Joined: 16 Nov 2015 Posts: 6388 Location: UK, London, just across the river..
Posted: Mon Jan 28, 2019 8:05 Post subject:
msoengineer its quite confusing to who your post
is directed to...but i can confidently say in regards
of 1043 v3 that it doesn't have QAM 256 as well
i do have v2 witch shares the same hardware and i experienced the same Wi-Fi issues on it, consider the last BS build... had to revert to a 38326 and its fine...
I do know my Wi-Fi setting very very well....indeed... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 21 Jan 2017 Posts: 1782 Location: Illinois Moderator
Posted: Mon Jan 28, 2019 18:00 Post subject:
Alozaros wrote:
msoengineer its quite confusing to who your post
is directed to...but i can confidently say in regards
of 1043 v3 that it doesn't have QAM 256 as well
i do have v2 witch shares the same hardware and i experienced the same Wi-Fi issues on it, consider the last BS build... had to revert to a 38326 and its fine...
I do know my Wi-Fi setting very very well....indeed...
@Alozaros-Well I guess I could have been very very specific and said @commodore, but I though by having his quote it would be clear...ASS U ME.....I was trying to help others out too, who actually read stuff to learn about why they can't seen to get 800Mbps@2.4ghz speeds on their devices...Horse and water I guess...just drown the animal...
So @Commodore....looks like others are having your issues too....Revert back to 38326 _________________ FORUM RULES
Posted: Tue Jan 29, 2019 13:59 Post subject: TL-WR1043N v1 not working since build 36104
Router / Version: TL-WR1043ND V1
Firmware: 38381
Previous: 36104
Reset: yes
Problems / Errors: I had some 2017/04 build before that had some issue with upgrading so i bought a USB to TTL converter and tried this 38381 build and was so confused on why it wasn't working.
Posted: Tue Jan 29, 2019 18:33 Post subject: Re: Hi
pedrohsk1 wrote:
Router Model: TP Link WR841Nv9
Status: So far, it's running fine. I'll do more tests. The SQM / FQ_CODEL function is better than the stable version (28-10-10 / 2018). That was one of the reasons I used this trial version. If the DD-WRT team achieved a SQM / FQ_CODEL performance equal to the LEDE 17.05 / 18.06 it would really be a GREAT achievement. But it's good.
Reset: No.
Errors: No. Until now. I feel that the internet has been a bit slower. But it is acceptable.
sorry the bad english. I'M brazilian.
One note: HSFC is better than HTB here in my setup. Modem bridge + Router with DD-WRT + Router AP WIFI.
HSFC was EXTREMELY superior to HTB, HTB gives several 'SPIKES' in connection latency for no reason at all. with HSFC this does not occur, the connection becomes very stable. I achieved performance equal to / greater than LEDE 17.05.
msoengineer its quite confusing to who your post
is directed to...but i can confidently say in regards
of 1043 v3 that it doesn't have QAM 256 as well
i do have v2 witch shares the same hardware and i experienced the same Wi-Fi issues on it, consider the last BS build... had to revert to a 38326 and its fine...
I do know my Wi-Fi setting very very well....indeed...
@Alozaros-Well I guess I could have been very very specific and said @commodore, but I though by having his quote it would be clear...ASS U ME.....I was trying to help others out too, who actually read stuff to learn about why they can't seen to get 800Mbps@2.4ghz speeds on their devices...Horse and water I guess...just drown the animal...
So @Commodore....looks like others are having your issues too....Revert back to 38326
Hmm, not sure if this makes sense - lack of QAM256 (didn't find any related setting) makes wifi "disappear" if I'm using whitelist and no-broadcast SSID? As for HT40, I'm away iOS devices don't support it, but some others did, though.
Well, I put 38326 on the router, but there was no wifi as well, so I'm back at 37736...
As for HT40, I'm away iOS devices don't support it, but some others did
The only clients I have that will take HT40 are a new Xiaomi Mi Pad 4 with ??? wifi chipset (likely QCA) I get 400Mbps connection rates (qam256), and my intel chipsets on laptops (3160=150Mbps,7260=300Mbps, 8260=300Mbps). All other Android devices get HT20 to "play nice" in the 2.4ghz spectrum with neighbors wifi. _________________ FORUM RULES
Status: not fully compatible
Reset: no
Errors: mariadb entware doesn't work. sftpd still doesn't work. rolled back to 12/12/2018 so that I could get mariadb working again.