Author
Message
jfreak53 DD-WRT Novice Joined: 17 Mar 2013 Posts: 10
Posted: Tue Apr 23, 2019 17:26 Post subject: Netgear R7000 VLAN Tagging Smart Switch
I've got a Linksys managed switch setup with VLAN tagging on a couple ports. Everything connected up to eth0 (port 1) on the netgear. I'm trying to tag VLAN ID 3 as a separate DHCP set of addresses.
It's just not working for me, the computers on the rest of the network work fine, all have IP's through the standard DHCP setup, but the port 4 on the switch set to VLAN 3 won't get an IP.
Am I missing something in my setup of the VLAN on DDWRT or does the netgear not support this feature?
I've got Kong build v3.0-r37015M 9/23/18.
Switch VLAN Config:
Netgear R7000 setup:
Back to top
Sponsor
jfreak53 DD-WRT Novice Joined: 17 Mar 2013 Posts: 10
Posted: Wed Apr 24, 2019 11:59 Post subject:
Any thoughts? Does this broadcom support the tagged VLAN?
Back to top
jfreak53 DD-WRT Novice Joined: 17 Mar 2013 Posts: 10
Posted: Mon Apr 29, 2019 15:16 Post subject:
Any ideas?
Back to top
Per Yngve Berg DD-WRT Guru Joined: 13 Aug 2013 Posts: 6870 Location: Romerike, Norway
Posted: Mon Apr 29, 2019 18:53 Post subject:
Broadcom does not support vlan tagging in the GUI. Remove it.
Post the output of "nvram show | grep vlan.*ports"
The port is tagged by adding a t as suffix to the port.
Back to top
jwh7 DD-WRT Guru Joined: 25 Oct 2013 Posts: 2670 Location: Indy
Posted: Tue Apr 30, 2019 14:58 Post subject:
Might also help to go thru the VLAN Category wiki's e.g.:
https://wiki.dd-wrt.com/wiki/index.php/Switched_Ports
Scroll to the bottom for more, but note many of those article are pretty old. :-/
But it prob won't help as much as Per Yngve Berg _________________# NAT/SFE /CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ , Builds , Types , Modes , Changes , Demo #
OPNsense x64 5050e ITX|DD : DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250 |FreshTomato: F7D8302@532 |OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Back to top