New Build: r38302 01-14-19

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 240
Location: FL

PostPosted: Tue Jan 15, 2019 15:09    Post subject: New Build: r38302 01-14-19 Reply with quote
ftp://ftp.dd-wrt.com/betas/2019/01-14-2019-r38302/
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2020
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Sponsor
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 339
Location: South Carolina

PostPosted: Tue Jan 15, 2019 21:01    Post subject: WRT3200ACM v1 r38302 FAILS to flash Reply with quote
WRT3200ACM V1 r38302 Firefox 64.0 (64-bit) webflash

Unable to flash my router with this release. Cold boot, attempt re-flash fails.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 335

PostPosted: Tue Jan 15, 2019 22:41    Post subject: Reply with quote
Flashed factory-to-ddwrt.bin from Linksys Partition using Firefox 64.02.
Restored settings from R38253. Up and running. No anomolies.

Firmware Version
DD-WRT v3.0-r38302 std (01/14/19)
Kernel Version
Linux 4.9.150 #721 SMP Mon Jan 14 11:01:08 CET 2019 armv7l

_________________
WRT1900ACSv2
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 384

PostPosted: Tue Jan 15, 2019 23:22    Post subject: Reply with quote
Cannot flash. Getting "Upgrade failed.". I am returned to my 1/10/2019 build without harm.
_________________
Netgear R9000 X10
DD-WRT v3.0-r46329 std (04/13/21)
Gateway, AP, DNSMasq
IPv4 & IPv6 (Prefix Delegation)
CloudFlare, Ignore WAN DNS
QoS: HFSC w/CAKERST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0(Auto)
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0(Auto)
Clock 2000MHz
Xfinity 1.2Gbps/42Mbps
Seahawk
DD-WRT Novice


Joined: 07 Jun 2017
Posts: 7

PostPosted: Wed Jan 16, 2019 0:44    Post subject: New Build: r38302 01-14-19 Reply with quote
MLandi wrote:
Cannot flash. Getting "Upgrade failed.". I am returned to my 1/10/2019 build without harm.



Based on the previous comments it seems the WRT3200 is having issue's with this release. Anyone try it on a WRT32x?
ddkt
DD-WRT Novice


Joined: 17 Mar 2016
Posts: 41

PostPosted: Wed Jan 16, 2019 9:44    Post subject: Reply with quote
Upgrade Failed here too on a WRT1900ACS v1.
apvm
DD-WRT User


Joined: 13 May 2012
Posts: 156

PostPosted: Wed Jan 16, 2019 13:05    Post subject: Reply with quote
WRT1900AC v2, used the ubootenv trick to upgrade from r38253 without resetting settings. Success.

Update: lost 5Ghz connection, revert back to r38253, reset settings and upload config file but still no 5Ghz.

May have to reflash and reconfig in order to get 5ghz working again.

Right now went back to Lede.


Last edited by apvm on Wed Jan 16, 2019 15:20; edited 1 time in total
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 240
Location: FL

PostPosted: Wed Jan 16, 2019 13:49    Post subject: Reply with quote
ok i tried this on mine i think it was 9 hours stable before the wireless freeze thing happened, Reverted back its getting better though.
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2020
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
dwnl
DD-WRT Novice


Joined: 18 Sep 2011
Posts: 16

PostPosted: Wed Jan 16, 2019 16:34    Post subject: Reply with quote
Same here on 3200acm - "upgrade failed" but no hard done otherwise.
I checked with different browsers and devices to make sure it's not related to something else, but no dice.

_________________
Linksys WRT3200ACM
Yemble
DD-WRT Guru


Joined: 17 Feb 2010
Posts: 613
Location: Yorkshire (GOC)

PostPosted: Wed Jan 16, 2019 18:49    Post subject: Reply with quote
It's happening on Broadcom routers as well...

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318267

_________________
Linksys WRT32X v1 - r45677
Linksys WRT1900AC v1 - r45677
TP-Link Archer C9 v1 - r45677
Firmware: ftp://ftp.dd-wrt.com/betas/2021/
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 530
Location: Rural Manitoba

PostPosted: Thu Jan 17, 2019 2:35    Post subject: Build r38308 Reply with quote
Obviously lots of problems with this build. Has been removed from the Beta site.
_________________
WRT3200acm Master WDS 5GHz 80Mhz CH 36 (+6) r44048
Ath1 2.4Ghz Disabled
99 Static Leases

WRT3200acm r44048 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r44048 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r44048
2.4Ghz AP Ch1 HT20 Mixed

(SPARE)WRT1900AC V1 r44048 On LAN
5Ghz WDS AP Ch149(+6) 80Mghz
2.4Ghz Ch 6 20Mhz N/G Mixed

WRT1200AC V1 r44048 LAN
2.4Ghz 20Mhz Ch 6 Mixed
5 Ghz 80Mhz Ch 149 (UUU+6) WDS AP

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1200 V1 -> WDS 5Ghz -> 1900 V1 & 1900V1
3200 Master -> WDS -> 3200 Slave
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8376
Location: Texas, USA

PostPosted: Thu Jan 17, 2019 7:43    Post subject: Re: Build r38308 Reply with quote
WENED wrote:
Obviously lots of problems with this build. Has been removed from the Beta site.


Yep. https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1153601#1153601
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 335

PostPosted: Thu Jan 17, 2019 20:41    Post subject: Reply with quote
Must have been a model specific incompatiblity...
I've been up and running on 38302 for 2 days now...
If anything it's better than 38253 was...
No hiccups at all on installation.
No problems encountered in operation for the past two days of use...

_________________
WRT1900ACSv2
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 339
Location: South Carolina

PostPosted: Fri Jan 18, 2019 2:25    Post subject: Reply with quote
DaveI wrote:
Must have been a model specific incompatiblity...


DaveI,

I agree. I have a buffalo router that's running r38302 just fine (Or at least with the options I use on that router). But, my wrt3200acm won't even begin to take the load. Fails almost instantly.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum