Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 8:17 Post subject:
could please someone send me a screenshot of the setup/index page where the dhcp config is shown? i made several changes. mode noticable "use dnsmasq for dns" if this was disabled in the past. unbound/recusive dns would not work but just the isp dns was used without dnsmasq caching support. i changed this behaviour so that unbound will be used if this setting is enabled or disabled (no matter what) if recursive dns is used. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 8:21 Post subject: Re: DIR 862L
clifton wrote:
In the NAS tab I cannot make changes or apply settings. Seems like everything is stuck on this page.
This has been true for the last several builds. The last one that worked for me was r38937.
So I can't really use any of the recent builds because I rely on NAS storage attached to the router.
I've tried complete power down and restart, but no effect. As soon as I flash to the earlier build, all is working again.
which device are you using? _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Mon Apr 15, 2019 8:43 Post subject:
@BS just my thoughts, We had the same problem in the latest Kong build for broadcom.
Kong was quick to correct it.
As far as I understood the problem was at first that he did not compile the raid stuff with his build and apparantly if raid was not compiled you could not change/save/apply anything on the NAS page because of javascript errors.
He then included the raid stuff and from that moment the problems were gone.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 8:53 Post subject:
egc wrote:
@BS just my thoughts, We had the same problem in the latest Kong build for broadcom.
Kong was quick to correct it.
As far as I understood the problem was at first that he did not compile the raid stuff with his build and apparantly if raid was not compiled you could not change/save/apply anything on the NAS page because of javascript errors.
He then included the raid stuff and from that moment the problems were gone.
i know. thats why i want to know the device to correct the bug in clean way. just by reproducing it _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 10:22 Post subject:
the nas issue is fixed now _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
I'm assuming this isn't in a build/release yet? I'm having the NAS issue on a TP-Link Archer C1900 and just installed the r39508 release from yesterday. Another user is having a problem with an E2500V3 repeater. Here's the thread:
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Mon Apr 15, 2019 13:40 Post subject:
BrainSlayer wrote:
could please someone send me a screenshot of the setup/index page where the dhcp config is shown? i made several changes. mode noticable "use dnsmasq for dns" if this was disabled in the past. unbound/recusive dns would not work but just the isp dns was used without dnsmasq caching support. i changed this behaviour so that unbound will be used if this setting is enabled or disabled (no matter what) if recursive dns is used.
R9000
Hope this helps: _________________ FORUM RULES
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 18:32 Post subject:
there are that many custom options. you know maybe that some of these options are already included. they may collide. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 18:39 Post subject:
root@ALPINE:/tmp# ./dnsmasq --conf-file=/tmp/dnsmasq.conf dnsmasq: illegal repeated keyword at line 19 of /tmp/dnsmasq.conf
thats the answer. your addition dnsmasq options fucks up everything. cache-size=2048 is duplicated _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Apr 15, 2019 18:43 Post subject:
MichaelC wrote:
BrainSlayer wrote:
the nas issue is fixed now
I'm assuming this isn't in a build/release yet? I'm having the NAS issue on a TP-Link Archer C1900 and just installed the r39508 release from yesterday. Another user is having a problem with an E2500V3 repeater. Here's the thread:
no i just fixed it at the time of writing of course _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Tue Apr 16, 2019 8:08 Post subject:
just as a update. the next update will contain a setting for configuring the cache size and will ignore the local cache size setting if you defined it in the additional configs _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
