Posted: Sun Feb 24, 2019 10:40 Post subject: Fxxxxxx
Router: WZR-HP-AG300H
Firmware now using: 01-21-2019-r38347
Reset: NO
Tried: wzr-hp-ag300h-dd-wrt-webupgrade-MULTI.bin
It can't update.
Updating cancel immediately.
This is same problem 02-19-2019-r38840
Log:
01-24-2019-r38381 language problem except for English
01-29-2019-r38507 NAT problem
01-31-2019-r38535 NAT problem
02-04-2019-r38570 NAT problem
02-06-2019-r38581 NAT problem
Actually 01-21-2019-r38347 is the last version for working well.
EA8500
The dd-wrt-webupgrade.bin is 42299392 bytes
WILL NOT INSTALL ON LINKSYS EA8500
###
WNDR3700 V4
DD-WRT v3.0-r38937 std (02/23/19)
Linux 3.18.136-rc1 #34011 Sat Feb 23 06:35:39 CET 2019 mips
switch / ovpn server / samba share Ext4
No reset -- GUI install over r38840
All on this unit is working ok
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r38937 std (02/23/19)
Kernel VersionLinux 3.18.136-rc1 #33973 Sat Feb 23 05:36:36 CET 2019 mips
Uptime 3:52
Update over Wifi via telnet/wget from r38840
Reset: No
Working OK as AP, HT40, QOS
Seems to work better than previous version. The 100% CPU problem didn't show up yet.
WNDR3700v4
This build too does not have a working Transmission -
Quote:
404: Not Found
Couldn't find Transmission's web interface files!
Users: to tell Transmission where to look, set the TRANSMISSION_WEB_HOME environment variable to the folder where the web interface's index.html is located.
Package Builders: to set a custom default at compile time, #define PACKAGE_DATA_DIR in libtransmission/platform.c or tweak tr_getClutchDir () by hand.
Reverting back to r38581.
mrjcd wrote:
WNDR3700 V4
I was seeking help with "Wifi does not connect if SSID broadcast is disabled and MAC filter is enabled to allow only listed clients." that I have been facing since r36698, mate. I know you use your routers as switches, so no worries - but would you know what I should do (turn on syslogd and capture a log, etc.) to help BS (or other devs) fix this?
I was seeking help with "Wifi does not connect if SSID broadcast is disabled and MAC filter is enabled to allow only listed clients." that I have been facing since r36698, mate. I know you use your routers as switches, so no worries - but would you know what I should do (turn on syslogd and capture a log, etc.) to help BS (or other devs) fix this?
Most likely the only way BS will fix such a thing is if enough of DD-WRT REAL customers complained.
I would suggest to stick with build that works for you. If you want to play with 'New Builds' you are better off getting another router
Only devices I use SSID broadcast disabled plus only permitted MAC allowed is on two E2100L routers that do a LAN-LAN (my main network) WDS link to each other.
AP & station also have 56 character password I generated few years ago. Also use CH 13 lower HT40. Been using for years --- WDS link is broadcast over a US highway and across small town I live. Never ever had anyone get in it.
The E2100L routers are using r27506 (07/09/15) because it is the only consistant WDS stable build I have ever found for them.
And
All my old broadcom routers (5 that are used 24/7) are on r35531 [03/26/18]
Newer DD-WRT firmware does NOT mean it is better .... it has never meant that --- of course it all depends on your router and what you are doing with it
Posted: Sun Feb 24, 2019 18:34 Post subject: Re: Fxxxxxx
shure wrote:
Router: WZR-HP-AG300H
Firmware now using: 01-21-2019-r38347
Reset: NO
Tried: wzr-hp-ag300h-dd-wrt-webupgrade-MULTI.bin
It can't update.
Updating cancel immediately.
This is same problem 02-19-2019-r38840
Log:
01-24-2019-r38381 language problem except for English
01-29-2019-r38507 NAT problem
01-31-2019-r38535 NAT problem
02-04-2019-r38570 NAT problem
02-06-2019-r38581 NAT problem
Actually 01-21-2019-r38347 is the last version for working well.
If your DMZ Port Forwarding Port Triggering does not work. Reset the router to default settings. Something changed on how the Nvram makes those settings work. The DMZ and port forwarding was totally broken for me until I reset to default settings.
Router Model: DIR-615 i1
Status: Buggy
Reset: Erased NVRAM
Errors: GUI froze up when enabling wireless encryption settings; router became unresponsive after 24 hours. GUI also lagged a lot following flash. Flashed back to r38840 where GUI is snappy.
Last edited by teslacoil on Mon Feb 25, 2019 16:13; edited 4 times in total