New Build 39296: BS 03-27-2019-r39296

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2338
Location: Indy

PostPosted: Wed Mar 27, 2019 22:34    Post subject: New Build 39296: BS 03-27-2019-r39296 Reply with quote
Downloads: (if a link doesn't work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/03-27-2019-r39296/
ftp://ftp.dd-wrt.com/betas/2019/03-27-2019-r39296/
Alternate link: DD-WRT website
Note: to use wget (or curl) for CLI flash (`write {f/w} linux`), change the https to http, or use ftp (curl only)

Changelogs:
SVN* changelog since last build: 39290
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issue #4 below).
4. R6400v2 support added in r36811-36818, 36825, and 36826. R6700v3 support added in r36828-36840.

Issues, observations, and/or workarounds reported:
1. (egc) Policy-Based Routing broken if SFE enabled: 5900
quarkysg's PBR+SFE fix: 5986
2. Trendnet 81*DRU models are missing factory-to-flash
3. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
4. WDS does not work on ARM devices (only MIPS<->MIPS)
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
6. K2.6 builds are broken since 38253(?); GUI issues: 6538
7. High CPU usage (on httpd?) occurring for some configurations: 6555
Try `stopservice httpd` from ssh/telnet and report back. To flash another build, stop httpd and use CLI flash.

Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 19.7.5|EA6900v1.1@1GHz FT 2019.3b|DD 41218: WNDR4500v2, WNDR4000@533, E1500@353, R6300v1,
2*E2500, WRT54*@250: GLv1.1 nsg, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod
Sponsor
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2338
Location: Indy

PostPosted: Thu Mar 28, 2019 1:52    Post subject: Reply with quote
Since the only updates here are for BCM ARM devices (driver updates for Northstar), I'm not going to bother with this one.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 19.7.5|EA6900v1.1@1GHz FT 2019.3b|DD 41218: WNDR4500v2, WNDR4000@533, E1500@353, R6300v1,
2*E2500, WRT54*@250: GLv1.1 nsg, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2014
Location: Texas, USA

PostPosted: Thu Mar 28, 2019 1:56    Post subject: Reply with quote
jwh7 wrote:
Since the only updates here are for BCM ARM devices (driver updates for Northstar), I'm not going to bother with this one.


Me either. I think I'm going to only look at the changelog to see if anything really affects me at this point. Otherwise, it's unnecessary flash wear. Honestly, public betas should be released once a month. I guess there's not enough testers of nightly builds anymore... Rolling Eyes
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 279

PostPosted: Thu Mar 28, 2019 4:24    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39296 std (03/27/19)
Kernel: Linux 4.4.177 #4 SMP Wed Mar 27 08:40:31 CET 2019 armv7l
Previous: r39290
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No issues so far.

Uptime: 27m
Temperatures: CPU 66.4 °C / WL0 49.3 °C / WL1 53.0 °C
eginnc
DD-WRT Novice


Joined: 23 Jul 2017
Posts: 49

PostPosted: Thu Mar 28, 2019 11:03    Post subject: Reply with quote
Router Model: TP-Link Archer C9v1 (BCM4709 1GHz & BCM4360)
Firmware: DD-WRT v3.0-r39296 std (03/27/19)
Kernel: Linux 4.4.177 #6 SMP Wed Mar 27 08:57:46 CET 2019 armv7l
Status: 2.4 and 5 GHz WAPs for Edgerouter X, 2.4 and 5GHz Guest VAPs, NAS(ext4), Samba, switch for PC; USB Print Server; using VAP workaround startup commands: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
Reset: No
Issues: None

_________________
TP-Link Archer C7v2(US) (dd-wrt r40932)
Linksys EA8500 (OpenWrt 18.06.4)
Edgerouter X (OpenWrt 18.06.4)
dragonC
DD-WRT User


Joined: 23 May 2015
Posts: 202

PostPosted: Thu Mar 28, 2019 11:38    Post subject: Reply with quote
My startup scripts saved in /jffs/etc/config/*.startup are not picked-up/executed on boot in this build.

Has anyone gotten startup-scripts to run on this build?
alienlovesecrets
DD-WRT Novice


Joined: 06 Oct 2017
Posts: 8

PostPosted: Thu Mar 28, 2019 17:15    Post subject: Reply with quote
Router/Version: Linksys E3200
Firmware: DD-WRT v3.0-r39296 std (03/27/19)
Kernel: Linux 3.10.108-d8 #23726 Wed Mar 27 15:17:12 CET 2019 mips
Previous: r39290 (work so bad in this unit)
Mode/Status: Repeater Bridge / Router
Reset: no
Issues/Errors: No issues so far.
Uptime: T55 min, Thu, 28 Mar 2019 14:13:32
Temperatures: WL0 44.6 °C [/quote]
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1462
Location: Belgrade

PostPosted: Thu Mar 28, 2019 21:36    Post subject: Reply with quote
Router Model Netgear R6250
Firmware Version DD-WRT v3.0-r39296 std (03/27/19)
Kernel Version Linux 4.4.177 #4 SMP Wed Mar 27 08:40:31 CET 2019 armv7l

Status: OK
Reset: No
Errors: None

Thx BS!
MrPickles
DD-WRT Novice


Joined: 14 Jan 2017
Posts: 26

PostPosted: Fri Mar 29, 2019 9:02    Post subject: Reply with quote
Netgear r7000

Quick question...

Can I replace a kong .chk directly with a bs webflash.bin?

Thanks
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 3962
Location: Netherlands

PostPosted: Fri Mar 29, 2019 12:20    Post subject: Reply with quote
Yes, but I would reset to defaults after uploading the BS version and put settings in manually.

But I am on the cautious side, you could try without a reset and only reset if you have "strange" behaviour.

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 293
Location: Bakersfield, CA

PostPosted: Fri Mar 29, 2019 13:12    Post subject: Reply with quote
Router/Version: 2x Linksys E3000
Firmware: dd-wrt.v24-39296_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-39230_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #23726 Wed Mar 27 15:17:12 CET 2019 mips
Mode: Both are client bridges with all settings not required for a bridge turned off.
Status: Working so far! Will report back if something comes up.

Router/Version: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r39296 mini (03/27/19)
Previous: DD-WRT v3.0-r39230 mini (03/19/19)
Kernel: Linux 4.4.177 #7 Wed Mar 27 09:02:15 CET 2019 armv7l
Mode: AC-only client bridge with only required settings turned on.
Status: So far so good.

Router/Version: Linksys E1200 v2
Firmware: dd-wrt.v24-39296_NEWD-2_K3.x_mega-e1200v2.bin
Previous: dd-wrt.v24-39230_NEWD-2_K3.x_mega-e1200v2.bin
Kernel: Linux 3.10.108-d8 #23726 Wed Mar 27 15:17:12 CET 2019 mips
Mode: Guest repeater, used -very- rarely, but it works as intended.
Status: Working so far.

_________________

Deployed Routers:
Netgear R7000 - 3x Kong's 40270M (Gateway: USB /w Entware, Stubby, DoT & DoH, QoS)
Linksys E3000 - 2x build 41218M (Client Bridges)
Linksys E900 - 1x build 40723M (Work Client)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
uziq
DD-WRT User


Joined: 02 Jan 2008
Posts: 62

PostPosted: Fri Mar 29, 2019 22:39    Post subject: Reply with quote
Router/Version: Netgear R6400v2
File: netgear-r6400v2-webflash.bin
Kernel: Linux 4.4.177 #4 SMP Wed Mar 27 08:40:31 CET 2019 armv7l
Mode: Gateway
Status: All good


Router/Version: Linksys WRT54GL v1.1
Tried flashing from dd-wrt.v24_voip_generic.r38159 to wrt.v24_voip_generic.r39296, and the router is now bricked (flashing power light, 30/30/30 reset doesn't help, can't ping, etc). Sad
I knew the risk, but will probably not bother trying a JTAG fix. It was nearing the end of it's life anyway.


Last edited by uziq on Sat Apr 06, 2019 22:48; edited 3 times in total
DomFrance
DD-WRT Novice


Joined: 31 Mar 2019
Posts: 1

PostPosted: Sun Mar 31, 2019 17:30    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39296 std (03/27/19)
Kernel: Linux 4.4.177 #4 SMP Wed Mar 27 08:40:31 CET 2019 armv7l
Previous: OEM Netgear latest version
Mode/Status: AP / working
Reset: yes
Issues/Errors: NTP not working yet (didn't investigate)

Uptime: 6h51m
Temperatures: CPU 59.1 °C / WL0 46.0 °C / WL1 47.5 °C
thommy181
DD-WRT Novice


Joined: 16 Mar 2019
Posts: 30
Location: Szczecin, Poland EU

PostPosted: Mon Apr 01, 2019 22:13    Post subject: Reply with quote
Router/Version: Netgear WNR3500L v2
File: dd-wrt.v24-39296_NEWD-2_K3.x_mega-WNR3500Lv2.chk
Kernel: Linux 3.10.108-d8 #22809 Wed Feb 6 14:05:03 CET 2019 mips
Mode: Internet Gateway and WI-FI AP
Previous version: r38581M giga (02/06/19)
Status: I can't update device

I have an information about file is too big for linux; linux wrong argument. I can't install any newest version than r38581M
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 577
Location: Hung Hom, Hong Kong

PostPosted: Wed Apr 03, 2019 4:42    Post subject: DD-WRT BS build 39296 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U(rev. A1)
Firmware: DD-WRT v3.0-r39296 std (03/27/19)
Kernel: Linux 4.4.177 #8 Wed Mar 27 09:04:36 CET 2019 armv7l
Previous: DD-WRT v3.0-r39267 std (03/22/19)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (not 24/7 & not using IPv6, VAP, VPN, NAS nor USB)
Reset: NO reset during firmware upgrade

1. Unplugging cable did NOT turn off the LAN LED.
With USB Service enabled but no automatic mount, LED in USB flash drive kept flashing

2. Error(s) logged:
Code:
grep -i err /var/log/messages

Jan  1 00:00:12 RT-N18U kern.err kernel: bcmsflash: found no supported devices
Jan  1 00:00:12 RT-N18U kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Jan  1 00:00:22 RT-N18U daemon.err process_monitor[1197]: cyclic NTP Update failed (servers time.hko.hk)
Jan  1 00:00:22 RT-N18U daemon.err process_monitor[1197]: Last update failed, we need to re-update after 30 seconds
Apr  3 04:37:23 RT-N18U daemon.err httpd[1005]: Request Error Code 404: File style/elegant/logo.png not found.


3. Warning(s) logged:
Code:
grep -i warn /var/log/messages | grep -v DROP

Jan  1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 0 domain 0
Jan  1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 0 domain 1
Jan  1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 1 domain 1
Jan  1 00:00:12 RT-N18U kern.warn kernel: Boot partition size = 524288(0x80000)
Jan  1 00:00:12 RT-N18U kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1e00000, 0x20000
Jan  1 00:00:12 RT-N18U kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan  1 00:00:12 RT-N18U kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan  1 00:00:12 RT-N18U kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Jan  1 00:00:12 RT-N18U kern.warn kernel:  2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Jan  1 00:00:12 RT-N18U kern.warn kernel: Available 7 bytes at (off,len):
Jan  1 00:00:12 RT-N18U kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Jan  1 00:00:12 RT-N18U kern.warn kernel: Bad eraseblock 356 at 0x000002c80000
Jan  1 00:00:12 RT-N18U kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Jan  1 00:00:12 RT-N18U kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan  1 00:00:12 RT-N18U kern.warn kernel: Disabling lock debugging due to kernel taint
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: passivemode set to 0x0
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: txworkq set to 0x0
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan  1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan  1 00:00:12 RT-N18U kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan  1 00:00:12 RT-N18U kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan  1 00:00:12 RT-N18U kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan  1 00:00:12 RT-N18U kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan  1 00:00:12 RT-N18U kern.warn kernel: eth0: mixed HW and IP checksum settings.


Firmware Size

From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
From 25427968 (b.37961) to 25804800 (b.38570) = 376832 bytes
From 25804800 (b.38570) to 27574272 (b.38840) = 1769472 bytes
From 27574272 (b.38840) to 27774976 (b.39031) = 200704 bytes
From 27774976 (b.39031) to 27779072 (b.39137) = 4096 bytes
From 27779072 (b.39137) to 27779072 (b.39144) = 0 bytes
From 27779072 (b.39144) to 28672000 (b.39267) = 892928 bytes
From 28672000 (b.39267) to 27926528 (b.39296) = -745472 bytes

Not re-posting User Comments & Old Problems.

Speedtest 2nd test:





speedtest.net result for DD-WRT BS build 39296 and Asus RT-N18U.jpg
 Description:
speedtest.net result for DD-WRT BS build 39296 and Asus RT-N18U
 Filesize:  8.57 KB
 Viewed:  1577 Time(s)

speedtest.net result for DD-WRT BS build 39296 and Asus RT-N18U.jpg



_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832


Last edited by mwchang on Wed Apr 03, 2019 5:05; edited 3 times in total
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum