still a huge a mess & stripped, fragmented hostapd everywhere, missing nearly all 802.11v support when cheap routers out of box now a days have it.. k4.x qos problem isnt fixed on bs builds whatsoever. PIE is still missing since the k4.x switch, U-APSD missing.
httpd still randomly giving 408 Request Timeouts when applying settings, stalling upon page refreshes etc... _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
WNDR3700 V4
DD-WRT v3.0-r37860 std 11/27/18
Linux 3.18.127-rc1 #26867 Tue Nov 27 04:19:20 GMT 2018 mips
switch / ovpn server / samba share Ext4
all worky good
----
WRT160NL
DD-WRT v3.0-r37860 std 11/27/18
Linux 3.10.108-d6 #68716 Tue Nov 27 02:06:49 GMT 2018 mips
no reset --- GUI install over r37837
switch / samba share FAT32
tis all worky good
EDIT:
Be aware this will NOT flash to a WRT160NL which has --
->Oops: flash id 0xc22017 .
you'll just get the flashy power light and have to TFTP a good build to it
last known build for this unit that will install is --
Linksys WRT160NL
DD-WRT v3.0-r34311 std (12/29/17)
Linux 3.10.108 #45960 Fri Dec 29 02:31:05 CET 2017 mips
Last edited by mrjcd on Fri Nov 30, 2018 1:50; edited 1 time in total
Status: working, buggy wlan (no change since 37837 fw)
Reset: no
Errors: on Archer no wlan 2.4 Ghz using wpa2, additional enabling wpa and tkip it works, then u can disable wpa and tkip to keep it working on wpa2 only.
Joined: 16 Nov 2015 Posts: 6414 Location: UK, London, just across the river..
Posted: Wed Nov 28, 2018 11:39 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r37860 std (11/27/1
Kernel Version Linux 3.18.127-rc1 #26843 Tue Nov 27 03:28:07 GMT 2018 mips
update: ddup 37582 > 37860
reset: NO
status: Operational but no WiFi connection is possible
errors: WI-FI SSID broadcasts but no connection is possible tried various WiFi clients no Wi Fi
security page it shows :
Security Mode WPA
Network Authentication
WPA Personal
WPA2 Personal
CCMP-128 (AES)
all those boxes are selected
luckily this router i use is only for routing and no WiFi is needed ill keep this build on it but will not
update my other routers with it..buggy... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Update from 37837
Reset: After update & reboot -> reset to defaults
Wifi: Not working after reset (Status > Wireless > Channel unkonwn)... Working OK after Save/Apply in Wireless > Settings.
Not sure but maybe a little worse bufferbloat with QOS in dslreports.
Posted: Wed Nov 28, 2018 21:06 Post subject: Upgrades
All WebGUI upgrades. The rest have not been upgraded as they are not currently in use (seasonal use only).
Router/Version: TP-Link Archer C7 v2
Firmware: 37860
Previous: 37837
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link TL-WR841ND v8
Firmware: 37860
Previous: 37837
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: Netgear WNDR3700v2
Firmware: 37860
Previous: 37837
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Router Model: R9000
Status: Running
Reset: Yes
Errors: CPU0 High usage by KSOFTIRQD/0
Enabling QoS cause high utilization on CPU 0 by apparent process ksoftirqd/0 provoking slow/poor transmissions speed on WAN, WLAN and LAN. This is occurring since the last 4 or 5 previous versions.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Nov 29, 2018 20:11 Post subject:
Luiso_G wrote:
Router Model: R9000
Status: Running
Reset: Yes
Errors: CPU0 High usage by KSOFTIRQD/0
Enabling QoS cause high utilization on CPU 0 by apparent process ksoftirqd/0 provoking slow/poor transmissions speed on WAN, WLAN and LAN. This is occurring since the last 4 or 5 previous versions.
u have 4 cores balance the interrupts manually, and get off brainslayer builds theyre bad and get no testing anymore use kong build _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router Model: R9000
Status: Running
Reset: Yes
Errors: CPU0 High usage by KSOFTIRQD/0
Enabling QoS cause high utilization on CPU 0 by apparent process ksoftirqd/0 provoking slow/poor transmissions speed on WAN, WLAN and LAN. This is occurring since the last 4 or 5 previous versions.
u have 4 cores balance the interrupts manually, and get off brainslayer builds theyre bad and get no testing anymore use kong build
Already tested it with same results... it is so bad that it drop the AC wifi speed down below 200Mb with only two clients connected and transmitting simultaneously, even with Kong's
I rolled back to latest Netgear F/W and it is working as it should with the exception of their DQoS which is, as always, broken.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Nov 29, 2018 22:16 Post subject:
Luiso_G wrote:
tatsuya46 wrote:
Luiso_G wrote:
Router Model: R9000
Status: Running
Reset: Yes
Errors: CPU0 High usage by KSOFTIRQD/0
Enabling QoS cause high utilization on CPU 0 by apparent process ksoftirqd/0 provoking slow/poor transmissions speed on WAN, WLAN and LAN. This is occurring since the last 4 or 5 previous versions.
u have 4 cores balance the interrupts manually, and get off brainslayer builds theyre bad and get no testing anymore use kong build
Already tested it with same results... it is so bad that it drop the AC wifi speed down below 200Mb with only two clients connected and transmitting simultaneously, even with Kong's
I rolled back to latest Netgear F/W and it is working as it should with the exception of their DQoS which is, as always, broken.
I really would like to keep using DD-WRT...
did u try balancing interrupts? what wan speed are we talking about here? _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router Model: R9000
Status: Running
Reset: Yes
Errors: CPU0 High usage by KSOFTIRQD/0
Enabling QoS cause high utilization on CPU 0 by apparent process ksoftirqd/0 provoking slow/poor transmissions speed on WAN, WLAN and LAN. This is occurring since the last 4 or 5 previous versions.
u have 4 cores balance the interrupts manually, and get off brainslayer builds theyre bad and get no testing anymore use kong build
Already tested it with same results... it is so bad that it drop the AC wifi speed down below 200Mb with only two clients connected and transmitting simultaneously, even with Kong's
I rolled back to latest Netgear F/W and it is working as it should with the exception of their DQoS which is, as always, broken.
I really would like to keep using DD-WRT...
did u try balancing interrupts? what wan speed are we talking about here?
On WAN 230/26Mb out of 400/30Mb with 90%/90% ceiling with HFSQ/FS_CODEL (and ultimately any combination)
On WLAN 200Mb +/- out of 866Mb (I always was able to get 600+/-) with 5GHz HT160 Channel 100 UUU
On LAN 600+/- out of 1Gb transferring from PC to PC
KSOFTIRQD/0 was getting up to 16% with QoS On or Off
Also I've noted that since r37139 or so (can't remember exactly) this KSOFTIRQD/0 could get 12%(est) on CPU0 but was able to hit on WAN 250Mb out of 300Mb (at that time my ISP Plan was 300Mb).
On WLAN I could transmit to 400~500Mb
On LAN I can't really remember any drop/slow at that time.
All the test were toggling On/Off QoS and SFE respectively.
Right now on my R9000 I've installed NG OEM F/W V1.0.4.12 and can't spot nothing going above 0.X% on any scenario but of course their DQoS is garbage.