Please report how it works for you:
Router Model:
Status:
Reset:
Errors:
WARNING: This thread is to report on flashing this experimental test build, providing important info
for both developers and users. Always state your hardware model, version, mode.
If you don't understand the risks or what to flash and how, with a means of recovery if it bricks,
DO NOT flash this experimental test build.
WNDR3700v4
DD-WRT v3.0-r39144 std (03/11/19)
Linux 3.18.136 #35654 Mon Mar 11 04:57:25 CET 2019 mips
No reset --- GUI install over r39137
switch / ovpn server / samba share ext4
all imma using worky ok
And his CPU Load Average 21%
0.21, 0.15, 0.10
and that's 'bout normal while I am connected to its ovpn
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4632 Mon Mar 11 03:03:09 CET 2019 mips
Status: working
Reset: No
Notes on configuration:
The 100% CPU issue in the last many builds seems to be two separate issues:
1. httpd was sometimes running full time, so top showed it 97+%. Possibly fixed in this build.
2. Even when httpd and all other processes are well behaved, like less than 1 or 2%, the "load" figures showed by top
and also by dd-wrt in the router status page show numbers like 1.13 and greater.
dd-wrt takes that to mean 100% load. They come from /proc/loadavg. There may be
some kernel issue there, since top is not showing any processes with a lot of usage and is not showing much usr, sys etc,
just 98+% idle. _________________ dd-wrt on TP-Link Archer A7 v5
Last edited by bvideo on Tue Mar 12, 2019 13:52; edited 1 time in total
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Tue Mar 12, 2019 6:04 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r39144 std (03/11/19)
Kernel Version Linux 3.18.136 #35628 Mon Mar 11 04:14:38 CET 2019 mips
update: CLI 39137 > 39144
reset: NO
status: Operational 2d 11h
errors: Nothing for my set up...
I do not have this 100% CPU issue
all good so far... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Mar 13, 2019 21:46; edited 1 time in total
Posted: Tue Mar 12, 2019 15:25 Post subject: Upgrade
All WebGUI upgrades. The rest have not been upgraded as they are not currently in use (seasonal use only).
Router/Version: TP-Link Archer C7 v2
Firmware: 39144
Previous: 39031
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-862L A1
Firmware: 39144
Previous: 39031
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3.
Router/Version: TP-Link 841ND v8
Firmware: 39144
Previous: 37860
Mode/Status: WDS Station, not active.
Reset: No
Issues/Errors: None, so far. No WPA3. Not tested, not currently in use.
Router/Version: TP-Link WDR3600 v1
Firmware: 39144
Previous: 37581
Mode/Status: WDS Station, not active.
Reset: No
Issues/Errors: None, so far. No WPA3. Not tested, not currently in use. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Last edited by ian5142 on Sat Mar 16, 2019 22:52; edited 1 time in total
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r39144 std (03/11/19)
Kernel Version Linux 3.18.136 #35616 Mon Mar 11 04:04:22 CET 2019 mips
Uptime 17:50
Load Average 0.08, 0.06, 0.01
Update via telnet from 39137
Status: working OK as AP, NG-mixed, HT40, QOS.
Problem: none
Good throughput and bufferbloat.
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4648 Mon Mar 11 03:24:05 CET 2019 mips
Status: Buggy on gui
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
3. Factory Defaults (reset) does not work (apparently broken after 33006)
4. Firmware restore button broken (apparently broken after 33006)
5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 ) [have not tested due to wanting isolation]
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r39144 std)
Kernel: Linux 3.10.108-d8 #4630 Mon Mar 11 02:52:12 CET 2019 mips
Status: Working
Reset: No
Notes on configuration:
Media Network
DNSMasq
Port Forwarding
DHCP reservation
Decided after a relatively long time to try an upgrade again. I had been hesitant due to the wifi issues. Well, they're still here. Wifi clients still can't connect.
(To refresh the memory: allegedly the issue is there if you have SSID broadcast off and use wifi MAC whitelist.)
