E4200 v1 lost access after set port nvram

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions
Author Message
redevil
DD-WRT Novice


Joined: 26 Dec 2018
Posts: 1

PostPosted: Wed Dec 26, 2018 12:24    Post subject: E4200 v1 lost access after set port nvram Reply with quote
Hi,

I need your advise since I got problem with my e4200. I managed to install dd-wrt k2.6 and I want to change the vlan on the e4200 port. But when I set the vnram I forgot to add " and looks like the value are wrong.

Below is the original set:
root@DD-WRT:~# nvram show | grep vlan.*ports |sort
size: 32176 bytes (229968 left)
vlan0ports=1 2 3 4 5*
vlan1ports=0 1 2 3 8*
vlan2ports=4 8
root@DD-WRT:~# nvram show | grep port.*vlans | sort
size: 32176 bytes (229968 left)
port0vlans=1
port1vlans=0
port2vlans=0
port3vlans=0
port4vlans=0
port5vlans=0 1 16
root@DD-WRT:~# nvram show | grep vlan.*hwname | sort
size: 32176 bytes (229968 left)
vlan0hwname=et0
vlan1hwname=et0
vlan2hwname=et0

and below is the command that I copy and paste to the e4200:

nvram set vlan0ports = 1 2 3 4t 5*
nvram set vlan1ports = 0 8*
nvram set vlan2ports = 4t 5
nvram set port0vlans = 1 18 19
nvram set port1vlans = 0 18 19
nvram set port2vlans = 0 18 19
nvram set port3vlans = 0 18 19
nvram set port4vlans = 0 1 2 16 18 19
nvram set port5vlans = 0 1 2 16
nvram commit
reboot

I tried hard reset 30-30-30 couple times but still no luck. I cannot ping the e4200 again so I dont how to access it again. Is it my e4200 already become brick? Or there is another way to get it back?

Thank you for your help and advise.

Regards.
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum