Flashed it on R7800 using webif (no reset) and looks good. No issues.
Btw, dslreports website is having issues now as it's not completing the test! _________________ Netgear R7800 [DD-WRT]; ASUS RT-87U [DD-WRT]; ASUS RT-AC68U [FreshTomato]
EA8500
DD-WRT v3.0-r39345M kongat (04/02/19)
Linux 4.9.166 #381 SMP Tue Apr 2 16:14:03 CEST 2019 armv7l
No Reset --- GUI install over r38065M
Main router --
radios good
30 static leases
local DNS
port range forwarding
samba share USB Ext4 flash drive
Isolated network ---VLAN on port4 + ath0.1 & ath1.1 via br1
HFSC FQ_CODEL
ovpn server
Temp --- CPU 65.741 °C / ath0 52 °C / ath1 57 °C
tis all seems good to me so far
The r39000M I run for awhile seemed to have some minor wireless quirks ... that's why I went back to the r38065M few days ago
What are you doing to your router as the temps are so high?
Mine: CPU 49.29 °C / ath0 43 °C / ath1 43 °C
I have 35 static leases but have about 15 - 20 devices connected at a time. _________________ Netgear R7800 [DD-WRT]; ASUS RT-87U [DD-WRT]; ASUS RT-AC68U [FreshTomato]
ddup --flash-remote-> could never reconnect
Reset with button finally reconnected with ethernet
Wireless wouldn't connect
Reset again connected with ethernet
Flashed back to 39000 & applied backup file
Flashed 39345 w/GUI
All seems well now
Not my day I guess
Router: Netgear R7800
Firmware: DD-WRT v3.0-r39345M kongat (04/02/19)
Kernel: Linux 4.9.166 #380 SMP Tue Apr 2 15:57:23 CEST 2019 armv7l
Status: Working
Reset: No
Previous: 39000M
Errors: No
Temperatures : CPU 45.348 °C / ath0 21 °C / ath1 21 °C
Working very well :
Router mode : DHCP
SFE Enable STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
ath0, ath1
Vpn (OpenVPN Client)
Looks good, not sure what was going on with all the problems I was having with both the R7800 and EA8500 with the Radio Scheduling but all is good on EA8500 now
Router Model Linksys EA8500
Firmware Version DD-WRT v3.0-r39345M kongat (04/02/19)
Kernel Version Linux 4.9.166 #381 SMP Tue Apr 2 16:14:03 CEST 2019 armv7l
Current Time Wed, 03 Apr 2019 10:52:34
Uptime 11:45
Kong thank you for continuing to support dd-wrt builds even as you are working on other projects. Many people appreciate your efforts. Let me know if there's any way I can help.
Joined: 17 Jan 2018 Posts: 64 Location: Georgia, USA
Posted: Thu Apr 04, 2019 18:43 Post subject:
DD-WRT v3.0-r39345M kongat (04/02/19)
Router Model: r7800
Status: runs well - update by GUI from r39000M kongat
Reset: No
Errors: None
Up 6 hours with no noticed problems. Seems very responsive.
Not using QoS _________________ R7800 r53339 std (08/01/23)
Private network on bridge br0 = eth1 (vlan 1) + wlan0 + wlan1.
Guest network on bridge br1 = eth1.4 (vlan 4) + VAPs (wlan0.1 + wlan1.1) for IOT devices
(Roku's, Amazon Echos, smart switches, etc.) and guest.
Noob still finding my way.
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 6"
swconfig dev switch0 vlan 4 set ports "3 4 6t"
swconfig dev switch0 set apply
vconfig add eth1 4
brctl addif br1 eth1.4
ifconfig eth1.4 up
Last edited by sweatbee on Fri Apr 05, 2019 9:37; edited 1 time in total
I Updated new build from 37495M but Wifi Not Run, Channel is Unknown, Lan ok.
R7800.
screenshot settings nvram erase setup from scratch
I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.