New Build: R38507 (1-29-2019)

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Tue Jan 29, 2019 21:20    Post subject: New Build: R38507 (1-29-2019) Reply with quote
Firmware Version
DD-WRT v3.0-r38507 std (01/29/19)
Kernel Version
Linux 4.9.153 #766 SMP Tue Jan 29 02:29:23 CET 2019 armv7l

_________________
WRT1900ACSv2
Sponsor
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Wed Jan 30, 2019 0:33    Post subject: DD-WRT v3.0-r38507 std (01/29/19) Reply with quote
WRT3200ACM V1 r38507 Firefox 64.0.2 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
pbphoto
DD-WRT User


Joined: 29 Oct 2017
Posts: 258

PostPosted: Wed Jan 30, 2019 0:55    Post subject: Reply with quote
Upgraded from 38381 (which had been running fine for ~3 days) via the GUI with Safari. No issues so far. Performance is excellent.

Linksys WRT3200ACM: gateway mode, DNSMasq for DNS and DHCP, OpenVPN client (Mullvad), Firewall enabled, QoS enabled, PBR enabled (SFE disabled). WIFI: 2.4ghz: G-only, 20mhz channel width, channel 1, WPA2-CCMP-128. 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.

Linksys WRT1900ACS: router mode, hardwired ethernet lan to WRT3200ACM above. WIFI: 2.4ghz: G-only, 20mhz channel width, channel 6, WPA2-CCMP-128. 5ghz: AC/N mixed, 80mhz channel width, channel 52+6, WPA2-CCMP-128.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Thu Jan 31, 2019 0:04    Post subject: Reply with quote
Upgraded with no issues. All working well. Performance normal.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Fri Feb 01, 2019 1:29    Post subject: Reply with quote
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.

Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.

Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.

Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 582
Location: Rural Manitoba

PostPosted: Fri Feb 01, 2019 2:21    Post subject: Reply with quote
PIZZEDMEOFF wrote:
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.

Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.

Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.

Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that.


Good to hear that you are up and running. I have yet to move up to r38507 since I am not having any problems, but I may do so this weekend. As I said before don't hestitate to ask here on the forum. There is a wealth of information available.
Best of luck with your surfing!

_________________
Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55460
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN

WRT3200acm r55460 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r55460 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1900ACS -> WDS 5Ghz -> 1900 V1
3200 Master -> WDS -> 3200 Slave & 1900V1
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 582
Location: Rural Manitoba

PostPosted: Fri Feb 01, 2019 16:10    Post subject: r38507 Reply with quote
Upgraded from r38381 -> r38507

MS Edge LAN connect to 3200 -
MS Edge WiFi WDS to 3200
MS Edge WiFi WDS to 1900 V1

Had to reboot Master to re-establish PPoE Internet. Same as previous builds

Sonoff (ESP8266) still won't connect to 3200 with wmm enabled.

Disabled Telenet as continuous attempted access "Unknown" on PTS0

Otherwise all devices working as before.

_________________
Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55460
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN

WRT3200acm r55460 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r55460 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1900ACS -> WDS 5Ghz -> 1900 V1
3200 Master -> WDS -> 3200 Slave & 1900V1
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum