Posted: Tue Jan 29, 2019 21:20 Post subject: New Build: R38507 (1-29-2019)
Firmware Version
DD-WRT v3.0-r38507 std (01/29/19)
Kernel Version
Linux 4.9.153 #766 SMP Tue Jan 29 02:29:23 CET 2019 armv7l _________________ WRT1900ACSv2
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.
Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.
Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.
Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2020 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Joined: 30 May 2017 Posts: 529 Location: Rural Manitoba
Posted: Fri Feb 01, 2019 2:21 Post subject:
PIZZEDMEOFF wrote:
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.
Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.
Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.
Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that.
Good to hear that you are up and running. I have yet to move up to r38507 since I am not having any problems, but I may do so this weekend. As I said before don't hestitate to ask here on the forum. There is a wealth of information available.
Best of luck with your surfing! _________________ WRT3200acm Master WDS 5GHz 80Mhz CH 36 (+6) r44048
Ath1 2.4Ghz Disabled
99 Static Leases
WRT3200acm r44048 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r44048 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r44048
2.4Ghz AP Ch1 HT20 Mixed
(SPARE)WRT1900AC V1 r44048 On LAN
5Ghz WDS AP Ch149(+6) 80Mghz
2.4Ghz Ch 6 20Mhz N/G Mixed
WRT1200AC V1 r44048 LAN
2.4Ghz 20Mhz Ch 6 Mixed
5 Ghz 80Mhz Ch 149 (UUU+6) WDS AP
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use