When I upgraded, the progress bar never showed up, network access just died right there and the power light was flashing orange.
Waited a few minutes just in case it was doing anything, shut down the router and rebooted it.
It bugged up there. Even after rebooting, it still flash orange.
https://imgur.com/P3RgBel
Recovered via tftp, will retry.
Edit :
Status: Working as far as I can tell
Reset: Yes (and recovered a backup... so No?)
Errors: Wifi dies out after a while
Reinstalled from the Factory image after it failed the first time around. Now it's working....
Edit 2 : 2.4 wifi N-only, G-only, B-only, BG-mixed and NG-mixed all died. But somehow "mixed" still work.
I can still see the wifi network on my devices, but it refuses to actually connect to it. _________________ NETGEAR WNDR4300 ----> build r37961
Last edited by TetraSky on Wed Dec 12, 2018 23:49; edited 11 times in total
still a huge a mess & stripped, fragmented hostapd everywhere, missing nearly all 802.11v support when cheap routers out of box now a days have it.. k4.x qos problem isnt fixed on bs builds whatsoever. PIE is still missing since the k4.x switch, U-APSD missing.
will the rest of routers like dir_862L ever get 802.11r, w, wpa3 etc..? wtf already _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Linksys EA8500
DD-WRT v3.0-r37961 std 12/12/18
Linux 4.9.145-rc1 #229 SMP Wed Dec 12 01:06:18 CET 2018 armv7l
WAP / ovpn server / samba share
it's all working ok
---
Netgear WNDR3700 V4
DD-WRT v3.0-r37961 std 12/12/18
Linux 3.18.129-rc1 #27737 Wed Dec 12 05:18:27 CET 2018 mips
switch / ovpn server / samba share Ext4
all is good
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Thu Dec 13, 2018 10:15 Post subject:
Router: Netgear R9000 (Nighthawk X10 )
Firmware: DD-WRT v3.0-r37961 std (12/12/18 )
Kernel: Linux 4.9.145-rc1 #267 SMP Wed Dec 12 00:52:55 CET 2018 armv7l
Reset: No
Errors: up and running OK. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Posted: Thu Dec 13, 2018 11:57 Post subject: New Build - 12/12/2018 - r37961
Router: TP-Link Archer C7 V5
Reset: yes
Errors: 2,4 and 5 GHZ Wlan loose internet connection every 20-30 min. Only a restart bring back the internet.
5GHZ Wlan if choose channel 100-140 Wlan doesn´t work. Only if choose channel 36-64 it works.
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r37961 std 12/12/18
Kernel Version Linux 3.18.129-rc1 #27699 Wed Dec 12 04:10:52 CET 2018 mips
Uptime 45 min
Update from 37932 via LAN/GUI
Reset: Yes
Received (RX) 100% 480637 OK, no error
Transmitted (TX) 100% 348733 OK, no error
Status: Working very well as AP, NG mixed, HT40, WPA2-PSK AES, QOS
Posted: Fri Dec 14, 2018 4:16 Post subject: Upgrades
All WebGUI upgrades. The rest have not been upgraded as they are not currently in use (seasonal use only).
Router/Version: TP-Link Archer C7 v2
Firmware: 37961
Previous: 37932
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-862L A1
Firmware: 37961
Previous: 37932
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Posted: Fri Dec 14, 2018 10:44 Post subject: Results
Hi all. New to the forun. Three results and a question....
Router Model: TP-Link ARCHER-C7 v2
Status: working
Reset: web upgrade, no reset
Errors: none, sofar
Router Model: TP-Link WA850RE, range extender,
using WA901ND-v3 firmware
Status: working
Reset: web upgrade, no reset
Errors: none, sofar
Router Model: TP-Link WR940N, using WR940ND v6 firmw
Status: half working
Reset: web upgrade, reset
Errors: wired connections do not ping each other
Two first routers work, but the 940N ist just half working.
Connection to internet (LAN/WLAN-WAN) works,
connection from wired to wireless (WLAN-LAN) is ok too, but
LAN-LAN connection is not working. Wired boxes can't see
each other.