Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Tue Feb 26, 2019 21:04 Post subject:
tatsuya46 wrote:
Alozaros wrote:
try also TCP time 200 UDP 80 and open ports 32k..
tcp timeout of not even 5 minutes is asking for trouble, even less than 15 mins is aweful, 10 minutes bare minimum, 15 is safer.
well i ve no idea y you keep suggesting those values..
on overwhelmed unit they mean struggle and lots of open connections...first i read somewhere else its ok to have 300 /80 than i experimented and went down to 200 / 80 believe or not im fine with those values and never had any complains, i do have a lots of torrent users, users that play games, users that work with web applications, users that stream and use streaming, regular DL, LAN use other routers and switch + printers and other equpment all fine...
but if i use the standard values it gets quickly to choke....consider one of my clients loves to keep open web pages until 8 gig of ram goes down... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Sone of you guys are calling builds a success after 1 or 2 days of uptime. Is that really true?
I'm still on 38750. It's actually been really stable for the most part but once again, just like with 38500, I got to 11 days of uptime and the router froze up completely. Had to power it off and power it back on. _________________ Routing:.......Asus RT-AX88U (Asuswrt-Merlin 384.14) Switching:....Netgear GS608_V3 & GS605_V4, TrendNet TEG-S82G & TEG-S50G
Whenever I do a MAC address clone, the router doesn't get a new IP until I reboot the router. Is there any command that you can try to restart the service, like stopservice wland and startservice wland - I tried but it didn't work?
Anyone know of a similar command to restart the interfaces? _________________ Netgear R7800 [DD-WRT]; ASUS RT-87U [DD-WRT]; ASUS RT-AC68U [FreshTomato]
Whenever I do a MAC address clone, the router doesn't get a new IP until I reboot the router. Is there any command that you can try to restart the service, like stopservice wland and startservice wland - I tried but it didn't work?
Anyone know of a similar command to restart the interfaces?
If you are referring to WAN MAC clone then all you should have to do (provided the WAN MAC you choose is showing correctly on page .../Status_Router.asp
go to the page
.../Status_Internet.asp
DHCP 'Release' and then DHCP 'Renew' should work as long as ISP does not already have that MAC DHCP to something else.
I've been using WAN MAC clone for many many years on my main router (currently EA8500) .....or any unit I swap in as main.
The MAC my ISP holds static for me is actually the MAC from an old WRT54GSv2.
At times when I clear nvram and rebuild from scratch or setup a different unit for main router I'll forget to do the WAN MAC clone ...hence then no one can reach mrjcd.com ---- I also must remember that any nvram backup for any dd-wrt unit will never insert a WAN MAC clone.....although tomato firmware does it
###
oh yea, r38840M on the EA8500 just about 5 days (uptime 4 days, 23:51) and not neary a trouble
go to the page
.../Status_Internet.asp
DHCP 'Release' and then DHCP 'Renew' should work as long as ISP does not already have that MAC DHCP to something else.
Thanks and will try that next time. I use PC MAC sometimes to get a new IP if it's already cached by my ISP. _________________ Netgear R7800 [DD-WRT]; ASUS RT-87U [DD-WRT]; ASUS RT-AC68U [FreshTomato]
Router: Netgear R7800 (Wifi & VPN Router)
Firmware: DD-WRT v3.0-r38840M kongat (02/25/19) (from Netgear Firmware)
Kernel: Linux 4.9.159-rc1 #365 SMP Mon Feb 25 01:23:50 CET 2019 armv7l
Status: Working
Uptime: Over 8 hours
I updated my WiFi Router from a R7000 to a R7800 with similar configuration...
- 3x DNSCrypt-Proxy
- USB Storage - Scripts Only
- 7x VLANs/BRs
- WiFi 5x SSIDs (ath0,ath0.1,ath1,ath1.1,ath1.2)
- SSH / Telnet / SysLog
- 5x Cron Jobs
- ebtables
- OpenVPN-Client
Update: Received the 2nd R7800 and configured as AP & VPN2 Router. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router: Netgear R7800 (Gateway & VPN Router)
Firmware: DD-WRT v3.0-r38840M kongat (02/25/19) (from Netgear Firmware)
Kernel: Linux 4.9.159-rc1 #365 SMP Mon Feb 25 01:23:50 CET 2019 armv7l
Status: Working
Uptime: Over 10 hours
This R7800 was used as my WiFi with 2nd VPN Client that was setup to replace the R7000 WiFi and after 2 days it has work fine. I documented the configuration to be used on my 2nd R7800 which is on order. Temperately the R7000 Wifi Router is in use.
I now reconfigured the 1st R7800 to replace the R7000 Gateway & 1st VPN Client Router. Wifi on this Router is Disabled. I have configured the following services and it has been working for over 10 hours...
- ISP IPv6
- DDNS
- 7x VLANs/BRs
- SSH/SysLog/Telnet
- DNSMasq for all IPv4 & IPv6
- USB Storage - Bootstrap & Scripts
- 6x Cron Jobs
- 2x DNSCrypt-Proxy
- ip6tables
- OpenVPN-Client
- YAMon v3.4.7
- Ad-Blocking from Yamaraj
During the setup IPv6 wan't working and it was because Bootstrap didn't have a listing for "rdisc6" which is needed with my ISP to update the default gateway route. I took the "rdisk6" file from the R7000 (originally install with Bootstrap) and copied it the R7800's USB drive and IPv6 worked.
UPDATE: IGMP is broken.
-Enabling IGMP Snooping on br0 under Networking causes Bootloop.
-Enabling IGMP Snooping on switch0 breaks IPv6 _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531