Please report how it works for you:
Router Model: WNDR4300v1
Status: Partially working
Reset: No
Errors: 503 error when trying to view php files in lighttpd.
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4632 Mon Mar 11 03:03:09 CET 2019 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
none
Highly recommend you to revert to 36808M. It's the most recent, the fastest and most reliable version for WDR3600 _________________ TP-Link TL-WDR3600 v1
DD-WRT v3.0-r42366 std (02/14/20)
Linux 3.10.108-d10 #38381
100% cpu is back after two days. Arrived home and had 85% CPU. After a while, it went up to +100%. Not sure what is going one here.
what am i looking at? i see nearly 100% idle cpu
Load average: 1.31 1.04 0.92. And it's true, it seems not to be a cpu issue but a nic issue. on GUI those load averages where showing.
Well, not even a nic issue. i've gone back to r37736 and the stats are fairly similar, but the load average is more contained (and i don't know how they are calculated). Could it be just a visualization issue?
WNDR3700v4 r39144
I put in as main router...uptime 14:23
CPU load av is staying good as it used to be with this ol 560 MHz CPU .. nothing abnormal.
config exactly same as the EA8500
Clone WAN MAC
WAN DHCP
30 static leases
port forwarding
ovpn server (I only use 2048 bit keys on this where the EA8500 uses 4096
ath0 & ath1 good
guest network ... ath0.1, ath1.1, VLAN port 4 all via br1
haven't enabled unbound but he worked ok last time I checked
just using openNIC DNS servers that do DNSSEC
samba share ext4 (flash drive)
QOS...HFSC FQ_CODEL
http://www.dslreports.com/speedtest/47290352 http://www.dslreports.com/speedtest/47291006
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4632 Mon Mar 11 03:03:09 CET 2019 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
none
Highly recommend you to revert to 36808M. It's the most recent, the fastest and most reliable version for WDR3600
Joined: 04 Dec 2013 Posts: 91 Location: Râmnicu Vâlcea, România
Posted: Thu Mar 14, 2019 20:09 Post subject:
kroolas wrote:
Wildlion wrote:
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4632 Mon Mar 11 03:03:09 CET 2019 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
none
Highly recommend you to revert to 36808M. It's the most recent, the fastest and most reliable version for WDR3600
How do you know? Just because you said and that's why?
I have the same router, Tp-Link TL-WDR3600.
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4632 Mon Mar 11 03:03:09 CET 2019 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
none
Highly recommend you to revert to 36808M. It's the most recent, the fastest and most reliable version for WDR3600
How do you know? Just because you said and that's why?
I have the same router, Tp-Link TL-WDR3600.
100% cpu is back after two days. Arrived home and had 85% CPU. After a while, it went up to +100%. Not sure what is going one here.
what am i looking at? i see nearly 100% idle cpu
Load average: 1.31 1.04 0.92. And it's true, it seems not to be a cpu issue but a nic issue. on GUI those load averages where showing.
Well, not even a nic issue. i've gone back to r37736 and the stats are fairly similar, but the load average is more contained (and i don't know how they are calculated). Could it be just a visualization issue?
Out of curiosity what router are you using? I am using XR500 which is literally identical to the R7800 except with bigger flash. I was using a lot of recent builds and my CPU was constantly over 50% even at idle. After scratching my head i forgot that I had the CPU running in performance mode with startup code "for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n performance > $CPUFREQ; done" after I removed this and rebooted the router the CPU is now back to 0-1% at idle. Not sure if that assists but thought i'd mention it.
100% cpu is back after two days. Arrived home and had 85% CPU. After a while, it went up to +100%. Not sure what is going one here.
what am i looking at? i see nearly 100% idle cpu
Load average: 1.31 1.04 0.92. And it's true, it seems not to be a cpu issue but a nic issue. on GUI those load averages where showing.
Well, not even a nic issue. i've gone back to r37736 and the stats are fairly similar, but the load average is more contained (and i don't know how they are calculated). Could it be just a visualization issue?
Out of curiosity what router are you using? I am using XR500 which is literally identical to the R7800 except with bigger flash. I was using a lot of recent builds and my CPU was constantly over 50% even at idle. After scratching my head i forgot that I had the CPU running in performance mode with startup code "for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n performance > $CPUFREQ; done" after I removed this and rebooted the router the CPU is now back to 0-1% at idle. Not sure if that assists but thought i'd mention it.
