]

Hi all,

I would like to pass ethernet frames trough a tunnel and back, i think this is possible with a L2TPv3 Psuedowire.

Let me clearify with a drawing that i have included.

So i have a Set-top box that gets a different ip-adress from my isp in order to connect to their internal network(dmz)

It does that by checking its ethernet ports for a specific mac-adress and request dhcp from their internal server (10.x.x.x) & gets a LAN ip adress on the same interface from the modem's DHCP.

Now what i want to achieve is, make it so that the tunnel is transparent for the device & modem.

In short, the modem needs to see the mac-adress of the Set-top box.

What i want or i think i need todo is bridge the tunnel interface with port 2 of my remote router and also connect it to my modem.

If needed i can do the same on my router so it's really transparent or so it would not confuse the set-top box.

MY SIDE:
Router : Linksys WRT1900ACS running ddwrt

Remote SIDE:
Router : TP-link TL-WR1043ND running ddwrt

If their are any questions please let me know.

Thanks in advance,

Xtremegamer