Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Jan 18, 2019 23:10 Post subject:
msoengineer wrote:
jerrytouille wrote:
^what tatsuya said + mb8600 docsis 3.1 has built-in pie qos that may interfere
I believe the ISP has to have it enabled in the modem firmware; and judging by the results, I don't think Comcast does.
There's no way for the user to enable/disable it in the modem settings.
pie on the isp should not do that, and if its docsis 3.1 pie is mandatory, if its docsis 3.0 its optional, my isp chose to use pie on 3.0 thats why i get +45ms on both down and upload with qos off. and not +110/+350ms like a few years ago. sure +45ms is good for an isp and generic customers, but not a proper working qos gets much less than that. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
EA8500
DD-WRT v3.0-r38326 std (01/18/19)
Linux 4.9.151 #247 SMP Fri Jan 18 00:46:03 CET 2019 armv7l
No reset -- GUI install over r38302
switch / ovpn server / samba share
all working
###
WNDR3700v4
DD-WRT v3.0-r38326 std (01/18/19)
Linux 3.18.132 #30656 Fri Jan 18 05:05:19 CET 2019 mips
No reset -- GUI install over r38302
switch / ovpn server / samba share Ext4
all working
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r38326 std (01/18/19)
Kernel Version Linux 3.18.132 #30618 Fri Jan 18 03:59:36 CET 2019 mips
Update via LAN/GUI from r38302
Reset: Yes
Status: Working OK as AP, HT40, QOS
I run the MB8600 with a R9000 QOS off and always get an A in bufferbloat. Cox Gigablast service.
https://www.dslreports.com/speedtest/44845629 _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
grades mean nothing look at the numbers instead, their grading logic is crap. its a decent result but that upload is concerning, and high res bufferbloat needs to be on in settings. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router: Netgear R7800
Firmware: DD-WRT v3.0-r38326 std (01/18/19)
Kernel: Linux 4.9.151 #247 SMP Fri Jan 18 00:46:03 CET 2019 armv7l
Status: Working
Reset: No
Previous: 38253
Errors: No
Temperatures : CPU 45.144 °C / ath0 21 °C / ath1 21 °C
Working very well :
Router mode : DHCP
SFE Enable STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
ath0, ath1
Vpn (OpenVPN Client)
grades mean nothing look at the numbers instead, their grading logic is crap. its a decent result but that upload is concerning, and high res bufferbloat needs to be on in settings.
Upload is capped at 35 max so I don't worry about it. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Mon Jan 21, 2019 14:58 Post subject:
Something is wonky with the last two BS releases 38302 [rescinded] & 38326 with regards to Multicast. Last good working was 38253
My Silicondust HD Homerun Prime tv cable card tuner stops getting recognized by android devices and won't fully load the stream/channels from the HD Homerun. The HD Homerun app hangs at the initialization screen and never streams the channel like it used to. Sometimes it will recognize the Prime, but then won't stream the TV channel and just shows a black screen.
I performed a full router reset and re-did all the settings and it worked again for about 24hrs; I have the router reboot daily at 3AM to kill any gremlins, but this time around it seems the gremlins stuck around post reboot and UPnP multicast isn't quite working right. I rebooted the Prime, too, just in case and still no dice.
Anyone else having issues seeing their iOS devices/bonjour on build 38326?
P.S. the multicast_to_unicast=1 "fix" doesn't fix the issue either like it did in the past. Something else seems to be stopping the stream. Maybe BS did some behind the scenes firewall stuff? SVN 38293? _________________ FORUM RULES
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Mon Jan 21, 2019 15:09 Post subject:
msoengineer wrote:
Something is wonky with the last two BS releases 38302 [rescinded] & 38326 with regards to Multicast. Last good working was 38253
My Silicondust HD Homerun Prime tv cable card tuner stops getting recognized by android devices and won't fully load the stream/channels from the HD Homerun. The HD Homerun app hangs at the initialization screen and never streams the channel like it used to. Sometimes it will recognize the Prime, but then won't stream the TV channel and just shows a black screen.
I performed a full router reset and re-did all the settings and it worked again for about 24hrs; I have the router reboot daily at 3AM to kill any gremlins, but this time around it seems the gremlins stuck around post reboot and UPnP multicast isn't quite working right. I rebooted the Prime, too, just in case and still no dice.
Anyone else having issues seeing their iOS devices/bonjour on build 38326?
P.S. the multicast_to_unicast=1 "fix" doesn't fix the issue either like it did in the past. Something else seems to be stopping the stream. Maybe BS did some behind the scenes firewall stuff? [url=https://svn.dd-wrt.com/changeset/38293]SVN 38293?[/ur
try with firewall off, devices have their own firewalls anyway _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r38326 std)
Kernel: Linux 3.10.108-d8 #56 Fri Jan 18 03:07:06 CET 2019 mips
Status: Buggy on gui
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
3. Factory Defaults (reset) does not work (apparently broken after 33006)
4. Firmware restore button broken (apparently broken after 33006)
5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 ) [have not tested due to wanting isolation]
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r38326 std)
Kernel: Linux 3.10.108-d8 #38 Fri Jan 18 02:29:09 CET 2019 mips
Status: Working
Reset: No
Notes on configuration:
Media Network
DNSMasq
Port Forwarding
DHCP reservation
Router/Version: TP-Link Archer C7 v2
Firmware: 38326
Previous: Stock 1.50
Mode/Status: Gateway home router
Reset: 30/30/30 then straight to current 38326.
Issues/Errors: None so far. Works as expected for basic gateway home router with no particular addons yet. Wifi security worked correctly with WPA2 and AES encryption selected from list (unlike prior versions disabling radio).
Router/Version: TP-Link Archer C7 v2
Firmware: 38326
Previous: Stock 1.80
Mode/Status: secondary AP, switch, and DHCP forwarder to Gateway
Reset: 30/30/30 then straight to current 38326
Issues/Errors: None so far. 3rd device in a chain to extend wireless coverage from gateway->mikrotik gigabit switch->this unit as AP+switch. The install was slightly different with stock 1.80 firmware vs 1.50 stock, but in both cases, went straight from stock to 38326, not an older version.
I have a 100/10 package with Spectrum for interwebs. Here's a speedtest with default settings.
[/img] _________________ Testing 2x TP-Link Archer C7 v2 with 38326
Netgear WNR3500 v2/U/L v1 v3.0-r29519 big (04/25/16)
OLD units: Belkin F5D8235-4v3 [29816 mega - AP, ethernet switch & DHCP Forwarder]
Netgear WNR2000v3 [29837 testing] Netgear WNR2000v2 [29621 mini testing] TP-Link TL-WR841NDv9 [29816 std -primary router]
WAP54Gv3.1 [30082 micro -AP & DHCP Forwarder] WRT54Gv6 [30082 micro - testing] WRT54Gv8 [30082 micro - AP & DHCP Forwarder] WRT54GSv1 [29816 mega generic - AP, ethernet switch & DHCP Forwarder]
