r7500v2 ddup from 37835M no reset working fine. Enabled RFC4039 Rapid Commit support option in dnsmasq, expecting to help mobile devices connects to wifi faster coming from cell data service
tatsuya46 wrote:
wpa3/802.11w is fixed.
Any real advantage? Looks like mostly for public wifi/open hotspots security. Wondering if speed vs wpa2
Great, so we no longer need to make the processor core affinity adjustment like so?: echo 1 > /proc/irq/101/smp_affinity
echo 2 > /proc/irq/100/smp_affinity _________________ Netgear R7500v2, DD-WRT v3.0-r37845M kongat
Netgear R7000, DD-WRT v3.0-r37715M kongac
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat Nov 24, 2018 2:05 Post subject:
jerrytouille wrote:
r7500v2 ddup from 37835M no reset working fine. Enabled RFC4039 Rapid Commit support option in dnsmasq, expecting to help mobile devices connects to wifi faster coming from cell data service
tatsuya46 wrote:
wpa3/802.11w is fixed.
Any real advantage? Looks like mostly for public wifi/open hotspots security. Wondering if speed vs wpa2
wp3 requires it
bripab007 wrote:
tatsuya46 wrote:
cpu interrupts adjusted, only wan is on core 1
Great, so we no longer need to make the processor core affinity adjustment like so?: echo 1 > /proc/irq/101/smp_affinity
echo 2 > /proc/irq/100/smp_affinity
So when setting to WPA3 PSK, we'd need to set 802.11w to Enable or Auto? _________________ Netgear R7500v2, DD-WRT v3.0-r37845M kongat
Netgear R7000, DD-WRT v3.0-r37715M kongac
EA8500
DD-WRT v3.0-r37845M kongat 11/24/18
Linux 4.9.140 #271 SMP PREEMPT Sat Nov 24 01:32:32 CET 2018 armv7l
main router -- no reset -- GUI install over r37835M
everything working good
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat Nov 24, 2018 2:58 Post subject:
bripab007 wrote:
tatsuya46 wrote:
wpa3/802.11w is fixed.
wp3 requires it
So when setting to WPA3 PSK, we'd need to set 802.11w to Enable or Auto?
its auto enabled by default when selecting wpa3, its in the hostapd conf, just the gui doesnt update to show it. if doing wpa3 only, then its enabled aka forced. if using wpa3 mixed with wpa2 or wpa, then its auto aka supported but not forced.
jerrytouille wrote:
anticant wrote:
Which file do I use if I have a TP-Link ARCHER-C7 v4 ?
Not supported by Kong.
Hmm tried wpa3 with aes, sae passphrase, and 802.11w enabled. Didn’t work, Win10 October update. Am I missing something?
client device dont support wpa3 yet _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Sat Nov 24, 2018 12:50 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r37845M kongat (11/24/1
Kernel Version Linux 4.9.140 #270 SMP PREEMPT Sat Nov 24 01:13:47 CET 2018 armv7l
update: ddup 37630 3.18 > 37845
reset: NO
status: Operational
errors: 802.11w Mgmt Frame Protection "enabled" is jamming the WiFi...WiFi connection is not possible
in sys log it says devices are connected and authenticated but no connection at all...
so 802.11w Mgmt Frame Protection is either client dependant or not working with WPA2 AES
haven't done reset and removed all those lines from start up
so no MAX CPU speed and no changes in CPU's process/affinity will keep eye on it...
just noticed no WiFi security encryption is selected in wi-fi settings but as
no reset its still with default WPA2 AES only...i guess P.S. appeared after reboot
also had to remove all the settings in hostapd before this update... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sun Nov 25, 2018 11:11; edited 2 times in total