Author
Message
Format_C DD-WRT Novice Joined: 25 Oct 2017 Posts: 29
Posted: Wed Nov 21, 2018 22:00 Post subject: Netgear R6400 (V1) & A6200 Can't see 5GHZ Network
I have a Netgear R6400 (V1) and a Netgear A6200 AC WiFi adapter. I have installed DD-WRT and the A6200 now cannot see either (Main or Guest) of the 5GHZ networks. It worked fine of the OEM Netgear Genie Firmware. What did I do wrong?
I am using this version of DD-WRT
Code: DD-WRT v3.0-r37015M kongac (09/23/18)
Linux 4.4.157 #603 SMP Sun Sep 23 01:10:11 CEST 2018 armv7l
Thanks
Description:
Filesize:
22.42 KB
Viewed:
1350 Time(s)
Back to top
Sponsor
bushant DD-WRT Guru Joined: 18 Nov 2015 Posts: 2036
Back to top
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Thu Nov 22, 2018 10:02 Post subject:
Like @Bushant said: do not use auto.
Tested domains are US, Eur and Germany, but others will probably work also.
Furthermore some clients do not play nice with 80 MHz channel width, start with 40 and when it works you can go to 80.
Set mode to AC/N.
On Wireless security set Rekey interval to 0
Start without the VAP (just delete it and reboot, your settings are saved , so you can easily enable it again), there are a lot of problems with connecting to a VAP, but there are workarounds available.
_________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
bushant DD-WRT Guru Joined: 18 Nov 2015 Posts: 2036
Back to top
Format_C DD-WRT Novice Joined: 25 Oct 2017 Posts: 29
Posted: Fri Nov 23, 2018 22:43 Post subject:
Thank You bushant @ egc.
I selected a Channel (161, VHT80, Upper Upper) I can now see and connect to the 5GHZ network with the A6200.
Thanks again!
Now if I can only figure out how to properly do a guest network with one on each band so far I can only get it working with one band
Back to top
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Sat Nov 24, 2018 11:40 Post subject:
In the first post of the build thread there are 2 work arounds mentioned when you have VAP problems, you could try them.
see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=317466
_________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top