New BS Build - 11/17/2018 - r37736

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1301

PostPosted: Sat Nov 17, 2018 15:11    Post subject: New BS Build - 11/17/2018 - r37736 Reply with quote
New BS Build - 11/17/2018 - r37736

ftp://ftp.dd-wrt.com/betas/2018/11-17-2018-r37736/

Please report errors on this topic.


Release Notes:
http://svn.dd-wrt.com/timeline
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=279466


Router Model:

Status:
Reset:
Errors:
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8440
Location: Texas, USA

PostPosted: Sat Nov 17, 2018 16:53    Post subject: Reply with quote
Changelog: https://svn.dd-wrt.com/log/?rev=37736&stop_rev=37583&limit=300

"This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build."


Last edited by kernel-panic69 on Wed Nov 21, 2018 20:35; edited 1 time in total
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1521
Location: Belgrade

PostPosted: Sat Nov 17, 2018 19:11    Post subject: Reply with quote
Router Model Netgear R6250
Firmware Version DD-WRT v3.0-r37736 std (11/17/1Cool
Kernel Version Linux 4.4.163 #4178 SMP Fri Nov 16 09:11:15 GMT 2018 armv7l

Stastus: Working rock solid (PPPoE to my ISP, Unbound with local domain, 2,4Ghz & 5 Ghz AP, QoS)
Reset: No
Errata: None

Thx BS!
mitza97
DD-WRT User


Joined: 29 Dec 2011
Posts: 138

PostPosted: Sat Nov 17, 2018 19:16    Post subject: Reply with quote
Router Model ASUS RT-N18U
Firmware Version DD-WRT v3.0-r37736 std (11/17/18
Linux 4.4.163 #4182 Sat Nov 17 06:42:55 GMT 2018 armv7l

Status: Working (PPPoE-Gateway)
Reset: No
Errors: no errors, lan led still not working.
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Sat Nov 17, 2018 19:32    Post subject: Reply with quote
Router/Version: Buffalo WZR-1750DHP/DHPD
Firmware: DD-WRT v3.0-r37736 std (11/17/18
Kernel: Linux 4.4.163 #4178 SMP Fri Nov 16 09:11:15 GMT 2018 armv7l
Previous: BSr37582 (which worked well and i got QoS to work with some sysctl -w changes)
Mode/Status: Gateway / WIFI = AP / Seems ok
CPU overclocked to 1400mhz from default 800mhz via r33006
Reset: No
Issues/Errors: see things i noticed below
UpTime: 1h15m

Sysctl changes
sysctl -w fs.file-max=2097152
sysctl -w net.core.somaxconn=1024
sysctl -w net.core.netdev_max_backlog=65536
sysctl -w net.core.rmem_max=134217728
sysctl -w net.core.wmem_max=134217728
sysctl -w net.core.rmem_default=134217728
sysctl -w net.core.wmem_default=134217728
sysctl -w net.ipv4.tcp_rmem='20480 12582912 134217728'
sysctl -w net.ipv4.udp_rmem_min=16384
sysctl -w net.ipv4.tcp_wmem='20480 12582912 134217728'
sysctl -w net.ipv4.udp_wmem_min=16384
sysctl -w net.ipv4.tcp_mem='134217728 134217728 134217728'
sysctl -w net.ipv4.tcp_max_syn_backlog=10240
sysctl -w net.ipv4.route.flush=1
sysctl -w net.ipv4.tcp_rfc1337=1
sysctl -w net.ipv4.tcp_timestamps=0
sysctl -w net.ipv4.tcp_ecn=1
sysctl -w net.ipv4.tcp_low_latency=1
sysctl -w net.ipv4.ip_no_pmtu_disc=1
sysctl -w net.ipv4.tcp_mtu_probing=1
sysctl -w net.ipv4.tcp_slow_start_after_idle=0
sysctl -w net.ipv4.tcp_fin_timeout=30
sysctl -w net.ipv4.tcp_max_tw_buckets=1440000
sysctl -w net.ipv4.tcp_tw_recycle=1
sysctl -w net.ipv4.tcp_tw_reuse=1
sysctl -w net.ipv4.tcp_max_orphans=60000
iptables -t mangle -I PREROUTING -i `nvram get wan_iface` -j TTL --ttl-set 40
iptables -t mangle -I POSTROUTING -o `get_wanface` -j TTL --ttl-set 40

What i have noticed:-
1) flashed without reset and i had to power cycle the router to get to telnet to the router
2) on build r34760 Current Bridging Table is listed as br0 = vlan1 eth1 eth2 with builds 36xxx up to this build Current Bridging Table is listed as br0 = eth1 eth 2 vlan1
3) In the Status page under LAN there is a entry of the connection between my router and the ISP's router/modem showing the gateway IP on vlan2 and connections which is 0.

In the syslog i see these appearing in yellow...the first one, i think, is from my ISP's modem mode. When i switch my ISP's router/modem to modem mode i get an IP of 0.0.0.0 showing as the wan IP and the ISP said that is due to the fact that the when the router/modem is in modem mode it shuts off all routing. I personally think it is some config that they feel is best.
1) Nov 17 17:50:39 FulCruM daemon.warn radvd[2550]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
2) Nov 17 17:50:17 FulCruM daemon.warn radvd[1728]: exiting, 1 sigterm(s) received
3) Nov 17 17:50:39 FulCruM kern.warn kernel: Hooks already unregistered
4) Nov 17 17:50:39 FulCruM kern.warn kernel: Interface br0 doesn't exist

Know that i ran all commands with QoS and UPnP enabled. Also know that all IP and or MAC addresses do coinside with my network but i will change of leave out any IP/MAC addresses for the following requested data.

1) iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT udp -- anywhere anywhere udp spt:bootps dpt:bootpc
DROP udp -- anywhere anywhere udp dpt:route
ACCEPT udp -- anywhere anywhere udp dpt:route
ACCEPT udp -- anywhere anywhere udp dpt:route
ACCEPT ipv6 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere
DROP icmp -- anywhere anywhere
DROP igmp -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
ACCEPT 0 -- anywhere anywhere state NEW
DROP 0 -- anywhere anywhere

Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT gre -- 192.168.1.0/24 anywhere
ACCEPT tcp -- 192.168.1.0/24 anywhere tcp dpt:1723
lan2wan 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:27627
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27627
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:1500
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3005
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3101
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:4380
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27030
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:28960
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:3074
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27030
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:1150
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:1150
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:28910
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:5165
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27901
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27015
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27030
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:4380
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:27627
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:27627
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:1500
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3005
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3101
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:3478:4380
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:27000:27030
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:28960
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:3074
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:27000:27030
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpts:1116:1150
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:1116:1150
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpt:28910
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:5161:5165
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:27900:27901
ACCEPT tcp -- anywhere TheInterConnect.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:27000:27015
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpts:27015:27030
ACCEPT udp -- anywhere TheInterConnect.flowtrinidad.com udp dpt:4380
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
ACCEPT 0 -- anywhere anywhere state NEW
DROP 0 -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere

Chain advgrp_1 (0 references)
target prot opt source destination

Chain advgrp_10 (0 references)
target prot opt source destination

Chain advgrp_11 (0 references)
target prot opt source destination

Chain advgrp_12 (0 references)
target prot opt source destination

Chain advgrp_13 (0 references)
target prot opt source destination

Chain advgrp_14 (0 references)
target prot opt source destination

Chain advgrp_15 (0 references)
target prot opt source destination

Chain advgrp_16 (0 references)
target prot opt source destination

Chain advgrp_17 (0 references)
target prot opt source destination

Chain advgrp_18 (0 references)
target prot opt source destination

Chain advgrp_19 (0 references)
target prot opt source destination

Chain advgrp_2 (0 references)
target prot opt source destination

Chain advgrp_20 (0 references)
target prot opt source destination

Chain advgrp_3 (0 references)
target prot opt source destination

Chain advgrp_4 (0 references)
target prot opt source destination

Chain advgrp_5 (0 references)
target prot opt source destination

Chain advgrp_6 (0 references)
target prot opt source destination

Chain advgrp_7 (0 references)
target prot opt source destination

Chain advgrp_8 (0 references)
target prot opt source destination

Chain advgrp_9 (0 references)
target prot opt source destination

Chain grp_1 (0 references)
target prot opt source destination

Chain grp_10 (0 references)
target prot opt source destination

Chain grp_11 (0 references)
target prot opt source destination

Chain grp_12 (0 references)
target prot opt source destination

Chain grp_13 (0 references)
target prot opt source destination

Chain grp_14 (0 references)
target prot opt source destination

Chain grp_15 (0 references)
target prot opt source destination

Chain grp_16 (0 references)
target prot opt source destination

Chain grp_17 (0 references)
target prot opt source destination

Chain grp_18 (0 references)
target prot opt source destination

Chain grp_19 (0 references)
target prot opt source destination

Chain grp_2 (0 references)
target prot opt source destination

Chain grp_20 (0 references)
target prot opt source destination

Chain grp_3 (0 references)
target prot opt source destination

Chain grp_4 (0 references)
target prot opt source destination

Chain grp_5 (0 references)
target prot opt source destination

Chain grp_6 (0 references)
target prot opt source destination

Chain grp_7 (0 references)
target prot opt source destination

Chain grp_8 (0 references)
target prot opt source destination

Chain grp_9 (0 references)
target prot opt source destination

Chain lan2wan (1 references)
target prot opt source destination

Chain logaccept (0 references)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere

Chain logdrop (0 references)
target prot opt source destination
DROP 0 -- anywhere anywhere

Chain logreject (0 references)
target prot opt source destination
REJECT tcp -- anywhere anywhere reject-with tcp-reset

Chain trigger_out (5 references)
target prot opt source destination
TRIGGER tcp -- anywhere anywhere tcp dpt:27627 TRIGGER type:out match:27627 relate:27627
TRIGGER udp -- anywhere anywhere udp dpt:27627 TRIGGER type:out match:27627 relate:27627
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpt:1500 TRIGGER type:out udp match:1500 relate:1500
TRIGGER udp -- anywhere anywhere udp dpt:3005 TRIGGER type:out udp match:3005 relate:3005
TRIGGER udp -- anywhere anywhere udp dpt:3101 TRIGGER type:out udp match:3101 relate:3101
TRIGGER udp -- anywhere anywhere udp dpts:3478:4380 TRIGGER type:out udp match:3478-4380 relate:3478-4380
TRIGGER udp -- anywhere anywhere udp dpts:27000:27030 TRIGGER type:out udp match:27000-27030 relate:27000-27030
TRIGGER udp -- anywhere anywhere udp dpt:28960 TRIGGER type:out udp match:28960 relate:28960
TRIGGER udp -- anywhere anywhere udp dpt:3074 TRIGGER type:out udp match:3074 relate:3074
TRIGGER tcp -- anywhere anywhere tcp dpt:3074 TRIGGER type:out match:3074 relate:3074
TRIGGER udp -- anywhere anywhere udp dpt:3074 TRIGGER type:out match:3074 relate:3074
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpts:27000:27030 TRIGGER type:out udp match:27000-27030 relate:27000-27030
TRIGGER tcp -- anywhere anywhere tcp dpts:1116:1150 TRIGGER type:out match:1116-1150 relate:1116-1150
TRIGGER udp -- anywhere anywhere udp dpts:1116:1150 TRIGGER type:out match:1116-1150 relate:1116-1150
TRIGGER tcp -- anywhere anywhere tcp dpt:28910 TRIGGER type:out tcp match:28910 relate:28910
TRIGGER udp -- anywhere anywhere udp dpt:5165 TRIGGER type:out udp match:5165 relate:5165
TRIGGER udp -- anywhere anywhere udp dpts:27900:27901 TRIGGER type:out udp match:27900-27901 relate:27900-27901
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpts:27000:27015 TRIGGER type:out udp match:27000-27015 relate:27000-27015
TRIGGER udp -- anywhere anywhere udp dpts:27015:27030 TRIGGER type:out udp match:27015-27030 relate:27015-27030
TRIGGER udp -- anywhere anywhere udp dpt:4380 TRIGGER type:out udp match:4380 relate:4380


2) iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
DNAT icmp -- anywhere 333.333.3.33 to:192.168.1.1
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:27627 to:101.101.1.101:27627
DNAT udp -- anywhere 333.333.3.33 udp dpt:27627 to:101.101.1.101:27627
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:27014 to:101.101.1.101:27050
DNAT udp -- anywhere 333.333.3.33 udp dpt:1500 to:101.101.1.101:1500
DNAT udp -- anywhere 333.333.3.33 udp dpt:3005 to:101.101.1.101:3005
DNAT udp -- anywhere 333.333.3.33 udp dpt:3101 to:101.101.1.101:3101
DNAT udp -- anywhere 333.333.3.33 udp dpt:3478 to:101.101.1.101:4380
DNAT udp -- anywhere 333.333.3.33 udp dpt:27000 to:101.101.1.101:27030
DNAT udp -- anywhere 333.333.3.33 udp dpt:28960 to:101.101.1.101:28960
DNAT udp -- anywhere 333.333.3.33 udp dpt:3074 to:101.101.1.101:3074
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:3074 to:101.101.1.101:3074
DNAT udp -- anywhere 333.333.3.33 udp dpt:3074 to:101.101.1.101:3074
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:27014 to:101.101.1.101:27050
DNAT udp -- anywhere 333.333.3.33 udp dpt:27000 to:101.101.1.101:27030
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:1116 to:101.101.1.101:1150
DNAT udp -- anywhere 333.333.3.33 udp dpt:1116 to:101.101.1.101:1150
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:28910 to:101.101.1.101:28910
DNAT udp -- anywhere 333.333.3.33 udp dpt:5165 to:101.101.1.101:5165
DNAT udp -- anywhere 333.333.3.33 udp dpt:27900 to:101.101.1.101:27901
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:27014 to:101.101.1.101:27050
DNAT udp -- anywhere 333.333.3.33 udp dpt:27000 to:101.101.1.101:27015
DNAT udp -- anywhere 333.333.3.33 udp dpt:27015 to:101.101.1.101:27030
DNAT udp -- anywhere 333.333.3.33 udp dpt:4380 to:101.101.1.101:4380
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:27627 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:27627 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpts:27014:27050 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:1500 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:3005 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:3101 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:3478:4380 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:27000:27030 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:28960 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:3074 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:3074 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:3074 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpts:27014:27050 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:27000:27030 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpts:1116:1150 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:1116:1150 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpt:28910 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:5161:5165 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:27900:27901 to:101.101.1.101
DNAT tcp -- anywhere 333.333.3.33 tcp dpts:27014:27050 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:27000:27015 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpts:27015:27030 to:101.101.1.101
DNAT udp -- anywhere 333.333.3.33 udp dpt:4380 to:101.101.1.101
TRIGGER 0 -- anywhere 333.333.3.33 TRIGGER type:dnat match:0 relate:0

Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
SNAT 0 -- 192.168.1.0/24 anywhere to:333.333.3.33
MASQUERADE 0 -- anywhere anywhere mark match 0x80000000/0x80000000



3) cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00010000 "boot"
mtd1: 00010000 00010000 "nvram_cfe"
mtd2: 00010000 00010000 "nvram"
mtd3: 02000000 00020000 "linux"
mtd4: 01e60000 00020000 "rootfs"
mtd5: 06000000 00020000 "ddwrt"

4)cat /tmp/.ipt
*mangle
:PREROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]

-A PREROUTING -i ! vlan2 -d 333.333.3.33 -j MARK --set-mark 0x80000000/0x80000000
-A PREROUTING -j CONNMARK --save-mark
-I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu

COMMIT

*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A PREROUTING -p icmp -d 333.333.3.33 -j DNAT --to-destination 192.168.1.1
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 27627 -j DNAT --to-destination 101.101.1.101:27627
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27627 -j DNAT --to-destination 101.101.1.101:27627
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 27014 -j DNAT --to-destination 101.101.1.101:27050
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 1500 -j DNAT --to-destination 101.101.1.101:1500
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 3005 -j DNAT --to-destination 101.101.1.101:3005
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 3101 -j DNAT --to-destination 101.101.1.101:3101
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 3478 -j DNAT --to-destination 101.101.1.101:4380
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27000 -j DNAT --to-destination 101.101.1.101:27030
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 28960 -j DNAT --to-destination 101.101.1.101:28960
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 3074 -j DNAT --to-destination 101.101.1.101:3074
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 3074 -j DNAT --to-destination 101.101.1.101:3074
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 3074 -j DNAT --to-destination 101.101.1.101:3074
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 27014 -j DNAT --to-destination 101.101.1.101:27050
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27000 -j DNAT --to-destination 101.101.1.101:27030
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 1116 -j DNAT --to-destination 101.101.1.101:1150
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 1116 -j DNAT --to-destination 101.101.1.101:1150
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 28910 -j DNAT --to-destination 101.101.1.101:28910
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 5165 -j DNAT --to-destination 101.101.1.101:5165
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27900 -j DNAT --to-destination 101.101.1.101:27901
-A PREROUTING -p tcp -m tcp -d 333.333.3.33 --dport 27014 -j DNAT --to-destination 101.101.1.101:27050
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27000 -j DNAT --to-destination 101.101.1.101:27015
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 27015 -j DNAT --to-destination 101.101.1.101:27030
-A PREROUTING -p udp -m udp -d 333.333.3.33 --dport 4380 -j DNAT --to-destination 101.101.1.101:4380
-A PREROUTING -p tcp -d 333.333.3.33 --dport 27627:27627 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27627:27627 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 27014:27050 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 1500:1500 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 3005:3005 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 3101:3101 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 3478:4380 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27000:27030 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 28960:28960 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 3074:3074 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 3074:3074 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 3074:3074 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 27014:27050 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27000:27030 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 1116:1150 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 1116:1150 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 28910:28910 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 5161:5165 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27900:27901 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p tcp -d 333.333.3.33 --dport 27014:27050 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27000:27015 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 27015:27030 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -p udp -d 333.333.3.33 --dport 4380:4380 -j DNAT --to-destination 101.101.1.101
-A PREROUTING -d 333.333.3.33 -j TRIGGER --trigger-type dnat
-A POSTROUTING -s 192.168.1.1/24 -o vlan2 -j SNAT --to-source 333.333.3.33
-A POSTROUTING -m mark --mark 0x80000000/0x80000000 -j MASQUERADE
COMMIT

*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:logaccept - [0:0]
:logdrop - [0:0]
:logreject - [0:0]
:trigger_out - [0:0]
:lan2wan - [0:0]
:grp_1 - [0:0]
:advgrp_1 - [0:0]
:grp_2 - [0:0]
:advgrp_2 - [0:0]
:grp_3 - [0:0]
:advgrp_3 - [0:0]
:grp_4 - [0:0]
:advgrp_4 - [0:0]
:grp_5 - [0:0]
:advgrp_5 - [0:0]
:grp_6 - [0:0]
:advgrp_6 - [0:0]
:grp_7 - [0:0]
:advgrp_7 - [0:0]
:grp_8 - [0:0]
:advgrp_8 - [0:0]
:grp_9 - [0:0]
:advgrp_9 - [0:0]
:grp_10 - [0:0]
:advgrp_10 - [0:0]
:grp_11 - [0:0]
:advgrp_11 - [0:0]
:grp_12 - [0:0]
:advgrp_12 - [0:0]
:grp_13 - [0:0]
:advgrp_13 - [0:0]
:grp_14 - [0:0]
:advgrp_14 - [0:0]
:grp_15 - [0:0]
:advgrp_15 - [0:0]
:grp_16 - [0:0]
:advgrp_16 - [0:0]
:grp_17 - [0:0]
:advgrp_17 - [0:0]
:grp_18 - [0:0]
:advgrp_18 - [0:0]
:grp_19 - [0:0]
:advgrp_19 - [0:0]
:grp_20 - [0:0]
:advgrp_20 - [0:0]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i vlan2 -p udp --sport 67 --dport 68 -j ACCEPT
-A INPUT -p udp -i vlan2 --dport 520 -j DROP
-A INPUT -p udp -i br0 --dport 520 -j ACCEPT
-A INPUT -p udp --dport 520 -j ACCEPT
-A INPUT -p 41 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A INPUT -i vlan2 -p icmp -j DROP
-A INPUT -p igmp -j DROP
-A INPUT -i lo -m state --state NEW -j ACCEPT
-A INPUT -i br0 -m state --state NEW -j ACCEPT
-A INPUT -j DROP
-A OUTPUT -o br0 -j ACCEPT
-A FORWARD -j lan2wan
-A FORWARD -i br0 -o br0 -j ACCEPT
-A FORWARD -i br0 -o vlan2 -j ACCEPT
-I FORWARD -o vlan2 -s 192.168.1.1/24 -p tcp --dport 1723 -j ACCEPT
-I FORWARD -o vlan2 -s 192.168.1.1/24 -p gre -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27627 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27627 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 1500 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3005 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3101 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 4380 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27030 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 28960 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3074 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 3074 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3074 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27030 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 1150 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 1150 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 28910 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 5165 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27901 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27015 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27030 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 4380 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27627:27627 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27627:27627 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27014:27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 1500:1500 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3005:3005 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3101:3101 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3478:4380 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27000:27030 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 28960:28960 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3074:3074 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 3074:3074 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 3074:3074 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27014:27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27000:27030 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 1116:1150 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 1116:1150 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 28910:28910 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 5161:5165 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27900:27901 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 101.101.1.101 --dport 27014:27050 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27000:27015 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 27015:27030 -j ACCEPT
-A FORWARD -p udp -m udp -d 101.101.1.101 --dport 4380:4380 -j ACCEPT

-A FORWARD -i vlan2 -o br0 -j TRIGGER --trigger-type in

-A FORWARD -i br0 -j trigger_out

-A FORWARD -i vlan2 -o eth0 -j TRIGGER --trigger-type in

-A FORWARD -i eth0 -j trigger_out

-A FORWARD -i eth0 -m state --state NEW -j ACCEPT
-A FORWARD -i vlan2 -o eth1 -j TRIGGER --trigger-type in

-A FORWARD -i eth1 -j trigger_out

-A FORWARD -i eth1 -m state --state NEW -j ACCEPT
-A FORWARD -i vlan2 -o eth2 -j TRIGGER --trigger-type in

-A FORWARD -i eth2 -j trigger_out

-A FORWARD -i eth2 -m state --state NEW -j ACCEPT
-A FORWARD -i vlan2 -o vlan1 -j TRIGGER --trigger-type in

-A FORWARD -i vlan1 -j trigger_out

-A FORWARD -i vlan1 -m state --state NEW -j ACCEPT
-A FORWARD -i br0 -m state --state NEW -j ACCEPT
-A FORWARD -j DROP
-A trigger_out -p tcp --dport 27627:27627 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 27627-27627 --trigger-relate 27627-27627
-A trigger_out -p udp --dport 27627:27627 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 27627-27627 --trigger-relate 27627-27627
-A trigger_out -p tcp -m tcp --dport 27014:27050 -j TRIGGER --trigger-type out --trigger-proto tcp --trigger-match 27014-27050 --trigger-relate 27014-27050
-A trigger_out -p udp -m udp --dport 1500:1500 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 1500-1500 --trigger-relate 1500-1500
-A trigger_out -p udp -m udp --dport 3005:3005 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 3005-3005 --trigger-relate 3005-3005
-A trigger_out -p udp -m udp --dport 3101:3101 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 3101-3101 --trigger-relate 3101-3101
-A trigger_out -p udp -m udp --dport 3478:4380 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 3478-4380 --trigger-relate 3478-4380
-A trigger_out -p udp -m udp --dport 27000:27030 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 27000-27030 --trigger-relate 27000-27030
-A trigger_out -p udp -m udp --dport 28960:28960 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 28960-28960 --trigger-relate 28960-28960
-A trigger_out -p udp -m udp --dport 3074:3074 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 3074-3074 --trigger-relate 3074-3074
-A trigger_out -p tcp --dport 3074:3074 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 3074-3074 --trigger-relate 3074-3074
-A trigger_out -p udp --dport 3074:3074 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 3074-3074 --trigger-relate 3074-3074
-A trigger_out -p tcp -m tcp --dport 27014:27050 -j TRIGGER --trigger-type out --trigger-proto tcp --trigger-match 27014-27050 --trigger-relate 27014-27050
-A trigger_out -p udp -m udp --dport 27000:27030 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 27000-27030 --trigger-relate 27000-27030
-A trigger_out -p tcp --dport 1116:1150 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 1116-1150 --trigger-relate 1116-1150
-A trigger_out -p udp --dport 1116:1150 -j TRIGGER --trigger-type out --trigger-proto all --trigger-match 1116-1150 --trigger-relate 1116-1150
-A trigger_out -p tcp -m tcp --dport 28910:28910 -j TRIGGER --trigger-type out --trigger-proto tcp --trigger-match 28910-28910 --trigger-relate 28910-28910
-A trigger_out -p udp -m udp --dport 5165:5165 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 5165-5165 --trigger-relate 5165-5165
-A trigger_out -p udp -m udp --dport 27900:27901 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 27900-27901 --trigger-relate 27900-27901
-A trigger_out -p tcp -m tcp --dport 27014:27050 -j TRIGGER --trigger-type out --trigger-proto tcp --trigger-match 27014-27050 --trigger-relate 27014-27050
-A trigger_out -p udp -m udp --dport 27000:27015 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 27000-27015 --trigger-relate 27000-27015
-A trigger_out -p udp -m udp --dport 27015:27030 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 27015-27030 --trigger-relate 27015-27030
-A trigger_out -p udp -m udp --dport 4380:4380 -j TRIGGER --trigger-type out --trigger-proto udp --trigger-match 4380-4380 --trigger-relate 4380-4380
-I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-A logaccept -j ACCEPT
-A logdrop -j DROP
-A logreject -p tcp -j REJECT --reject-with tcp-reset
COMMIT



5) cat /var/log/messages
Dec 31 20:00:19 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Jan 1 00:00:19 FulCruM user.info : klogd : daemon successfully started
Jan 1 00:00:19 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:05.0: reg 0x10: [mem 0x18026000-0x18026fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:06.0: reg 0x10: [mem 0x18027000-0x18027fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:06.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:07.0: reg 0x10: [mem 0x18012000-0x18012fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:07.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:08.0: reg 0x10: [mem 0x18013000-0x18013fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:08.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:09.0: reg 0x10: [mem 0x18014000-0x18014fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0a.0: reg 0x10: [mem 0x1800b000-0x1800bfff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0a.0: reg 0x14: [mem 0x1800c000-0x1800cfff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.0: reg 0x10: [mem 0x18022000-0x18022fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.1: reg 0x10: [mem 0x18021000-0x18021fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0b.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0c.0: reg 0x10: [mem 0x18023000-0x18023fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0d.0: reg 0x10: [mem 0x18020000-0x18020fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0e.0: [14e4:0506] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0e.0: reg 0x10: [mem 0x18210000-0x1821ffff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0f.0: [14e4:0507] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0f.0: reg 0x10: [mem 0x18010000-0x18010fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:10.0: [14e4:0508] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0000:00:10.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:11.0: [14e4:0509] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:11.0: reg 0x10: [mem 0x18028000-0x18028fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:12.0: [14e4:050a] type 00 class 0xffffff
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:12.0: reg 0x10: [mem 0x18029000-0x18029fff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Fixing up bus 0 domain 0
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE1 link=1
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE1 switching to GEN2
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE1 link=1
Jan 1 00:00:19 FulCruM kern.info kernel: PCI host bridge to bus 0001:00
Jan 1 00:00:19 FulCruM kern.info kernel: pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
Jan 1 00:00:19 FulCruM kern.info kernel: pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0001:00:00.0: [14e4:8011] type 01 class 0x060400
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Fixing up bus 0 domain 1
Jan 1 00:00:19 FulCruM kern.info kernel: PCI: bus0: Fast back to back transfers disabled
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0001:01:00.0: reg 0x10: [mem 0x08000000-0x08007fff 64bit]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0001:01:00.0: supports D1 D2
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Fixing up bus 1 domain 1
Jan 1 00:00:19 FulCruM kern.info kernel: PCI: bus1: Fast back to back transfers disabled
Jan 1 00:00:19 FulCruM kern.debug kernel: pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
Jan 1 00:00:19 FulCruM kern.debug kernel: pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0001:00:00.0: PCI bridge to [bus 01]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE2 link=1
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE2 switching to GEN2
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE2 link=1
Jan 1 00:00:19 FulCruM kern.info kernel: PCI host bridge to bus 0002:00
Jan 1 00:00:19 FulCruM kern.info kernel: pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
Jan 1 00:00:19 FulCruM kern.info kernel: pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0002:00:00.0: [14e4:8011] type 01 class 0x060400
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Fixing up bus 0 domain 2
Jan 1 00:00:19 FulCruM kern.info kernel: PCI: bus0: Fast back to back transfers disabled
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0002:01:00.0: [14e4:4331] type 00 class 0x028000
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
Jan 1 00:00:19 FulCruM kern.warn kernel: pci 0002:01:00.0: can't set Max Payload Size to 512; if necessary, use "pci=pcie_bus_safe" and report a bug
Jan 1 00:00:19 FulCruM kern.debug kernel: pci 0002:01:00.0: supports D1 D2
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Fixing up bus 1 domain 2
Jan 1 00:00:19 FulCruM kern.info kernel: PCI: bus1: Fast back to back transfers disabled
Jan 1 00:00:19 FulCruM kern.debug kernel: pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
Jan 1 00:00:19 FulCruM kern.debug kernel: pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0002:01:00.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0002:00:00.0: PCI bridge to [bus 01]
Jan 1 00:00:19 FulCruM kern.info kernel: pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
Jan 1 00:00:19 FulCruM kern.info kernel: PCIE3 link=0
Jan 1 00:00:19 FulCruM kern.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 00:00:19 FulCruM kern.info kernel: io scheduler noop registered (default)
Jan 1 00:00:19 FulCruM kern.info kernel: io scheduler cfq registered
Jan 1 00:00:19 FulCruM kern.info kernel: serial8250_init
Jan 1 00:00:19 FulCruM kern.info kernel: Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
Jan 1 00:00:19 FulCruM kern.info kernel: console [ttyS0] disabled
Jan 1 00:00:19 FulCruM kern.info kernel: serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550
Jan 1 00:00:19 FulCruM kern.info kernel: console [ttyS0] enabled
Jan 1 00:00:19 FulCruM kern.info kernel: serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 6250000) is a 16550
Jan 1 00:00:19 FulCruM kern.info kernel: brd: module loaded
Jan 1 00:00:19 FulCruM kern.info kernel: loop: module loaded
Jan 1 00:00:19 FulCruM kern.warn kernel: Boot partition size = 2097152(0x200000)
Jan 1 00:00:19 FulCruM kern.notice kernel: Creating 3 MTD partitions on "bcmsflash":
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x000000000000-0x000000200000 : "boot"
Jan 1 00:00:19 FulCruM kern.warn kernel: mtd: partition "boot" extends beyond the end of device "bcmsflash" -- size truncated to 0x100000
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x0000000f0000-0x000000100000 : "nvram_cfe"
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x0000000e0000-0x0000000f0000 : "nvram"
Jan 1 00:00:19 FulCruM kern.warn kernel: Found a Esmt NAND flash:
Jan 1 00:00:19 FulCruM kern.warn kernel: Total size: 128MB
Jan 1 00:00:19 FulCruM kern.warn kernel: Block size: 128KB
Jan 1 00:00:19 FulCruM kern.warn kernel: Page Size: 2048B
Jan 1 00:00:19 FulCruM kern.warn kernel: OOB Size: 64B
Jan 1 00:00:19 FulCruM kern.warn kernel: Sector size: 512B
Jan 1 00:00:19 FulCruM kern.warn kernel: Spare size: 16B
Jan 1 00:00:19 FulCruM kern.warn kernel: ECC level: 8 (8-bit)
Jan 1 00:00:19 FulCruM kern.warn kernel: Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
Jan 1 00:00:19 FulCruM kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x0 size = 0x2000000, 0x20000
Jan 1 00:00:19 FulCruM kern.info kernel: found TRX Header on nflash!
Jan 1 00:00:19 FulCruM kern.notice kernel: nflash: squash filesystem with lzma found at block 13
Jan 1 00:00:19 FulCruM kern.notice kernel: Creating 2 MTD partitions on "nflash":
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x000000000000-0x000002000000 : "linux"
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x0000001a0000-0x000002000000 : "rootfs"
Jan 1 00:00:19 FulCruM kern.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:19 FulCruM kern.info kernel: PPP BSD Compression module registered
Jan 1 00:00:19 FulCruM kern.info kernel: PPP Deflate Compression module registered
Jan 1 00:00:19 FulCruM kern.info kernel: PPP MPPE Compression module registered
Jan 1 00:00:19 FulCruM kern.info kernel: NET: Registered protocol family 24
Jan 1 00:00:19 FulCruM kern.info kernel: GACT probability NOT on
Jan 1 00:00:19 FulCruM kern.info kernel: Mirror/redirect action on
Jan 1 00:00:19 FulCruM kern.info kernel: Simple TC action Loaded
Jan 1 00:00:19 FulCruM kern.info kernel: netem: version 1.3
Jan 1 00:00:19 FulCruM kern.info kernel: u32 classifier
Jan 1 00:00:19 FulCruM kern.info kernel: Performance counters on
Jan 1 00:00:19 FulCruM kern.info kernel: input device check on
Jan 1 00:00:19 FulCruM kern.info kernel: Actions configured
Jan 1 00:00:19 FulCruM kern.info kernel: Netfilter messages via NETLINK v0.30.
Jan 1 00:00:19 FulCruM kern.info kernel: nf_conntrack version 0.5.0 (8036 buckets, 32144 max)
Jan 1 00:00:19 FulCruM kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 00:00:19 FulCruM kern.info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:19 FulCruM kern.info kernel: ip_set: protocol 6
Jan 1 00:00:19 FulCruM kern.info kernel: gre: GRE over IPv4 demultiplexor driver
Jan 1 00:00:19 FulCruM kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan 1 00:00:19 FulCruM kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:19 FulCruM kern.info kernel: NET: Registered protocol family 17
Jan 1 00:00:19 FulCruM kern.info kernel: bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Jan 1 00:00:19 FulCruM kern.notice kernel: Bridge firewalling registered
Jan 1 00:00:19 FulCruM kern.info kernel: 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:19 FulCruM kern.notice kernel: Registering SWP/SWPB emulation handler
Jan 1 00:00:19 FulCruM kern.emerg kernel: found cfe nvram
Jan 1 00:00:19 FulCruM kern.info kernel: check if nvram copy is required CFE Size is 65536
Jan 1 00:00:19 FulCruM kern.info kernel: nvram copy magic is 48534C46
Jan 1 00:00:19 FulCruM kern.info kernel: max nvram space = 131072
Jan 1 00:00:19 FulCruM kern.info kernel: read 65536 bytes to offset 0
Jan 1 00:00:19 FulCruM kern.notice kernel: Key type encrypted registered
Jan 1 00:00:19 FulCruM kern.info kernel: Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
Jan 1 00:00:19 FulCruM kern.info kernel: nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
Jan 1 00:00:19 FulCruM kern.info kernel: nand: Eon NAND 128MiB 3,3V 8-bit
Jan 1 00:00:19 FulCruM kern.info kernel: nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Jan 1 00:00:19 FulCruM kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Jan 1 00:00:19 FulCruM kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Jan 1 00:00:19 FulCruM kern.warn kernel: Available 7 bytes at (off,len):
Jan 1 00:00:19 FulCruM kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Jan 1 00:00:19 FulCruM kern.info kernel: Scanning device for bad blocks
Jan 1 00:00:19 FulCruM kern.warn kernel: Bad eraseblock 1023 at 0x000007fe0000
Jan 1 00:00:19 FulCruM kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Jan 1 00:00:19 FulCruM kern.notice kernel: Creating 1 MTD partitions on "brcmnand":
Jan 1 00:00:19 FulCruM kern.notice kernel: 0x000002000000-0x000008000000 : "ddwrt"
Jan 1 00:00:19 FulCruM kern.info kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Jan 1 00:00:19 FulCruM kern.info kernel: Freeing unused kernel memory: 344K
Jan 1 00:00:19 FulCruM kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 00:00:19 FulCruM kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 00:00:19 FulCruM kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 00:00:19 FulCruM kern.info kernel: ET Corerev 5
Jan 1 00:00:19 FulCruM kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan 1 00:00:19 FulCruM kern.info kernel: roboswitch: Probing device 'eth0'
Jan 1 00:00:19 FulCruM kern.info kernel: roboswitch: trying a 53011! at eth0
Jan 1 00:00:19 FulCruM kern.info kernel: detected CPU Port is 5
Jan 1 00:00:19 FulCruM kern.info kernel: roboswitch: found a 53011! at eth0
Jan 1 00:00:19 FulCruM kern.info kernel: detected CPU Port is 5
Jan 1 00:00:19 FulCruM kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 00:00:19 FulCruM kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 00:00:19 FulCruM kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:19 FulCruM kern.warn kernel: PCI: Enabling device 0002:01:00.0 (0140 -> 0142)
Jan 1 00:00:19 FulCruM kern.warn kernel: eth2: Broadcom BCM4331 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:19 FulCruM kern.warn kernel: eth0: mixed HW and IP checksum settings.
Jan 1 00:00:19 FulCruM kern.info kernel: NET: Registered protocol family 10
Jan 1 00:00:19 FulCruM kern.info kernel: sit: IPv6 over IPv4 tunneling driver
Jan 1 00:00:19 FulCruM kern.info kernel: mip6: Mobile IPv6
Jan 1 00:00:19 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
Jan 1 00:00:19 FulCruM kern.info kernel: device br0 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: device vlan1 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: device eth1 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: device eth2 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: device br0 left promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: device br0 entered promiscuous mode
Jan 1 00:00:19 FulCruM kern.info kernel: device br0 left promiscuous mode
Jan 1 00:00:19 FulCruM user.info : syslogd : daemon successfully started
Dec 31 20:00:19 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Jan 1 00:00:19 FulCruM user.info : klogd : daemon successfully started
Jan 1 00:00:19 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Jan 1 00:00:19 FulCruM user.info : wland : daemon successfully started
Jan 1 00:00:19 FulCruM kern.info kernel: device vlan2 entered promiscuous mode
Jan 1 00:00:19 FulCruM user.info : nstxd : daemon successfully started
Jan 1 00:00:19 FulCruM kern.info kernel: IMQ: use 2 as queue number
Jan 1 00:00:19 FulCruM user.info : cron : daemon successfully started
Jan 1 00:00:19 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:19 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Jan 1 00:00:19 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Jan 1 00:00:19 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Jan 1 00:00:19 FulCruM cron.info cron[915]: (CRON) STARTUP (fork ok)
Jan 1 00:00:19 FulCruM daemon.info radvd[902]: version 2.17 started
Jan 1 00:00:19 FulCruM daemon.warn radvd[902]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Jan 1 00:00:19 FulCruM user.info : radvd : RADVD daemon successfully started
Jan 1 00:00:20 FulCruM kern.notice kernel: random: dnsmasq: uninitialized urandom read (128 bytes read, 111 bits of entropy available)
Jan 1 00:00:20 FulCruM kern.notice kernel: random: dnsmasq: uninitialized urandom read (48 bytes read, 111 bits of entropy available)
Jan 1 00:00:20 FulCruM user.info : dnsmasq : daemon successfully started
Jan 1 00:00:20 FulCruM kern.info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:21 FulCruM kern.notice kernel: random: nonblocking pool is initialized
Jan 1 00:00:21 FulCruM kern.info kernel: device vlan2 left promiscuous mode
Jan 1 00:00:21 FulCruM user.info : ttraff : traffic counter daemon successfully started
Jan 1 00:00:21 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:21 FulCruM user.info : dnsmasq : daemon successfully stopped
Jan 1 00:00:21 FulCruM user.info : dnsmasq : daemon successfully started
Jan 1 00:00:22 FulCruM daemon.info httpd[1216]: httpd : httpd server started at port 80
Jan 1 00:00:22 FulCruM daemon.info httpd[1268]: httpd : httpd server (ssl support) started at port 443
Jan 1 00:00:22 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:22 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 00:00:22 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 00:00:22 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 00:00:22 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 00:00:22 FulCruM user.info : httpd : https daemon successfully started
Jan 1 00:00:23 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:23 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 00:00:23 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 00:00:23 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 00:00:23 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 00:00:24 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Jan 1 00:00:24 FulCruM user.info : wland : daemon successfully stopped
Jan 1 00:00:24 FulCruM kern.info kernel: IMQ: use 2 as queue number
Jan 1 00:00:24 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Jan 1 00:00:24 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Jan 1 00:00:24 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Jan 1 00:00:25 FulCruM user.info : wland : daemon successfully started
Jan 1 00:00:25 FulCruM user.info : wan : WAN is up. IP: 333.333.3.33
Jan 1 00:00:25 FulCruM user.info : speedchecker : client started
Jan 1 00:00:25 FulCruM user.info : radvd : daemon successfully stopped
Jan 1 00:00:25 FulCruM daemon.warn radvd[924]: exiting, 1 sigterm(s) received
Jan 1 00:00:25 FulCruM daemon.info radvd[924]: sending stop adverts
Jan 1 00:00:25 FulCruM daemon.info radvd[924]: removing /var/run/radvd.pid
Jan 1 00:00:25 FulCruM daemon.info radvd[924]: returning from radvd main
Jan 1 00:00:25 FulCruM daemon.info radvd[1727]: version 2.17 started
Jan 1 00:00:25 FulCruM daemon.warn radvd[1727]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Jan 1 00:00:25 FulCruM user.info : radvd : RADVD daemon successfully started
Jan 1 00:00:25 FulCruM user.info : process_monitor : successfully started
Jan 1 00:00:25 FulCruM user.info : scc : speedchecker successfully stopped
Jan 1 00:00:25 FulCruM user.info : speedchecker : client started
Jan 1 00:00:25 FulCruM daemon.debug ntpclient[1731]: Connecting to time.google.com [216.239.35.0] ...
Nov 17 17:49:02 FulCruM daemon.info ntpclient[1731]: Time set from time.google.com [216.239.35.0].
Nov 17 17:49:02 FulCruM daemon.info process_monitor[1730]: cyclic NTP Update success (servers time.google.com)
Nov 17 17:49:02 FulCruM daemon.debug process_monitor[1730]: Restarting cron (time sync change)
Nov 17 17:49:02 FulCruM user.info : cron : daemon successfully stopped
Nov 17 17:49:02 FulCruM user.info : process_monitor : daemon successfully stopped
Nov 17 17:49:02 FulCruM user.info : process_monitor : successfully started
Nov 17 17:49:02 FulCruM daemon.debug process_monitor[1783]: We need to re-update after 3600 seconds
Nov 17 17:49:02 FulCruM daemon.info process_monitor[1783]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Nov 17 17:49:02 FulCruM user.info : cron : daemon successfully started
Nov 17 17:49:02 FulCruM cron.info cron[1787]: (CRON) STARTUP (fork ok)
Nov 17 17:49:04 FulCruM user.info : nas : start nas lan
Nov 17 17:49:04 FulCruM user.info : nas : start nas for wl0
Nov 17 17:49:04 FulCruM user.info : nas : NAS lan (wl0 interface) successfully started
Nov 17 17:49:04 FulCruM user.info : nas : start nas lan
Nov 17 17:49:04 FulCruM user.info : nas : start nas for wl1
Nov 17 17:49:04 FulCruM user.info : nas : NAS lan (wl1 interface) successfully started
Nov 17 17:49:04 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:49:04 FulCruM daemon.info httpd[1269]: httpd : httpd server shutdown
Nov 17 17:49:04 FulCruM daemon.info httpd[1338]: httpd : httpd server shutdown
Nov 17 17:49:04 FulCruM daemon.info httpd[1821]: httpd : httpd server started at port 80
Nov 17 17:49:04 FulCruM daemon.info httpd[1823]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:49:04 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:49:04 FulCruM user.info : resetbutton : daemon successfully stopped
Nov 17 17:49:04 FulCruM user.info : resetbutton : resetbutton daemon successfully started
Nov 17 17:49:04 FulCruM user.info : Reinitialize Wifi0
Nov 17 17:49:10 FulCruM user.info : Reinitialize Wifi1
Nov 17 17:49:12 FulCruM user.debug : ttraff: data collection started
Nov 17 17:50:17 FulCruM user.info : cron : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : wland : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : klogd : kernel log daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 17:50:17 FulCruM kern.notice kernel: klogd: exiting
Nov 1
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Sat Nov 17, 2018 19:39    Post subject: Reply with quote
Here is the rest of the 5) cat /var/log/messages
Nov 17 17:49:02 FulCruM daemon.info ntpclient[1731]: Time set from time.google.com [216.239.35.0].
Nov 17 17:49:02 FulCruM daemon.info process_monitor[1730]: cyclic NTP Update success (servers time.google.com)
Nov 17 17:49:02 FulCruM daemon.debug process_monitor[1730]: Restarting cron (time sync change)
Nov 17 17:49:02 FulCruM user.info : cron : daemon successfully stopped
Nov 17 17:49:02 FulCruM user.info : process_monitor : daemon successfully stopped
Nov 17 17:49:02 FulCruM user.info : process_monitor : successfully started
Nov 17 17:49:02 FulCruM daemon.debug process_monitor[1783]: We need to re-update after 3600 seconds
Nov 17 17:49:02 FulCruM daemon.info process_monitor[1783]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Nov 17 17:49:02 FulCruM user.info : cron : daemon successfully started
Nov 17 17:49:02 FulCruM cron.info cron[1787]: (CRON) STARTUP (fork ok)
Nov 17 17:49:04 FulCruM user.info : nas : start nas lan
Nov 17 17:49:04 FulCruM user.info : nas : start nas for wl0
Nov 17 17:49:04 FulCruM user.info : nas : NAS lan (wl0 interface) successfully started
Nov 17 17:49:04 FulCruM user.info : nas : start nas lan
Nov 17 17:49:04 FulCruM user.info : nas : start nas for wl1
Nov 17 17:49:04 FulCruM user.info : nas : NAS lan (wl1 interface) successfully started
Nov 17 17:49:04 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:49:04 FulCruM daemon.info httpd[1269]: httpd : httpd server shutdown
Nov 17 17:49:04 FulCruM daemon.info httpd[1338]: httpd : httpd server shutdown
Nov 17 17:49:04 FulCruM daemon.info httpd[1821]: httpd : httpd server started at port 80
Nov 17 17:49:04 FulCruM daemon.info httpd[1823]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:49:04 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:49:04 FulCruM user.info : resetbutton : daemon successfully stopped
Nov 17 17:49:04 FulCruM user.info : resetbutton : resetbutton daemon successfully started
Nov 17 17:49:04 FulCruM user.info : Reinitialize Wifi0
Nov 17 17:49:10 FulCruM user.info : Reinitialize Wifi1
Nov 17 17:49:12 FulCruM user.debug : ttraff: data collection started
Nov 17 17:50:17 FulCruM user.info : cron : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : wland : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : klogd : kernel log daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:50:17 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 17:50:17 FulCruM kern.notice kernel: klogd: exiting
Nov 17 17:50:17 FulCruM kern.notice kernel: klogd: exiting
Nov 17 17:50:17 FulCruM user.info : pptpd : daemon successfully stopped
Nov 17 17:50:17 FulCruM daemon.warn radvd[1728]: exiting, 1 sigterm(s) received
Nov 17 17:50:17 FulCruM daemon.info radvd[1728]: sending stop adverts
Nov 17 17:50:17 FulCruM daemon.info radvd[1728]: removing /var/run/radvd.pid
Nov 17 17:50:17 FulCruM daemon.info radvd[1728]: returning from radvd main
Nov 17 17:50:17 FulCruM user.info : syslogd : syslog daemon successfully stopped
Nov 17 13:50:17 FulCruM syslog.info syslogd exiting
Nov 17 13:50:17 FulCruM syslog.info syslogd exiting
Nov 17 13:50:39 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Nov 17 17:50:39 FulCruM user.info : klogd : daemon successfully started
Nov 17 17:50:39 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Nov 17 17:50:39 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 3(eth2) entered disabled state
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 2(eth1) entered disabled state
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 1(vlan1) entered disabled state
Nov 17 17:50:39 FulCruM kern.warn kernel: Hooks already unregistered
Nov 17 17:50:39 FulCruM kern.warn kernel: Hooks already unregistered
Nov 17 17:50:39 FulCruM kern.info kernel: device eth2 left promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 3(eth2) entered disabled state
Nov 17 17:50:39 FulCruM kern.info kernel: device eth1 left promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 2(eth1) entered disabled state
Nov 17 17:50:39 FulCruM kern.info kernel: device vlan1 left promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: device eth0 left promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 1(vlan1) entered disabled state
Nov 17 17:50:39 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:50:39 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:50:39 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:50:39 FulCruM kern.info kernel: mip6: Mobile IPv6
Nov 17 17:50:39 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
Nov 17 17:50:39 FulCruM kern.info kernel: device br0 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: device vlan1 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: device eth0 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: device eth1 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: device eth2 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:50:39 FulCruM kern.info kernel: device br0 left promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: device br0 entered promiscuous mode
Nov 17 17:50:39 FulCruM kern.info kernel: device br0 left promiscuous mode
Nov 17 17:50:39 FulCruM daemon.info radvd[2550]: version 2.17 started
Nov 17 17:50:39 FulCruM daemon.warn radvd[2550]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Nov 17 17:50:39 FulCruM user.info : radvd : RADVD daemon successfully started
Nov 17 17:50:39 FulCruM user.info : syslogd : daemon successfully started
Nov 17 17:50:39 FulCruM user.info : klogd : daemon successfully started
Nov 17 13:50:39 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Nov 17 17:50:39 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Nov 17 17:50:39 FulCruM user.info : nstxd : daemon successfully started
Nov 17 17:50:39 FulCruM kern.info kernel: device vlan2 entered promiscuous mode
Nov 17 17:50:39 FulCruM user.info : wland : daemon successfully started
Nov 17 17:50:39 FulCruM user.info : cron : daemon successfully started
Nov 17 17:50:39 FulCruM user.info : dnsmasq : daemon successfully started
Nov 17 17:50:39 FulCruM cron.info cron[2575]: (CRON) STARTUP (fork ok)
Nov 17 17:50:39 FulCruM kern.info kernel: IMQ: use 2 as queue number
Nov 17 17:50:39 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Nov 17 17:50:39 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Nov 17 17:50:39 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Nov 17 17:50:39 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:50:40 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:50:40 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:50:40 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:50:40 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:50:40 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:50:40 FulCruM kern.info kernel: device vlan2 left promiscuous mode
Nov 17 17:50:40 FulCruM user.info : ttraff : traffic counter daemon successfully started
Nov 17 17:50:40 FulCruM user.debug : ttraff: data collection started
Nov 17 17:50:40 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:50:41 FulCruM user.info : dhcp6c : daemon successfully stopped
Nov 17 17:50:41 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:50:41 FulCruM user.info : dnsmasq : daemon successfully started
Nov 17 17:50:41 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:50:41 FulCruM daemon.info httpd[1826]: httpd : httpd server shutdown
Nov 17 17:50:41 FulCruM daemon.info httpd[1824]: httpd : httpd server shutdown
Nov 17 17:50:41 FulCruM daemon.info httpd[2927]: httpd : httpd server started at port 80
Nov 17 17:50:41 FulCruM daemon.info httpd[2930]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:50:41 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:50:41 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:50:41 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:50:42 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:50:42 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:50:42 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:50:43 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:50:43 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:50:43 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:50:43 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:50:43 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:50:43 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Nov 17 17:50:44 FulCruM user.info : wland : daemon successfully stopped
Nov 17 17:50:44 FulCruM kern.info kernel: IMQ: use 2 as queue number
Nov 17 17:50:44 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Nov 17 17:50:44 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Nov 17 17:50:44 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Nov 17 17:50:45 FulCruM user.info : wland : daemon successfully started
Nov 17 17:50:45 FulCruM user.info : wan : WAN is up. IP: 333.333.3.33
Nov 17 17:50:45 FulCruM user.info : scc : speedchecker successfully stopped
Nov 17 17:50:45 FulCruM user.info : speedchecker : client started
Nov 17 17:50:45 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 17:50:45 FulCruM daemon.warn radvd[2551]: exiting, 1 sigterm(s) received
Nov 17 17:50:45 FulCruM daemon.info radvd[2551]: sending stop adverts
Nov 17 17:50:45 FulCruM daemon.info radvd[2551]: removing /var/run/radvd.pid
Nov 17 17:50:45 FulCruM daemon.info radvd[2551]: returning from radvd main
Nov 17 17:50:45 FulCruM daemon.info radvd[3408]: version 2.17 started
Nov 17 17:50:45 FulCruM daemon.warn radvd[3408]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Nov 17 17:50:45 FulCruM user.info : radvd : RADVD daemon successfully started
Nov 17 17:50:45 FulCruM user.info : process_monitor : daemon successfully stopped
Nov 17 17:50:45 FulCruM user.info : process_monitor : successfully started
Nov 17 17:50:45 FulCruM user.info : scc : speedchecker successfully stopped
Nov 17 17:50:45 FulCruM user.info : speedchecker : client started
Nov 17 17:50:45 FulCruM daemon.debug ntpclient[3412]: Connecting to time.google.com [216.239.35.12] ...
Nov 17 17:50:45 FulCruM daemon.info ntpclient[3412]: Time set from time.google.com [216.239.35.12].
Nov 17 17:50:45 FulCruM daemon.info process_monitor[3411]: cyclic NTP Update success (servers time.google.com)
Nov 17 17:50:45 FulCruM daemon.debug process_monitor[3411]: We need to re-update after 3600 seconds
Nov 17 17:50:45 FulCruM daemon.info process_monitor[3411]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Nov 17 17:50:47 FulCruM user.info : nas : start nas lan
Nov 17 17:50:47 FulCruM user.info : nas : start nas for wl0
Nov 17 17:50:47 FulCruM user.info : nas : NAS lan (wl0 interface) successfully started
Nov 17 17:50:47 FulCruM user.info : nas : start nas lan
Nov 17 17:50:47 FulCruM user.info : nas : start nas for wl1
Nov 17 17:50:47 FulCruM user.info : nas : NAS lan (wl1 interface) successfully started
Nov 17 17:50:47 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:50:47 FulCruM daemon.info httpd[2935]: httpd : httpd server shutdown
Nov 17 17:50:47 FulCruM daemon.info httpd[2931]: httpd : httpd server shutdown
Nov 17 17:50:47 FulCruM daemon.info httpd[3449]: httpd : httpd server started at port 80
Nov 17 17:50:47 FulCruM daemon.info httpd[3451]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:50:47 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:50:47 FulCruM user.info : resetbutton : daemon successfully stopped
Nov 17 17:50:47 FulCruM user.info : resetbutton : resetbutton daemon successfully started
Nov 17 17:50:47 FulCruM user.info : Reinitialize Wifi0
Nov 17 17:50:53 FulCruM user.info : Reinitialize Wifi1
Nov 17 17:52:25 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 17:52:25 FulCruM user.info : cron : daemon successfully stopped
Nov 17 17:52:25 FulCruM user.info : klogd : kernel log daemon successfully stopped
Nov 17 17:52:25 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:52:25 FulCruM user.info : wland : daemon successfully stopped
Nov 17 17:52:25 FulCruM daemon.warn radvd[3409]: exiting, 1 sigterm(s) received
Nov 17 17:52:25 FulCruM daemon.info radvd[3409]: sending stop adverts
Nov 17 17:52:25 FulCruM daemon.info radvd[3409]: removing /var/run/radvd.pid
Nov 17 17:52:25 FulCruM daemon.info radvd[3409]: returning from radvd main
Nov 17 17:52:25 FulCruM kern.notice kernel: klogd: exiting
Nov 17 17:52:25 FulCruM user.info : pptpd : daemon successfully stopped
Nov 17 17:52:25 FulCruM kern.notice kernel: klogd: exiting
Nov 17 17:52:25 FulCruM user.info : syslogd : syslog daemon successfully stopped
Nov 17 13:52:25 FulCruM syslog.info syslogd exiting
Nov 17 13:52:25 FulCruM syslog.info syslogd exiting
Nov 17 13:52:47 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Nov 17 17:52:47 FulCruM user.info : klogd : daemon successfully started
Nov 17 17:52:47 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Nov 17 17:52:47 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 3(eth2) entered disabled state
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 2(eth1) entered disabled state
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 1(vlan1) entered disabled state
Nov 17 17:52:47 FulCruM kern.warn kernel: Hooks already unregistered
Nov 17 17:52:47 FulCruM kern.warn kernel: Hooks already unregistered
Nov 17 17:52:47 FulCruM kern.info kernel: device eth2 left promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 3(eth2) entered disabled state
Nov 17 17:52:47 FulCruM kern.info kernel: device eth1 left promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 2(eth1) entered disabled state
Nov 17 17:52:47 FulCruM kern.info kernel: device vlan1 left promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: device eth0 left promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 1(vlan1) entered disabled state
Nov 17 17:52:47 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:52:47 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:52:47 FulCruM kern.warn kernel: Interface br0 doesn't exist
Nov 17 17:52:47 FulCruM kern.info kernel: mip6: Mobile IPv6
Nov 17 17:52:47 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
Nov 17 17:52:47 FulCruM kern.info kernel: device br0 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: device vlan1 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: device eth0 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 1(vlan1) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: device eth1 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: device eth2 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:52:47 FulCruM kern.info kernel: device br0 left promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: device br0 entered promiscuous mode
Nov 17 17:52:47 FulCruM kern.info kernel: device br0 left promiscuous mode
Nov 17 17:52:47 FulCruM user.info : syslogd : daemon successfully started
Nov 17 13:52:47 FulCruM syslog.info syslogd started: BusyBox v1.29.3
Nov 17 17:52:47 FulCruM user.info : wland : daemon successfully started
Nov 17 17:52:47 FulCruM user.info : nstxd : daemon successfully started
Nov 17 17:52:47 FulCruM user.info : klogd : daemon successfully started
Nov 17 17:52:47 FulCruM user.info : dnsmasq : daemon successfully started
Nov 17 17:52:47 FulCruM kern.notice kernel: klogd started: BusyBox v1.29.3 (2018-11-17 06:20:33 GMT)
Nov 17 17:52:47 FulCruM kern.info kernel: device vlan2 entered promiscuous mode
Nov 17 17:52:47 FulCruM daemon.info radvd[4030]: version 2.17 started
Nov 17 17:52:47 FulCruM daemon.warn radvd[4030]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Nov 17 17:52:47 FulCruM user.info : radvd : RADVD daemon successfully started
Nov 17 17:52:47 FulCruM kern.info kernel: IMQ: use 2 as queue number
Nov 17 17:52:47 FulCruM user.info : cron : daemon successfully started
Nov 17 17:52:47 FulCruM cron.info cron[4059]: (CRON) STARTUP (fork ok)
Nov 17 17:52:47 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Nov 17 17:52:47 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Nov 17 17:52:47 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Nov 17 17:52:48 FulCruM kern.info kernel: br0: port 2(eth1) entered forwarding state
Nov 17 17:52:48 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:52:48 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:52:48 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:52:48 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:52:48 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:52:49 FulCruM kern.info kernel: device vlan2 left promiscuous mode
Nov 17 17:52:49 FulCruM user.info : ttraff : traffic counter daemon successfully started
Nov 17 17:52:49 FulCruM user.debug : ttraff: data collection started
Nov 17 17:52:49 FulCruM kern.info kernel: br0: port 3(eth2) entered forwarding state
Nov 17 17:52:49 FulCruM user.info : dhcp6c : daemon successfully stopped
Nov 17 17:52:49 FulCruM user.info : dnsmasq : daemon successfully stopped
Nov 17 17:52:49 FulCruM user.info : dnsmasq : daemon successfully started
Nov 17 17:52:49 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:52:49 FulCruM daemon.info httpd[3454]: httpd : httpd server shutdown
Nov 17 17:52:49 FulCruM daemon.info httpd[3452]: httpd : httpd server shutdown
Nov 17 17:52:49 FulCruM daemon.info httpd[4408]: httpd : httpd server started at port 80
Nov 17 17:52:49 FulCruM daemon.info httpd[4412]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:52:49 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:52:50 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:52:50 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:52:50 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:52:50 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:52:50 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:52:51 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 17:52:51 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 17:52:51 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 17:52:51 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 17:52:51 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 17:52:52 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Nov 17 17:52:52 FulCruM user.info : wland : daemon successfully stopped
Nov 17 17:52:52 FulCruM kern.info kernel: IMQ: use 2 as queue number
Nov 17 17:52:52 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Nov 17 17:52:52 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Nov 17 17:52:52 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Nov 17 17:52:53 FulCruM user.info : wland : daemon successfully started
Nov 17 17:52:53 FulCruM user.info : wan : WAN is up. IP: 333.333.3.33
Nov 17 17:52:53 FulCruM user.info : scc : speedchecker successfully stopped
Nov 17 17:52:53 FulCruM user.info : speedchecker : client started
Nov 17 17:52:53 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 17:52:53 FulCruM daemon.warn radvd[4052]: exiting, 1 sigterm(s) received
Nov 17 17:52:53 FulCruM daemon.info radvd[4052]: sending stop adverts
Nov 17 17:52:53 FulCruM daemon.info radvd[4052]: removing /var/run/radvd.pid
Nov 17 17:52:53 FulCruM daemon.info radvd[4052]: returning from radvd main
Nov 17 17:52:53 FulCruM daemon.info radvd[4887]: version 2.17 started
Nov 17 17:52:53 FulCruM daemon.warn radvd[4887]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Nov 17 17:52:53 FulCruM user.info : radvd : RADVD daemon successfully started
Nov 17 17:52:53 FulCruM user.info : process_monitor : daemon successfully stopped
Nov 17 17:52:53 FulCruM user.info : process_monitor : successfully started
Nov 17 17:52:53 FulCruM user.info : scc : speedchecker successfully stopped
Nov 17 17:52:53 FulCruM daemon.debug ntpclient[4891]: Connecting to time.google.com [216.239.35.0] ...
Nov 17 17:52:53 FulCruM user.info : speedchecker : client started
Nov 17 17:52:53 FulCruM daemon.info ntpclient[4891]: Time set from time.google.com [216.239.35.0].
Nov 17 17:52:53 FulCruM daemon.info process_monitor[4890]: cyclic NTP Update success (servers time.google.com)
Nov 17 17:52:53 FulCruM daemon.debug process_monitor[4890]: We need to re-update after 3600 seconds
Nov 17 17:52:53 FulCruM daemon.info process_monitor[4890]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Nov 17 17:52:56 FulCruM user.info : nas : start nas lan
Nov 17 17:52:56 FulCruM user.info : nas : start nas for wl0
Nov 17 17:52:56 FulCruM user.info : nas : NAS lan (wl0 interface) successfully started
Nov 17 17:52:56 FulCruM user.info : nas : start nas lan
Nov 17 17:52:56 FulCruM user.info : nas : start nas for wl1
Nov 17 17:52:56 FulCruM user.info : nas : NAS lan (wl1 interface) successfully started
Nov 17 17:52:56 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 17:52:56 FulCruM daemon.info httpd[4417]: httpd : httpd server shutdown
Nov 17 17:52:56 FulCruM daemon.info httpd[4413]: httpd : httpd server shutdown
Nov 17 17:52:56 FulCruM daemon.info httpd[4929]: httpd : httpd server started at port 80
Nov 17 17:52:56 FulCruM daemon.info httpd[4932]: httpd : httpd server (ssl support) started at port 443
Nov 17 17:52:56 FulCruM user.info : httpd : https daemon successfully started
Nov 17 17:52:56 FulCruM user.info : resetbutton : daemon successfully stopped
Nov 17 17:52:56 FulCruM user.info : resetbutton : resetbutton daemon successfully started
Nov 17 17:52:56 FulCruM user.info : Reinitialize Wifi0
Nov 17 17:53:02 FulCruM user.info : Reinitialize Wifi1
Nov 17 18:21:27 FulCruM kern.info kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Nov 17 18:52:53 FulCruM daemon.debug ntpclient[5397]: Connecting to time.google.com [216.239.35.8] ...
Nov 17 18:52:53 FulCruM daemon.info ntpclient[5397]: Time set from time.google.com [216.239.35.8].
Nov 17 18:52:53 FulCruM daemon.info process_monitor[4890]: cyclic NTP Update success (servers time.google.com)
Nov 17 18:54:58 FulCruM daemon.info httpd[4931]: httpd : Authentication fail
Nov 17 18:54:58 FulCruM daemon.err httpd[4931]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Nov 17 19:04:52 FulCruM user.info : nas : daemon successfully stopped
Nov 17 19:04:52 FulCruM user.info : cron : daemon successfully stopped
Nov 17 19:04:53 FulCruM user.info : ipv6 : successfully stopped
Nov 17 19:04:54 FulCruM user.info : nas : daemon hanging, send SIGKILL
Nov 17 19:04:54 FulCruM user.info : radvd : daemon successfully stopped
Nov 17 19:04:54 FulCruM user.info : pptpd : daemon successfully stopped
Nov 17 19:04:54 FulCruM daemon.warn radvd[4888]: exiting, 1 sigterm(s) received
Nov 17 19:04:54 FulCruM daemon.info radvd[4888]: sending stop adverts
Nov 17 19:04:54 FulCruM daemon.info radvd[4888]: removing /var/run/radvd.pid
Nov 17 19:04:54 FulCruM daemon.info radvd[4888]: returning from radvd main
Nov 17 19:04:54 FulCruM user.info : cron : daemon successfully started
Nov 17 19:04:54 FulCruM cron.info cron[5754]: (CRON) STARTUP (fork ok)
Nov 17 19:04:54 FulCruM daemon.info radvd[5759]: version 2.17 started
Nov 17 19:04:54 FulCruM daemon.warn radvd[5759]: invalid all-zeros prefix in /tmp/radvd.conf, line 11
Nov 17 19:04:54 FulCruM user.info : radvd : RADVD daemon successfully started
Nov 17 19:04:54 FulCruM kern.info kernel: mip6: Mobile IPv6
Nov 17 19:04:55 FulCruM user.info : ipv6 : successfully started
Nov 17 19:04:55 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 19:04:55 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 19:04:55 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 19:04:55 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 19:04:55 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 19:04:56 FulCruM user.info : wland : daemon successfully stopped
Nov 17 19:04:56 FulCruM user.info : nas : start nas lan
Nov 17 19:04:56 FulCruM user.info : nas : start nas for wl0
Nov 17 19:04:56 FulCruM user.info : nas : NAS lan (wl0 interface) successfully started
Nov 17 19:04:56 FulCruM user.info : nas : start nas lan
Nov 17 19:04:56 FulCruM user.info : nas : start nas for wl1
Nov 17 19:04:56 FulCruM user.info : wland : daemon successfully started
Nov 17 19:04:56 FulCruM user.info : nas : NAS lan (wl1 interface) successfully started
Nov 17 19:04:57 FulCruM user.info : vpn modules : vpn modules successfully unloaded
Nov 17 19:04:57 FulCruM user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 19:04:57 FulCruM user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 19:04:57 FulCruM user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 19:04:57 FulCruM user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 19:04:57 FulCruM kern.info kernel: IMQ driver unloaded successfully.
Nov 17 19:04:57 FulCruM kern.info kernel: IMQ: use 2 as queue number
Nov 17 19:04:57 FulCruM kern.info kernel: IMQ driver loaded successfully. (numdevs = 2, numqueues = 2, imq_dev_accurate_stats = 1)
Nov 17 19:04:57 FulCruM kern.info kernel: Hooking IMQ before NAT on PREROUTING.
Nov 17 19:04:57 FulCruM kern.info kernel: Hooking IMQ after NAT on POSTROUTING.
Nov 17 19:04:58 FulCruM user.info : httpd : daemon successfully stopped
Nov 17 19:04:58 FulCruM daemon.info httpd[4934]: httpd : httpd server shutdown
Nov 17 19:04:58 FulCruM daemon.info httpd[4931]: httpd : httpd server shutdown
Nov 17 19:04:58 FulCruM daemon.info httpd[6158]: httpd : httpd server started at port 80
Nov 17 19:04:58 FulCruM daemon.info httpd[6162]: httpd : httpd server (ssl support) started at port 443
Nov 17 19:04:58 FulCruM user.info : httpd : https daemon successfully started
mitza97
DD-WRT User


Joined: 29 Dec 2011
Posts: 138

PostPosted: Sat Nov 17, 2018 21:14    Post subject: Reply with quote
@Brimmy: please, in the future DON'T SPAM this thread with your logs...keep them only for you.
Thanks for understanding!
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Sat Nov 17, 2018 22:01    Post subject: Reply with quote
What spam, these are things that were requested from previous build posters. I don't put them as attachments because i myself will not download an attachment because of the virus risk.
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 470

PostPosted: Sun Nov 18, 2018 0:34    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r37736 std ( 11/17/18 )
Kernel: Linux 4.4.163 #4178 SMP Fri Nov 16 09:11:15 GMT 2018 armv7l
Previous: r37582
Mode/Status: Gateway / working
Reset: no
Issues/Errors: None so far.

Uptime: 1h 48m
Temperatures: CPU 62.5 °C / WL0 45.8 °C / WL1 51.8 °C

kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8440
Location: Texas, USA

PostPosted: Sun Nov 18, 2018 2:37    Post subject: Linksys E4200 v1 Reply with quote
Router/Version:  Linksys E4200 v1
File: dd-wrt.v24-37736_NEWD-2_K3.x_mega-e4200.bin
Firmware:  DD-WRT v3.0-r37736 mega ( 11/17/18 )
Kernel:  Linux 3.10.108-d6 #21790 Sat Nov 17 12:22:05 GMT 2018 mips
Previous: DD-WRT v3.0-r37582 mega ( 11/03/18 )
Reset: No
Mode: Gateway/AP
Uptime: ~10:30 
Status: OK
Issues/Errors:

1. First big, HUGE thing. Kernel panic on reboot!! (see attached serial log)

2, Ongoing serial console error messages:
Code:

cannot open /dev/nvram
udevtrigger[746]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
/etc/preinit: line 44: can't create /proc/sys/net/ipv4/ip_conntrack_max: nonexistent directory
cannot open /proc/sys/net/ipv4/ip_conntrack_max
/etc/preinit: line 44: can't create /proc/sys/net/ipv4/ip_conntrack_max: nonexistent directory
cannot open /proc/sys/net/ipv4/ip_conntrack_max
/opt/etc/init.d/rcS: No such file or directory
/jffs/etc/init.d/rcS: No such file or directory
/mmc/etc/init.d/rcS: No such file or directory
/mnt/smbshare
cannot open /proc/sys/net/ipv4/conf/br0/loop
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
br0: received packet on eth2 with own address as source address


3. Syslog error messages:
Code:

# cat /var/log/messages | grep -i err
Jan  1 00:00:03 DD-WRT kern.err kernel: pflash: found no supported devices
Jan  1 00:00:03 DD-WRT kern.err kernel: brcmnand: found no supported devices
Jan  1 00:00:04 DD-WRT kern.err kernel: nflash: found no supported devices


4. The 5GHz band auto-connect issue seems to still be fixed/not fixed (sometimes it does, sometimes it doesn't), however the 5GHz band channel reset to “Auto” during upgrade and I had to reconfigure and apply settings because the 5Ghz band nvram variables went awry, I s'pose.

5. It seems that the radio timer issue is still a problem as far as gtk rekey interval. Seems that unused nvram configs for vifs/vaps on the 2.4 band were causing an issue, but not entirely sure. 

6. DNSMasq seems to be OK now.

7. Will continue to test and monitor, but some things are still not right in the K3X builds. Logs attached.



r37736.syslog.txt
 Description:

Download
 Filename:  r37736.syslog.txt
 Filesize:  17.5 KB
 Downloaded:  235 Time(s)


r37582_r37736.serial.txt
 Description:

Download
 Filename:  r37582_r37736.serial.txt
 Filesize:  31.32 KB
 Downloaded:  260 Time(s)

phlegmer
DD-WRT User


Joined: 14 Oct 2006
Posts: 285
Location: Sector 001

PostPosted: Sun Nov 18, 2018 4:35    Post subject: Reply with quote
VAP?
MolaMola
DD-WRT User


Joined: 07 Mar 2013
Posts: 63

PostPosted: Sun Nov 18, 2018 11:17    Post subject: Re: Linksys E4200 v1 Reply with quote
kernel-panic69 wrote:
The 5GHz band auto-connect issue seems to still be fixed/not fixed (sometimes it does, sometimes it doesn't), however the 5GHz band channel reset to “Auto” during upgrade and I had to reconfigure and apply settings because the 5Ghz band nvram variables went awry, I s'pose.

Are you referring to the issue where the 5GHz band is stuck in auto mode in certain situations? I hope BS fixes that in the near future.

Brimmy wrote:
What spam, these are things that were requested from previous build posters. I don't put them as attachments because i myself will not download an attachment because of the virus risk.

There are websites out there where you can easily publish any kind of code or text. Then you could just post the link here. If everyone would start doing what you did then I wouldn't want to browse these threads anymore. Apart from that, how would a text file be a virus risk?
@m0eb@
DD-WRT User


Joined: 26 Dec 2015
Posts: 289

PostPosted: Sun Nov 18, 2018 11:29    Post subject: Nice way to post a report... Reply with quote
kernel-panic69 wrote:
Router/Version:  Linksys E4200 v1
.
.
.
.
.
.


See the beautiful way Kernel-Panic has made his post. He has put Syslog in a different document and uploaded that as an attachment.

Great practice KP ... avoids a lot of panic. I will definitely follow this practice and recommend others to do the same.

_________________
PROFESSIONAL STUDENT
my.Mistakes my.Learning ... provided I have the patience & persistence to learn
mitza97
DD-WRT User


Joined: 29 Dec 2011
Posts: 138

PostPosted: Sun Nov 18, 2018 17:59    Post subject: Re: Nice way to post a report... Reply with quote
@m0eb@ wrote:
kernel-panic69 wrote:
Router/Version:  Linksys E4200 v1
.
.
.
.
.
.


See the beautiful way Kernel-Panic has made his post. He has put Syslog in a different document and uploaded that as an attachment.

Great practice KP ... avoids a lot of panic. I will definitely follow this practice and recommend others to do the same.

Yeah, certainly recommend the same thing to @Brimmy.
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 152

PostPosted: Sun Nov 18, 2018 19:02    Post subject: Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r37736 std ( 11/17/18 )
Kernel: Linux 4.4.163 #4182 Sat Nov 17 06:42:55 GMT 2018 armv7l
Previous: r37442
Reset: No
Mode/Status: gateway ap/working
Issues/Errors: Lan LEDs do not work and usual spam in syslog

Nov 18 18:10:22 router daemon.info httpd[1034]: httpd : Authentication fail
Nov 18 18:10:22 router daemon.err httpd[1034]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


Also noticed that ISP side gateway IP is now listed under LAN Active Clients (maked as red in screenshot).

Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum