[redevil]

Hi,

I need your advise since I got problem with my e4200. I managed to install dd-wrt k2.6 and I want to change the vlan on the e4200 port. But when I set the vnram I forgot to add " and looks like the value are wrong.

Below is the original set:
root@DD-WRT:~# nvram show | grep vlan.*ports |sort
size: 32176 bytes (229968 left)
vlan0ports=1 2 3 4 5*
vlan1ports=0 1 2 3 8*
vlan2ports=4 8
root@DD-WRT:~# nvram show | grep port.*vlans | sort
size: 32176 bytes (229968 left)
port0vlans=1
port1vlans=0
port2vlans=0
port3vlans=0
port4vlans=0
port5vlans=0 1 16
root@DD-WRT:~# nvram show | grep vlan.*hwname | sort
size: 32176 bytes (229968 left)
vlan0hwname=et0
vlan1hwname=et0
vlan2hwname=et0

and below is the command that I copy and paste to the e4200:

nvram set vlan0ports = 1 2 3 4t 5*
nvram set vlan1ports = 0 8*
nvram set vlan2ports = 4t 5
nvram set port0vlans = 1 18 19
nvram set port1vlans = 0 18 19
nvram set port2vlans = 0 18 19
nvram set port3vlans = 0 18 19
nvram set port4vlans = 0 1 2 16 18 19
nvram set port5vlans = 0 1 2 16
nvram commit
reboot

I tried hard reset 30-30-30 couple times but still no luck. I cannot ping the e4200 again so I dont how to access it again. Is it my e4200 already become brick? Or there is another way to get it back?

Thank you for your help and advise.

Regards.