Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Joined: 03 Jul 2013 Posts: 13 Location: United States
Posted: Mon Dec 17, 2018 5:22 Post subject:
Router: R7000
Firmware: DD-WRT v3.0-r37985M kongac (12/16/1
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Status: Working with workaround
Reset: Yes. Nvram erase and reset button
Errors: Yes. VAP still broken. Workaround will bring it up for a few minutes, but it shuts off again shortly after.
Joined: 18 Feb 2007 Posts: 87 Location: Bern, Switzerland
Posted: Mon Dec 17, 2018 5:55 Post subject: Buffalo WZR-1750DHP
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r37985M kongac (12/16/18)
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Status: Up and running
Reset: No
Fixed errors:
- VAP *is* working after reboot without any workaround
Errors:
- VAPs get lost after changes to wireless settings through WebGUI until reboot _________________ Deployed:
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Router
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Client Bridge
Buffalo WZR-1750 - v3.0-r38100M kongac (12/27/18) - Router
Linksys WRT320 -> E2000 - v3.0-r33772 K30 mega (11/16/17) - Client Bridge
Router/Version: Netgear r6300v2
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Firmware: DD-WRT v3.0-r37985M kongac 12/16/18
Previous: DD-WRT v3.0-r37900M kongac 12/03/18
Reset: no
Errors: no
Bridged (wl0.1+wl1.1) and unbridged (wl0.2) VAP are working.
pix5650 wrote:
- VAPs get lost after changes to wireless settings through WebGUI until reboot
i can confirm this, but this is not a problem for me, i just reboot
Router: Netgear R7000
Firmware: DD-WRT v3.0-r37985M kongac (12/16/2018)
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Status: Working
Reset: No
Previous: 37900M
Errors: No
CPU Temperature : CPU 52.5 °C / WL0 45.0 °C / WL1 48.8 °C
Working very well :
Router mode : DHCP
SFE Enable STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
SPI Firewall
Usb
Nas, MiniDLNA, Samba, JFFS2,
wl0, wl1
Vpn (OpenVPN Client)
Joined: 08 Jun 2010 Posts: 109 Location: New Zealand
Posted: Mon Dec 17, 2018 20:17 Post subject:
Router: Asus RT-AC3200
Firmware Version DD-WRT v3.0-r37985M kongac 12/16/18
Kernel Version Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Previous Firmware: DD-WRT v3.0-r37715m kongac (11/15/18 )
Mode/Status: Gateway / AP / IPsec
Upgrade Method: "ddup --flash-latest". No 'erase nvram'
Reset: Soft Reboot after ddup and then Power Cycle
Uptime: 13h10m minutes
Errors: JFFS still dismounts spontaneously and I lose IPSEC settings. Also, no ability to disable Auto-Refresh in Management settings. Setting it to '0' seconds and clicking save/apply just immediately reverts to 6 seconds.
CPU Temp 66.4 °C
Issues/Errors: Lost JFFS and IPSEC settings again
Working: VAP for 2.4ghz is fine, but I have never had a problem with my VAP like other users seem to experience here. Perhaps it's an issue that doesn't effect the RT-AC3200?
Other Details: WL0 is disabled (just don't need it). WL1 enabled with a VAP. WL2 enabled and working.
Once again JFFS has dismounted and all my certs/users for IPSEC are gone and I have to manually reconfigure IPSEC and certs again. This is getting pretty frustrating as just when I find myself at a remote location needing a VPN connection I have to configure the router, ipad and iphone again.
Also, I still cannot get my Win10 laptop configured and able to connect via IPSEC. Some sort of issue with certificates and authentication that I just don't understand. If anyone knows how a good step-by-step to configuring win10 to connect to Kong DD-WRT IPSEC, please check my post in Advanced Networking or DM me.
Posted: Tue Dec 18, 2018 14:16 Post subject: Asus RT-AC68U A1
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r37985M kongac (12/16/18)
Previous: DD-WRT v3.0-r37900M kongac (12/03/18)
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Previous: Linux 4.4.166 #616 SMP Mon Dec 3 01:16:12 CET 2018 armv7l
Status: ok
Reset: no (ddup --flash-latest)
Errors: no
Uptime: 19:53
Router: Netgear R7000P
Firmware: DD-WRT v3.0-r37985M kongac (12/16/18)
Previous: DD-WRT v3.0-r37900M kongac (12/03/18)
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7
Status: Working
Reset: No
Load Average: 8% 0.16, 0.09, 0.02
Temperatures: CPU 59.1 °C / WL0 43.3 °C / WL1 52.3 °C
No fancy config, pretty much default settings with a 300/30 PPPoE FTTP connection.
Firmware Version: DD-WRT v3.0-r37985M kongac (12/16/2018)
Kernel Version: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l
Upgraded: from DD-WRT v3.0-r37900M kongac (12/03/2018) via ddup --flash-latest
Reset: No not this time
Status: Up and running for 48 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS and miniDLNA working., OpenVPN server working
Posted: Wed Dec 19, 2018 17:51 Post subject: Re: ac68u vaps
diogosena wrote:
VAP is worst than previous version here, even the workaround doesn't always work
I used 37845M, 37900M and now 37985M and all 3 builds I had/have working VAPs. I have 2 "g-only" devices for Internet Radio listening and they have the same up time as the router which are on VAP WL0.2. Radio WL0 is setup as NG-Mixed HT40 (upper). I have a work laptop that uses VAP WL1.1 that has a company VPN and I haven't seen it drop. Radio WL1 is setup as AC/N-Mixed VHT80 (lower,lower).
Any changes to the WiFi Settings always reboot. I don't use Radio scheduling which maybe a problem too. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Posted: Thu Dec 20, 2018 9:45 Post subject: Re: ac68u vaps
mac913 wrote:
diogosena wrote:
VAP is worst than previous version here, even the workaround doesn't always work
I used 37845M, 37900M and now 37985M and all 3 builds I had/have working VAPs. I have 2 "g-only" devices for Internet Radio listening and they have the same up time as the router which are on VAP WL0.2. Radio WL0 is setup as NG-Mixed HT40 (upper). I have a work laptop that uses VAP WL1.1 that has a company VPN and I haven't seen it drop. Radio WL1 is setup as AC/N-Mixed VHT80 (lower,lower).
Any changes to the WiFi Settings always reboot. I don't use Radio scheduling which maybe a problem too.
I use VAP on both radios, both aren't working, and the workaround doesn't work 90% of the time.
On 37900M the workaround always work
My 2x R7000 setup has been running Build 37985M for over 101 hours and also Family #1's R7000 has over 82 hours. This is a solid build, updated a 2nd Families' R7000. All 3 sites have working VAPs too.
Router: (Family #2) R7000 Gateway
Firmware: DD-WRT v3.0-r37985M kongac (12/16/18) (from r37715M)
Kernel: Linux 4.4.167 #625 SMP Sun Dec 16 17:55:24 CET 2018 armv7l (from Linux 4.4.163 #609 SMP)
Status: Working
Reset: No (update via ddup --flash-latest)
Errors: None, currently running/testing
Configuration/Setup
- WAN DHCP
- SFE Dsabled
- STP Disabled
- DNSMasq for IPv4 & IPv6
- Static Leases
- 2x DNSCrypt-Proxy via Startup
- NTP Client
- DDNS
- Gateway Mode
- 5x Local VLANs all Bridged via GUI
- 5x Bridges via GUI
- Wireless has 4x SSIDs (WL0,WL0.1,WL0.2 & WL1) all Bridged via GUI
- Wirless MAC Filtering on WL0 & WL1
- SSH, Telnet & SysLog Enabled
- WAN Traffic Disabled
- USB Storage
- SPI Firewall Enabled
- QoS Enabled
- 4x Cron Jobs
- Custom Startup & Firewall Commands with ebtables & ip6tables
- Running YAMon v3.4.5
- Running adbhostgen v20180727a1
Up for over 3 hours, will report back if any issues come up.
Thanks DD-WRT Developers! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
