Posted: Fri Oct 19, 2018 5:47 Post subject: WGET not working
Trying to install Entware. Doesn't work because WGET doesn't work.
Code:
root@Penny:~# cd /opt
root@Penny:/opt# wget http://bin.entware.net/mipssf-k3.4/installer/generic.sh
Connecting to bin.entware.net (81.4.123.217:80)
root@Penny:/opt#
Did some searching and some have stated that WGET echoes nothing when called these days. If that's the case, how do I know that it worked or that it didn't?
Otherwise, nobody seems to know what the issue is.
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Fri Oct 19, 2018 7:08 Post subject:
i do suspect this too as my adblockers are not working as intended but for some reason its very random not
on all my routers _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Fri Oct 19, 2018 15:58 Post subject: Re: WGET not working
Schmengie wrote:
Trying to install Entware. Doesn't work because WGET doesn't work.
Code:
root@Penny:~# cd /opt
root@Penny:/opt# wget http://bin.entware.net/mipssf-k3.4/installer/generic.sh
Connecting to bin.entware.net (81.4.123.217:80)
root@Penny:/opt#
Did some searching and some have stated that WGET echoes nothing when called these days. If that's the case, how do I know that it worked or that it didn't?
Otherwise, nobody seems to know what the issue is.
Having a similar issue, but no response from WGET.
Code:
root@Mr Routy:~# cd /opt
root@Mr Routy:/opt# wget http://bin.entware.net/mipssf-k3.4/installer/generic.sh
root@Mr Routy:/opt# sh generic.sh
sh: can't open 'generic.sh': No such file or directory
I fixed it on my end. As it turned out, there was either something wrong with the ext2 formatting on my USB volume or with the way it was mounted. I'm not sure which. I used my old Lubuntu build to reformat it again before plugging it back in to the router and ensuring that it mounted properly to /opt. WGET started to work again.
