Tp link Archer c7 v5 EU

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5  Next
Author Message
davidddn
DD-WRT Novice


Joined: 03 Dec 2018
Posts: 4

PostPosted: Mon Dec 10, 2018 15:09    Post subject: Reply with quote
No joy on my A7 v5. Invalid file type from the web GUI. Is there any way I can provide debugging info without serial console?

Edit - looks like I was mislead with regards to the C7 and A7 being identical. This pull request thread for openwrt build is relevant:

https://github.com/openwrt/openwrt/pull/1462
Sponsor
davidddn
DD-WRT Novice


Joined: 03 Dec 2018
Posts: 4

PostPosted: Tue Dec 11, 2018 21:16    Post subject: Reply with quote
I apologize, I didn't realize that a build for the A7 v5 appeared with the r37932 builds. Thanks for the hard work on this guys, it's very appreciated. Cheers!
Josyto
DD-WRT Novice


Joined: 18 Dec 2018
Posts: 1

PostPosted: Tue Dec 18, 2018 21:50    Post subject: Reply with quote
Hi all, i'm new in the forum Very Happy .

Yesterday I bought this model, Archer C7, I'm waiting to see what version I get.

If I receive version 5 I will comment on my impressions with DD-WRT, I see that there is a large community.

PD: I have read the introduction post: D
understracker
DD-WRT User


Joined: 28 Oct 2014
Posts: 51

PostPosted: Sun Jan 20, 2019 17:04    Post subject: Reply with quote
I got V5 (EU) as my new main router. I can confirm that the router bricks after saving settings (and reboot) on latest r38326. It enters an infite bootloop (probably kernel panic?).There isn't such problem on r37932.

PS.
Did some testing. It's only the latest revision that bricks the router. Beta r38326 is a bit larger than the previous r38253 which works properly.
psyhomb
DD-WRT Novice


Joined: 08 May 2011
Posts: 3

PostPosted: Mon Jan 21, 2019 0:27    Post subject: TP-Link Archer C7 v5 Reply with quote
Does anyone tried to install DD-WRT fw 01-18-2019-r38326 on TP-Link Archer C7 v5 router?

I didn't have success, even worse, my router was bricked, luckily Archer has built-in TFTP client and I've managed to easily recover my router from this state.

Then I managed to install previous version of DD-WRT firmware 01-10-2019-r38253 but with this version WiFi 5GHz does not work at all, also I noticed that Ethernet led doesn't show link state properly for some of the ports, for example led indicator for port 3 and 4 is always on, even when there is no connected cables and this not a big deal because all ports are functional, but like I mentioned WiFi 5GHz does not work at all and it looks to me like wifi firmware kind of issue, so I would like to know does anyone else has the same issue and is it known when we can expect a solution for it?

dmesg log:

Code:

<6>[    6.580000] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
<4>[    6.790000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
<4>[    6.800000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
<4>[    6.810000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
<6>[    7.050000] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
<6>[    7.060000] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
<6>[    7.070000] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00043 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ed0aafd8
<4>[    7.120000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
<6>[    7.130000] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 80494cd2
<4>[    7.230000] ath10k_pci 0000:00:00.0: otp stream is empty, using board.bin contents
<6>[    8.310000] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1


Also I've tried with OpenWRT and with proper kernel module and firmware for the atheros wifi adapter everything is working as expected!
understracker
DD-WRT User


Joined: 28 Oct 2014
Posts: 51

PostPosted: Wed Jan 23, 2019 0:00    Post subject: Re: TP-Link Archer C7 v5 Reply with quote
psyhomb wrote:
Does anyone tried to install DD-WRT fw 01-18-2019-r38326 on TP-Link Archer C7 v5 router?

I didn't have success, even worse, my router was bricked, luckily Archer has built-in TFTP client and I've managed to easily recover my router from this state.

Then I managed to install previous version of DD-WRT firmware 01-10-2019-r38253 but with this version WiFi 5GHz does not work at all, also I noticed that Ethernet led doesn't show link state properly for some of the ports, for example led indicator for port 3 and 4 is always on, even when there is no connected cables and this not a big deal because all ports are functional, but like I mentioned WiFi 5GHz does not work at all and it looks to me like wifi firmware kind of issue, so I would like to know does anyone else has the same issue and is it known when we can expect a solution for it?

dmesg log:

Code:

<6>[    6.580000] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
<4>[    6.790000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
<4>[    6.800000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
<4>[    6.810000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
<6>[    7.050000] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
<6>[    7.060000] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
<6>[    7.070000] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00043 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ed0aafd8
<4>[    7.120000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
<6>[    7.130000] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 80494cd2
<4>[    7.230000] ath10k_pci 0000:00:00.0: otp stream is empty, using board.bin contents
<6>[    8.310000] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1


Also I've tried with OpenWRT and with proper kernel module and firmware for the atheros wifi adapter everything is working as expected!


5GHz band works at my v5, but is not reliable. I have the same error at my dmesg output. You should chose proper channels at WIFI setting for 5GHz radio to work. Do not leave it on auto.

Check this: https://wiki.dd-wrt.com/wiki/index.php/QCA_wireless_settings#Wireless_Channel
fifi29
DD-WRT Novice


Joined: 27 Nov 2018
Posts: 20

PostPosted: Tue Jan 29, 2019 14:34    Post subject: Tp link Archer c7 v5 EU Reply with quote
I use Firmware r37961 everything works fine, also 5 Ghz wlan.
spyfly
DD-WRT User


Joined: 26 Jun 2010
Posts: 92

PostPosted: Tue Jan 29, 2019 22:40    Post subject: Reply with quote
what is the lastest firmware that works fine and i can install easy by the web browser???
spyfly
DD-WRT User


Joined: 26 Jun 2010
Posts: 92

PostPosted: Wed Jan 30, 2019 22:21    Post subject: Reply with quote
My archer c7 v5 with stock firmware i can update to 12-12-2018-r37961 and not bricks.

I can update from web gui of tp-link

https://dd-wrt.com/support/other-downloads/?path=betas%2F2018%2F12-12-2018-r37961%2Ftplink_archer-c7-v5%2F

works fine!
spyfly
DD-WRT User


Joined: 26 Jun 2010
Posts: 92

PostPosted: Fri Feb 01, 2019 23:11    Post subject: Reply with quote
the archer C7 v5 works very fine with R37961, wifi in 5gHz very well!!!
spyfly
DD-WRT User


Joined: 26 Jun 2010
Posts: 92

PostPosted: Sat Feb 02, 2019 0:09    Post subject: Reply with quote
Throughput Wan to lan dd-wrt 900Mbps
mariosbbs
DD-WRT Novice


Joined: 29 Jan 2019
Posts: 1

PostPosted: Sat Feb 02, 2019 9:15    Post subject: Reply with quote
spyfly wrote:
My archer c7 v5 with stock firmware i can update to 12-12-2018-r37961 and not bricks.

I can update from web gui of tp-link

https://dd-wrt.com/support/other-downloads/?path=betas%2F2018%2F12-12-2018-r37961%2Ftplink_archer-c7-v5%2F

works fine!



Hello, unfortunately all the downloads in "other download" web interface are empty from some days.
I've found a working dd-wrtv2 HTTPS downloads (latest is r38535) but right now my serial interface is broken so can't risk to brick the C7 starting from factory firmware. Some advice ? Thanks
understracker
DD-WRT User


Joined: 28 Oct 2014
Posts: 51

PostPosted: Sat Feb 02, 2019 12:28    Post subject: Reply with quote
mariosbbs wrote:
spyfly wrote:
My archer c7 v5 with stock firmware i can update to 12-12-2018-r37961 and not bricks.

I can update from web gui of tp-link

https://dd-wrt.com/support/other-downloads/?path=betas%2F2018%2F12-12-2018-r37961%2Ftplink_archer-c7-v5%2F

works fine!



Hello, unfortunately all the downloads in "other download" web interface are empty from some days.
I've found a working dd-wrtv2 HTTPS downloads (latest is r38535) but right now my serial interface is broken so can't risk to brick the C7 starting from factory firmware. Some advice ? Thanks


The latest working beta for v5 is ftp://ftp.dd-wrt.com/betas/2019/01-10-2019-r38253/tplink_archer-c7-v5/

Flash factory-to-ddwrt.bin from the stock firmare and you should be up and running.

In case of a bad flash you don't need a serial cable. This router can be debricked using tftp. You just have to use the lan cable that came with the router and have a Gbit Ethernet port on your pc.

PS

AFAIK r37961 is the most stable beta till now for v5. There's only some minor cosmetic issues with the LAN LEDs.

r38253 slows down after some hours on my device. Even telnet becomes unresponsive.
spyfly
DD-WRT User


Joined: 26 Jun 2010
Posts: 92

PostPosted: Sun Feb 03, 2019 12:32    Post subject: Reply with quote
the lastest version works fine?? not bricks???

I can be sure that 12-12-2018-r37961 version works fine and not bricks. Work web gui update from tp-link sotck firmware. Works wifi in 2.4 and 5Ghz... etc...

somebody has try the last version and can say the same!
overdrawn
DD-WRT Novice


Joined: 03 Feb 2019
Posts: 5

PostPosted: Mon Feb 04, 2019 13:32    Post subject: Reply with quote
understracker wrote:

PS

AFAIK r37961 is the most stable beta till now for v5. There's only some minor cosmetic issues with the LAN LEDs.



Hi understracker,

In this svn post, you mentioned that r37961 has problem with 5Ghz. Do have any firmware recommendation that has stable 5Ghz? I really need 5Ghz on my device. Thanks!
Goto page Previous  1, 2, 3, 4, 5  Next Display posts from previous:    Page 3 of 5
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum