New BS Build: 01-24-2019-r38381

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
pinote
DD-WRT Novice


Joined: 27 Jan 2019
Posts: 3

PostPosted: Sun Jan 27, 2019 18:17    Post subject: Reply with quote
Router/Version: Archer C9 V2
Firmware: r38381
Kernel: Linux 4.4.171 #4509 SMP Thu Jan 24 15:40:24 CET 2019 armv7l
Mode/Status: Gateway / working
Reset: no
Issues/Errors:
1 - Overclocking Frequency function can be change on Adminstration Tab, but the value is not set on Status page.

Uptime: 13h16m
CPU 70.2 °C / WL0 49.0 °C / WL1 48.5 °C
Sponsor
rweier
DD-WRT Novice


Joined: 09 Aug 2018
Posts: 13

PostPosted: Sun Jan 27, 2019 21:34    Post subject: Reply with quote
Router Model: ASUS RT-N16
Firmware: DD-WRT v3.0-r38381M big (01/24/19)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/01-24-2019-r38381/broadcom_K3X/dd-wrt.v24-38381_NEWD-2_K3.x-big-RT-N16.trx
Previous: DD-WRT v3.0-r38159 big (01/02/19)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/01-02-2019-r38159/broadcom_K3X/dd-wrt.v24-38159_NEWD-2_K3.x-big-RT-N16.trx
Kernel: Linux 3.10.108-d8 #22701 Thu Jan 24 23:04:16 CET 2019 mips
Status: Wired Access Points, Wireless NG Mixed. 1 RT-N16 Gateway host + 2 RT-N16 Router clients
Reset: No
Errors: None so far, up 1 days
M95D
DD-WRT Novice


Joined: 26 Jan 2019
Posts: 7

PostPosted: Mon Jan 28, 2019 10:34    Post subject: Reply with quote
bushant wrote:
M95D wrote:
[#3:
Adding static DHCP leases doesn't work. After saving/applying the settings, the page shows empty fields. Trying to add leases again leads to a duplicate error.

Try this for static leases:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316051&highlight=static+leases

I already added the leases using dnsmasq options. I was just reporting a bug.

#5 problem:
It seems that wireless freezes randomly when there is high load. When it freezes, beacons continue to be sent, but the router does not respond to ping, DHCP, etc. and does not forward packets to/from ethernet. The rest of the router works normally: ethernet ping, routing, SSH, web interface. A wireless disable/enable or settings change is required to make it work again. Changing wireless settings have no effect. Freezes occur even after limiting the wireless mode to BG-only.
Changing TCP Congestion to Reno solved the problem! I have now 48h uptime with no wireless freezes.
Conclusion: There must be something wrong with the default congestion control scheme (westwood).
parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 98

PostPosted: Mon Jan 28, 2019 10:57    Post subject: Reply with quote
M95D wrote:
bushant wrote:
M95D wrote:
[#3:
Adding static DHCP leases doesn't work. After saving/applying the settings, the page shows empty fields. Trying to add leases again leads to a duplicate error.

Try this for static leases:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316051&highlight=static+leases

I already added the leases using dnsmasq options. I was just reporting a bug.

#5 problem:
It seems that wireless freezes randomly when there is high load. When it freezes, beacons continue to be sent, but the router does not respond to ping, DHCP, etc. and does not forward packets to/from ethernet. The rest of the router works normally: ethernet ping, routing, SSH, web interface. A wireless disable/enable or settings change is required to make it work again. Changing wireless settings have no effect. Freezes occur even after limiting the wireless mode to BG-only.
Changing TCP Congestion to Reno solved the problem! I have now 48h uptime with no wireless freezes.
Conclusion: There must be something wrong with the default congestion control scheme (westwood).


I absolutely agree about the problem #5 with my Linksys EA2700
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Jan 28, 2019 15:57    Post subject: Reply with quote
@M95D, on #4, is that via ssh/telnet or webUI command interface? I don't think I've ever noticed this problem in the past....
M95D
DD-WRT Novice


Joined: 26 Jan 2019
Posts: 7

PostPosted: Mon Jan 28, 2019 17:05    Post subject: Reply with quote
kernel-panic69 wrote:
@M95D, on #4, is that via ssh/telnet or webUI command interface? I don't think I've ever noticed this problem in the past....

SSH immediately after reboot, dmesg from command prompt. The first messages are from PCI devices. The top is missing.


Last edited by M95D on Mon Jan 28, 2019 17:10; edited 1 time in total
M95D
DD-WRT Novice


Joined: 26 Jan 2019
Posts: 7

PostPosted: Mon Jan 28, 2019 17:09    Post subject: Reply with quote
parco wrote:

I absolutely agree about the problem #5 with my Linksys EA2700

Is it stable with Reno?
sonicxx
DD-WRT Novice


Joined: 31 May 2014
Posts: 4

PostPosted: Tue Jan 29, 2019 17:23    Post subject: Error after upgrading Reply with quote
Router/Version: Linksys E900
File: dd-wrt.v24-38381_NEWD-2_K2.6_mini-e900
Kernel:
Mode: AP

After the upgrade, cant access webgui on any browser, telnet says port 23 connection fail and tftp2 cant revert the firmware, im stucked!

Internet works fine
Wifi is ddwrt open network and working
Pinging router is fine
This router dont have USB port =(

Even tried to open webgui from wifi, wont work

Need some help!
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Tue Jan 29, 2019 17:49    Post subject: Re: Error after upgrading Reply with quote
sonicxx wrote:
Router/Version: Linksys E900
File: dd-wrt.v24-38381_NEWD-2_K2.6_mini-e900
Kernel:
Mode: AP

After the upgrade, cant access webgui on any browser, telnet says port 23 connection fail and tftp2 cant revert the firmware, im stucked!
You need to TFTP; use the OEM firmware, if DD-WRT won't load. As kernel-panic69 noted in another thread, recent k2.6 builds are broken*. You'll either need an older build, or just use the k3x build (recommended). https://svn.dd-wrt.com/ticket/6538
Also see the wiki if you haven't already: https://wiki.dd-wrt.com/wiki/index.php/Linksys_E900

*And from the first page:
flood404 wrote:
Router/Version: 320N linksys [...]
Kernel: k2.6 [...]
Status: Unusable WEBGUI Fails to load. It does boot though. Tried Firefox and Chrome to access Webgui.

Do not expect to configure it once you load 38381 into this one. This may effect other broadcom routers.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
sonicxx
DD-WRT Novice


Joined: 31 May 2014
Posts: 4

PostPosted: Tue Jan 29, 2019 21:12    Post subject: Re: Error after upgrading Reply with quote
jwh7 wrote:
sonicxx wrote:
Router/Version: Linksys E900
File: dd-wrt.v24-38381_NEWD-2_K2.6_mini-e900
Kernel:
Mode: AP

After the upgrade, cant access webgui on any browser, telnet says port 23 connection fail and tftp2 cant revert the firmware, im stucked!
You need to TFTP; use the OEM firmware, if DD-WRT won't load. As kernel-panic69 noted in another thread, recent k2.6 builds are broken*. You'll either need an older build, or just use the k3x build (recommended). https://svn.dd-wrt.com/ticket/6538
Also see the wiki if you haven't already: https://wiki.dd-wrt.com/wiki/index.php/Linksys_E900

*And from the first page:
flood404 wrote:
Router/Version: 320N linksys [...]
Kernel: k2.6 [...]
Status: Unusable WEBGUI Fails to load. It does boot though. Tried Firefox and Chrome to access Webgui.

Do not expect to configure it once you load 38381 into this one. This may effect other broadcom routers.


There was a trick to tftp it, done and now working with ur tip! Thx!


Last edited by sonicxx on Tue Jan 29, 2019 21:28; edited 1 time in total
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Tue Jan 29, 2019 21:22    Post subject: Re: Error after upgrading Reply with quote
sonicxx wrote:
I did, and tftp2.exe says "unable to get responses from the server", any other method?
Please start a new thread, and provide the TFTP steps you went through, static IP, etc. You'll only get a response in the first second or two.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 98

PostPosted: Mon Feb 04, 2019 8:46    Post subject: Reply with quote
M95D wrote:
parco wrote:

I absolutely agree about the problem #5 with my Linksys EA2700

Is it stable with Reno?

not tried yet, but I thought would it be a problem of thread locking if DD-WRT linux in Linksys Broadcom is a multi-thread OS like x86......
parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 98

PostPosted: Tue Feb 05, 2019 9:34    Post subject: Reply with quote
M95D wrote:
parco wrote:

I absolutely agree about the problem #5 with my Linksys EA2700

Is it stable with Reno?

Just tried the Reno yesterday but no lucks, the connection hang problems are still existed, so there should not be only the problems of congestion control or westwood for my Linksys EA2700... Crying or Very sad
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum