EA8500
DD-WRT v3.0-r38253 std (01/10/19)
Linux 4.9.149 #243 SMP Thu Jan 10 00:06:04 CET 2019 armv7l
no reset -- GUI install over r38240
switch / ovpn server / samba share Ext4
all I'm using here is working
###
WNDR3700 V4
DD-WRT v3.0-r38253 std (01/10/19)
Linux 3.18.131 #30242 Thu Jan 10 05:34:54 CET 2019 mips
no reset -- GUI install over r38240
switch / ovpn server / samba share Ext4
tis worky ok
Posted: Fri Jan 11, 2019 5:12 Post subject: Upgrades
All WebGUI upgrades. The rest have not been upgraded as they are not currently in use (seasonal use only).
Router/Version: TP-Link Archer C7 v2
Firmware: 38253
Previous: 38240
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far. Please fix WPA3 so that I can at least attempt to use it.
Router/Version: D-Link DIR-862L A1
Firmware: 38253
Previous: 38240
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Joined: 16 Nov 2015 Posts: 6411 Location: UK, London, just across the river..
Posted: Fri Jan 11, 2019 9:20 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r38253 std (01/10/19)
Kernel Version Linux 3.18.131 #30216 Thu Jan 10 04:44:06 CET 2019 mips
update: GUI
reset: NO
status: Operational 18h
errors: Nothing that concerns my set up..so far so good.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 21 Jan 2017 Posts: 1782 Location: Illinois Moderator
Posted: Sat Jan 12, 2019 1:07 Post subject:
R/\ZV/\N wrote:
Errors: 5GHz band LED indicator still off
The LED issue is very common on many router brands supported by DD-wrt on K4.9+. Since it's cosmetic, brainslayer ignores it. Don't hold your breath for a fix any time soon.
Joined: 04 Dec 2013 Posts: 92 Location: Râmnicu Vâlcea, România
Posted: Sat Jan 12, 2019 1:31 Post subject:
msoengineer wrote:
R/\ZV/\N wrote:
Errors: 5GHz band LED indicator still off
The LED issue is very common on many router brands supported by DD-wrt on K4.9+. Since it's cosmetic, brainslayer ignores it. Don't hold your breath for a fix any time soon.
Well... all the LEDs are cosmetics?
When I damage something I try to fix it. No? That's why I wrote about that LED, maybe he'll remember to fix it.
mrjcd wrote:
ya the EA8500 top light on router does not work using any K4.x dd-wrt BS or Kong but she lights up ok using the old K3.x builds
Router Model Buffalo WZR-HP-AG300H
Firmware Version DD-WRT v3.0-r38253 std (01/10/19)
Kernel Version Linux 3.10.108-d7 #71887 Thu Jan 10 01:48:50 CET 2019 mips
Reset: YES
When Wireless MAC Filter is set, a warning is displayed on the iphone with a incorrect wifi password. (iOS 12 WPA2-PSK AES)
This error does not occur on Broadcom routers. (r38253 buffalo wzr1750dhp)
I confirmed that there is no typing error in the MAC address.
Router: Netgear R7800
Firmware: DD-WRT v3.0-r38253 (01/10/19)
Kernel: Linux 4.9.149 #243 SMP Thu Jan 10 00:06:04 CET 2019 armv7l
Status: Working
Reset: No
Previous: 38100M
Errors: No
Temperatures : CPU 45.768 °C / ath0 21 °C / ath1 19 °C
Working very well :
Router mode : DHCP
SFE Enable STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
ath0, ath1
Vpn (OpenVPN Client)
Router: D-Link DIR-859 A3
Firmware: DD-WRT v3.0-r38253 std (01/10/19)
Kernel: Linux 3.18.131 #30232 Thu Jan 10 05:12:51 CET 2019 mips
Status: Issue. The Web interface is slow.
Reset: No
Upgraded from 37442 via web interface
- 2.4Ghz and 5Ghz radios enabled
- QOS enabled
- Port forwarding enabled
- ath0.1 guest interface enabled
Last edited by Deltabongo2 on Sat Jan 26, 2019 19:12; edited 1 time in total