Best build for the wrt1900ac v1. Build r31924

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3, 4, 5
Author Message
Esprit1st
DD-WRT Novice


Joined: 19 Nov 2017
Posts: 11

PostPosted: Tue Aug 28, 2018 0:45    Post subject: Reply with quote
So I went and updated my WRT1900AC V1 from r36168 to r36645.
I definitely had issues with the second radio on 5g. My cellphone will indicate connected but no internet after a few hours of working just fine. It doesn't do that on any other wifis.

Will see how this release does.
Sponsor
Esprit1st
DD-WRT Novice


Joined: 19 Nov 2017
Posts: 11

PostPosted: Fri Aug 31, 2018 0:46    Post subject: Reply with quote
Just wanted to update and say that my cellphone doesn't have the connection problems with r36645 for some reason. Everything seems to work fine.
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 983
Location: South of Heaven, USA

PostPosted: Fri Aug 31, 2018 1:02    Post subject: Reply with quote
Esprit1st wrote:
Just wanted to update and say that my cellphone doesn't have the connection problems with r36645 for some reason. Everything seems to work fine.

Android or iOS ?

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
cgcarloslink
DD-WRT Novice


Joined: 12 Apr 2018
Posts: 6

PostPosted: Fri Oct 12, 2018 20:47    Post subject: Bricked WRT1900AC Reply with quote
Picked up this WRT1900ac that has a constant power on and sata led when powered on. Thinking I might be able to revive it. I accessed the serial port and I have attached a picture of what comes up in putty when I turn it on. Can this router be recovered? If the NAND flash is corrupt is this router garbage. Is there away to load back to the NAND flash?

Last edited by cgcarloslink on Fri Oct 12, 2018 22:38; edited 1 time in total
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7130
Location: Columbus, Ohio

PostPosted: Fri Oct 12, 2018 21:11    Post subject: Reply with quote
Smaller picture.
_________________
I am far from a guru, I'm barely a novice.
pmckay
DD-WRT Novice


Joined: 26 Aug 2006
Posts: 22
Location: Brooklyn, NY

PostPosted: Sat Nov 10, 2018 22:33    Post subject: Reply with quote
is R31924 still the best firmware for wrt1900ac v1?
_________________
Linksys WRT1900AC V1
ATHF
DD-WRT Guru


Joined: 14 Dec 2015
Posts: 681
Location: 127.0.0.1

PostPosted: Sun Nov 11, 2018 6:06    Post subject: Reply with quote
pmckay wrote:
is R31924 still the best firmware for wrt1900ac v1?


It may depend on what you are using it for, I haven't been on as much as I used to be.
Mine is just used as an AP, and has been up 48 days.

_________________
Tutorial for flashing WRT series
WRT Installation,Upgrade & Basic Setup–Cliff Notes
DD-WRT Firmware: r39144: WRT3200ACM, WRT1200ACv1, WRT1900ACv1
Velop:3 WHW0101, RE6500, RE9000
TWC/Spectrum - 300/25
SysLog Watcher 5, Security Onion on Virtual Box, Fingboxes, PiHoles
Esprit1st
DD-WRT Novice


Joined: 19 Nov 2017
Posts: 11

PostPosted: Thu Nov 15, 2018 3:03    Post subject: Reply with quote
spuriousoffspring wrote:
Esprit1st wrote:
Just wanted to update and say that my cellphone doesn't have the connection problems with r36645 for some reason. Everything seems to work fine.

Android or iOS ?


Sorry for the extremely late reply. I didn't get notified about the new posts.

It's an Android Phone.
Yemble
DD-WRT Guru


Joined: 17 Feb 2010
Posts: 570
Location: Yorkshire (GOC)

PostPosted: Sun Dec 02, 2018 11:34    Post subject: Reply with quote
pmckay wrote:
is R31924 still the best firmware for wrt1900ac v1?

No. I think we got over the major instability hurdle some time ago now. All builds over the last few months have been fine for me on the v1 (Dec 2018).

_________________
Linksys WRT32X v1 - r40134
Linksys WRT1900AC v1 - r40134
TP-Link Archer C9 v1 - r40134
Firmware: ftp://ftp.dd-wrt.com/betas/2019/
WENED
DD-WRT User


Joined: 30 May 2017
Posts: 249
Location: Rural Manitoba

PostPosted: Sun Dec 30, 2018 3:12    Post subject: Last stble build for 1200 and 1900 V1's Reply with quote
Decided to upgrade all my routers to r38132

WRT3200acm - appears good and no concerns

WRT120AC V1 & WRT1900AC V1
Totally different story. All went well with the upgrades but had problems with;
1 - As WDS Stations both routers worked fine until I changed the WDS AP to channel 149 from 100. Since I use a virtual AP on the WDS Station, I lost connectivity and when scanning wit Acrylic I noticed that the virtual interface was on channel 100 while the AP was on 149. I thought maybe it was a reset issue but no chance. Both routers exhibited the same weird effect. I reverted the 1200 back to r37012 and all works fine.
2 - After the upgrade my LENOVO PAD would not connect to either router even though nothing was changed in the configuration.

The 3200's on the other hand were totally successful in the upgrade and did not exhibit the quirks of the old V1's

Reverted 1200 and 1900's to r37139 as it appears it was the last build that did not have the problems mentioned above.
_________________

_________________
WRT3200acm Master 5GHz AP r40009
WRT3200acm Client-Bridge r40009
WRT1900Ac V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1200AC V1 SPARE r40009
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
12 WiFi cameras, 4 desktops, 1 laptop, 10 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
roycruse
DD-WRT Novice


Joined: 18 Mar 2019
Posts: 2

PostPosted: Mon Mar 18, 2019 11:19    Post subject: Reply with quote
Hi can i ask who determines what builds get put against the WRT3200ACM in the router database.

the last build in that list is 37305 ?

is this regarded as the last "supported" beta build for this router and is going to any of the builds since then considered "bleeding edge" or is it simply a case of this not getting updated as often as it should

many thanks
Yemble
DD-WRT Guru


Joined: 17 Feb 2010
Posts: 570
Location: Yorkshire (GOC)

PostPosted: Mon Mar 18, 2019 15:19    Post subject: Reply with quote
roycruse wrote:
Hi can i ask who determines what builds get put against the WRT3200ACM in the router database.

the last build in that list is 37305 ?

is this regarded as the last "supported" beta build for this router and is going to any of the builds since then considered "bleeding edge" or is it simply a case of this not getting updated as often as it should

many thanks


Wrong thread really.

However, ignore the "official" DD-WRT database as it is rarely maintained. Link to the latest builds are in my sig, below...

_________________
Linksys WRT32X v1 - r40134
Linksys WRT1900AC v1 - r40134
TP-Link Archer C9 v1 - r40134
Firmware: ftp://ftp.dd-wrt.com/betas/2019/
217R
DD-WRT Novice


Joined: 19 Mar 2019
Posts: 3

PostPosted: Mon Apr 15, 2019 14:19    Post subject: Reply with quote
spuriousoffspring wrote:
Here is Kong's Return to Stock Firmware file.

Upload via DD-WRT GUI Administration Tab - Firmware Upgrade Sub Tab.

This is for the WRT1900AC v1 ONLY!

*After successfull flash you will need to Update Linksys Firmware.
This can be done in the Linksys Firmware Administration Section.


Can it use for ddwrt V.3 R37305? cause i try so many times always failed, anyinfo?
WENED
DD-WRT User


Joined: 30 May 2017
Posts: 249
Location: Rural Manitoba

PostPosted: Mon Apr 15, 2019 14:37    Post subject: Reply with quote
Esprit1st wrote:
So I went and updated my WRT1900AC V1 from r36168 to r36645.
I definitely had issues with the second radio on 5g. My cellphone will indicate connected but no internet after a few hours of working just fine. It doesn't do that on any other wifis.

Will see how this release does.


I currently am running r39469 on my V1 and it is the most stable I have seen to date. However, there have been some notes about DHCP acting up but since I don't use my V1 as a master I haven't seen any issues. Incidentally the latest release r39508 has supposedly corrected the DHCP problem which I do have on my 3200 master and is working fine. If you don't like the most recent builds it is not a big issue to switch back anyway, so I would suggest you give it a try.

_________________
WRT3200acm Master 5GHz AP r40009
WRT3200acm Client-Bridge r40009
WRT1900Ac V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1200AC V1 SPARE r40009
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
12 WiFi cameras, 4 desktops, 1 laptop, 10 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
Goto page Previous  1, 2, 3, 4, 5 Display posts from previous:    Page 5 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum