Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issue #4 below).
4.R6400v2 support added in r36811-36818, 36825, and 36826. R6700v3 support added in r36828-36840.
Issues, observations, and/or workarounds reported: 1. (egc) Policy-Based Routing broken if SFE enabled: 5900 quarkysg's PBR+SFE fix: 5986 2.Trendnet 81*DRU models are missing factory-to-flash 3.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 4.WDS does not work on ARM devices (only MIPS<->MIPS) 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
6.K2.6 builds are broken since 38253(?); GUI issues:6538 7.High CPU usage (on httpd?) occurring for some configurations:6555 Try `stopservice httpd` from ssh/telnet and report back. To flash another build, stop httpd and use CLI flash.
Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Linux 4.4.176 #5122 SMP Mon Mar 11 07:37:36 CET 2019 armv7l
Previous: r39137
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No issues so far.
Uptime: 25m
Temperatures: CPU 65.8 °C / WL0 49.5 °C / WL1 53.1 °C
Posted: Mon Mar 11, 2019 23:19 Post subject: Dlink Dir868L rev C
Router/Version: Dlink-DIR868L rev C
Firmware: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Version
Linux 4.4.176 #5122 SMP Mon Mar 11 07:37:36 CET 2019 armv7l
Previous: r39137
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No issues so far.
Uptime: 6h
Load Average 0.00, 0.01, 0.00
[b]Temperatures: CPU 77.5 °C / WL1 51.9 °C
access via https, no problems at all, cpu overload is not present via https.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Tue Mar 12, 2019 11:07 Post subject: Cisco Linksys E4200 v1
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-39144_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r39144M mega (03/11/19)
Kernel: Linux 3.10.108-d8 #23370 Mon Mar 11 13:54:56 CET 2019 mips
Previous: DD-WRT v3.0-r391037M mega (03/10/19)
Reset: No
Mode: Gateway/AP
Uptime: ~4 hrs
Status: OK
Issues/Errors:
No new errors, but my speculation is that system hardware and network services init order is broken, thus resulting in most of the problems on Broadcom. I don't think the syslog is that askew. Only way to truly test is to stop and restart wlconf, nas, dnsmasq, and ntpd IN THAT ORDER. Just my opinion.
Router Model: TP-Link Archer C9v1 (BCM4709 1GHz & BCM4360)
Firmware: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Linux 4.4.176 #5124 SMP Mon Mar 11 07:52:47 CET 2019 armv7l
Status: 2.4 and 5 GHz WAPs for Edgerouter X, 2.4 and 5GHz Guest VAPs, NAS(ext4), Samba, switch for PC; USB Print Server; using VAP workaround startup commands: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
Reset: No
Issues: NAS and VAPs do not work without work around startup command. _________________ Linksys EA8500
Linksys EA6350v3
Edgerouter X
Posted: Tue Mar 12, 2019 15:06 Post subject: Linksys EA6400
Router/Version: Linksys EA6400
File: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Linux 4.4.176 #5122 SMP Mon Mar 11 07:37:36 CET 2019 armv7l
Mode: Gateway/Router/Port Forwarding
Reset: No
Status: No issues so far.
Router/Version: WNDR4000 (x2 units)
File: DD-WRT v3.0-r39144M mega (03/11/19)
Kernel: Linux 3.10.108-d8 #23370 Mon Mar 11 13:54:56 CET 2019 mips
Mode: Access Point 2.4/5Ghz with VAP
Reset: No
Status: No issues so far.
Router/Version: Linksys WRT54g (version 2 and version 3)
File: dd-wrt.v24-39144_mini_wrt54g
Mode: Access point
Reset: No
Status: Killed them both. Flashing power light, never stops. Ports flash. Tried 30-30-30 resets to no avail. DMZ never lights up. Replaced one with a WNDR4000 above.
Last edited by scans on Tue Mar 12, 2019 23:16; edited 1 time in total
Posted: Tue Mar 12, 2019 23:16 Post subject: DIR-880L Rev A1
Router Name 880L DD-WRT
Router Model Dlink-DIR880L
Firmware Version DD-WRT v3.0-r39144 std (03/11/19)
Kernel VersionLinux 4.4.176 #5122 SMP Mon Mar 11 07:37:36 CET 2019 armv7l
Reset No
Flashed via GUI works fine CPU temps seem a little lower
CPU 83.6 °C / WL0 49.8 °C / WL1 48.5 °C
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Wed Mar 13, 2019 0:17 Post subject:
Router/Version: 2x Linksys E3000
File: dd-wrt.v24-39144_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-39031_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #23219 Sat Mar 2 14:56:33 CET 2019 mips
Mode: Both are client bridges and work great.
Status: No complaints this far :) _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r39144 std)
Kernel: Linux 4.4.176 #5122 SMP Mon Mar 11 07:37:36 CET 2019 armv7l
Status: Working
Reset: No
Notes on configuration:
Joined: 26 Mar 2013 Posts: 1857 Location: Hung Hom, Hong Kong
Posted: Wed Mar 13, 2019 3:04 Post subject: DD-WRT BS build 39144 and Asus RT-N18U
Router/Version:Asus RT-N18U(rev. A1)
Firmware: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Linux 4.4.176 #5126 Mon Mar 11 07:58:28 CET 2019 armv7l
Previous: DD-WRT v3.0-r39137 std (03/10/19)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (not 24/7 & not using IPv6, VAP, VPN, NAS nor USB)
Reset: NO reset during firmware upgrade
1. Only LAN 1 LED was working. RT-N18U has 4 LAN ports.
Unplugging cable did NOT turn off the LAN LED
WAN LED was off though internet was working.
2. Error(s) logged:
Code:
grep -i err /var/log/messages
Jan 1 00:00:12 RT-N18U kern.err kernel: bcmsflash: found no supported devices
Jan 1 00:00:21 RT-N18U daemon.err process_monitor[1188]: cyclic NTP Update failed (servers time.hko.hk)
Jan 1 00:00:21 RT-N18U daemon.err process_monitor[1188]: Last update failed, we need to re-update after 30 seconds
Mar 12 08:09:37 RT-N18U daemon.err httpd[996]: Request Error Code 404: File style/elegant/logo.png not found.
Mar 12 08:09:38 RT-N18U daemon.err httpd[996]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Mar 12 08:09:42 RT-N18U daemon.err httpd[996]: Request Error Code 404: File style/elegant/logo.png not found.
3. Warning(s) logged:
Code:
grep -i warn /var/log/messages | grep -v DROP
Jan 1 00:00:12 RT-N18U kern.warn kernel: Found a AMD NAND flash:
Jan 1 00:00:12 RT-N18U kern.warn kernel: Total size: 128MB
Jan 1 00:00:12 RT-N18U kern.warn kernel: Block size: 128KB
Jan 1 00:00:12 RT-N18U kern.warn kernel: Page Size: 2048B
Jan 1 00:00:12 RT-N18U kern.warn kernel: OOB Size: 64B
Jan 1 00:00:12 RT-N18U kern.warn kernel: Sector size: 512B
Jan 1 00:00:12 RT-N18U kern.warn kernel: Spare size: 16B
Jan 1 00:00:12 RT-N18U kern.warn kernel: ECC level: 8 (8-bit)
Jan 1 00:00:12 RT-N18U kern.warn kernel: Device ID: 0x 1 0xf1 0x 0 0x1d 0x 1 0xf1
Jan 1 00:00:12 RT-N18U kern.warn kernel: PCI: no core
Jan 1 00:00:12 RT-N18U kern.warn kernel: PCI: no core
Jan 1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 0 domain 0
Jan 1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 0 domain 1
Jan 1 00:00:12 RT-N18U kern.warn kernel: PCI: Fixing up bus 1 domain 1
Jan 1 00:00:12 RT-N18U kern.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 00:00:12 RT-N18U kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1e00000, 0x20000
Jan 1 00:00:12 RT-N18U kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 00:00:12 RT-N18U kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan 1 00:00:12 RT-N18U kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Jan 1 00:00:12 RT-N18U kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Jan 1 00:00:12 RT-N18U kern.warn kernel: Available 7 bytes at (off,len):
Jan 1 00:00:12 RT-N18U kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Jan 1 00:00:12 RT-N18U kern.warn kernel: Bad eraseblock 356 at 0x000002c80000
Jan 1 00:00:12 RT-N18U kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Jan 1 00:00:12 RT-N18U kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 00:00:12 RT-N18U kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 00:00:12 RT-N18U kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 00:00:12 RT-N18U kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan 1 00:00:12 RT-N18U kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 00:00:12 RT-N18U kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 00:00:12 RT-N18U kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:12 RT-N18U kern.warn kernel: eth0: mixed HW and IP checksum settings.
Firmware Size
From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
From 25427968 (b.37961) to 25804800 (b.38570) = 376832 bytes
From 25804800 (b.38570) to 27574272 (b.38840) = 1769472 bytes
From 27574272 (b.38840) to 27774976 (b.39031) = 200704 bytes
From 27774976 (b.39031) to 27779072 (b.39137) = 4096 bytes
From 27779072 (b.39137) to 27779072 (b.39144) = 0 bytes
User Comments:
- WiFi broken in k3.x editions since build 35531 for modes other than AP?
- Setting WPA re-key interval if not 99999 and rebooting router daily fixed nas (network authentication service) crash problems?
- Setting WPA re-key interval to 0 could prevent wifi clients from disconnecting?
- Change security mode of Virtual Interface wl0.1 to WPA personal, and after successfull connect change it back to WPA2 Personal.
- Manually install the kmod utilities package from the OpenWRT repository
- Anything but "auto" set in advanced wl1 settings for authentication type and are using WPA / WPA2, 5GHz NOT going to work
- VAP still not fixed by this build 36333, adding a VAP might disable the real AP
- 5GHz problem can be solved by adding delay (boot wait?) in init process?
- Restarting nas and all wireless interfaces (wl0, wl1) after seconds of delay could fix Guest WiFi & VAP issues?
Read: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=317617
Old Problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS (also something related to blank Source Net?)
e. The "Source Net" field in Port-Forwarding screen displayd blank field as "¸ÖÁv",
from builds 32667 to 32767. Possibly null-pointer assignment?
f. Blank Source Net in Port Forwarding crippled WAN in builds 35831-35874! Needed to be "0.0.0.0/0" or no internet!
g. Running "cat /proc/mtd" in Administration -> Commands for builds before 35916 didn't escape HTML special characters.
h. K3X BS Builds 36233 and 36242 might brick your routers (Kernel CPU patch went kaboom?). And VAP was not working. Bypass them!
i. lsmod listed only one module in some 36xxx builds and maybe some older builds
j. HTML special character "|" not escaped in build 37736 when using Admin. Command Shell
k. Bad but tested BS Builds for RT-N18U: 37305, 37405, 38581
speedtest.net result for DD-WRT BS build 39144 and Asus RT-N18U.png
Description:
speedtest.net result for DD-WRT BS build 39144 and Asus RT-N18U
Filesize:
13.34 KB
Viewed:
4590 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router Model: TP-Link Archer C9v1 (BCM4709 1GHz & BCM4360)
Firmware: DD-WRT v3.0-r39144 std (03/11/19)
Kernel: Linux 4.4.176 #5124 SMP Mon Mar 11 07:52:47 CET 2019 armv7l
Status: 2.4 and 5 GHz WAPs for Edgerouter X, 2.4 Guest VAP, NAS(ext4), Samba, switch for PC; USB Print Server; using VAP workaround startup commands: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
Reset: No
Issues: NAS and VAPs do not work without work around startup command.
Update: NAS does not work without manual "Apply Settings" after reboot. _________________ Linksys EA8500
Linksys EA6350v3
Edgerouter X
Last edited by eginnc on Thu Mar 14, 2019 10:21; edited 1 time in total
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Wed Mar 13, 2019 19:49 Post subject:
Router/Version: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r39144 mini (03/11/19)
Kernel: Linux 4.4.176 #5125 Mon Mar 11 07:56:37 CET 2019 armv7l
Mode: AC-Only Client Bridge, all settings not required are turned off.
Status: Seems to working fairly well, everything's up to speed and connectable.
Router/Version: Linksys E1200 v2
Firmware: dd-wrt.v24-39144_NEWD-2_K3.x_mega-e1200v2.bin
Previous: dd-wrt.v24-39031_NEWD-2_K3.x_mega-e1200v2.bin
Kernel: Linux 3.10.108-d8 #23370 Mon Mar 11 13:54:56 CET 2019 mips
Mode: Repeater for our guests to use.
Status: Very rarely used, but it connects and has connectivity to the web, though not tested much as it's just for guests. Lol _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
