Posted: Sat Oct 27, 2018 6:08 Post subject: PPPoe session successful but no internet
HI
I'M having problem with pppoe connection it show me it connected on dd-wrt panel but i don't have internet access neither on lan or wifi can anyone help tp solve it please
btw i'm using router Tp-link Archer C9
Firmware: DD-WRT v3.0-r37305
Was confused with this a couple of times. You can check and rule out these points before trying anything else.
1. ISP used a string in Basic Settings>>WAN setup>>>advanced Settings>>Service Name. I was not using this string. Once I put the string - I was online
2. ISP used MAC Address Filtering. The first logon would register the MAC address and after that the username and MAC address would have to match. I had configured first on my laptop and then moved the connection to the router, so MAC address changed. Called the ISP and asked them to reset my MAC - and all was fine (This would save the hassle of having to spoof the MAC each time I fiddled with router firmware)
Other than the above two - it could also be something in your firewall script that blocks internet. If problem persists, post some information about this aspect too. _________________ PROFESSIONAL STUDENT my.Mistakes ∝ my.Learning ... provided I have the patience & persistence to learn
no i didn't contact them because on different firmware or on another router with original firmware the internet is working fine only on dd-wrt is not working
Per Yngve Berg wrote:
Your screen-shot shows a private address, not public. Have you contacted your isp?
We are seeing similar symptoms on recent builds with both PPTP and PPPoE. It appears that the PPP client (which is common to PPTP and PPPoE) within the DD-WRT router may be crashing during the first connection attempt after the router boots. Developers, please investigate! I have packet dumps of failed and successful PPTP connections available if they'd be useful.
Last edited by Brett Glass on Sat Dec 01, 2018 4:54; edited 3 times in total
I would love to revert the affected routers to an earlier build of DD-WRT, but some of them are TL-WR940v6 routers, which were not supported until after the PPP bug surfaced. I'll have to pull all of these routers out of service until there's a fix, so I would greatly appreciate it if the developers could investigate this problem quickly.