Author
Message
Xanadu73 DD-WRT Novice Joined: 28 Aug 2016 Posts: 6
Posted: Mon Oct 15, 2018 12:16 Post subject: Netgear 6400 and ddup
Hey!
I'm just wondering if "ddup --flash-latest" is planned on being brought back to the Netgear 4600 or if this thing has reach some kind of End of Life with DD-WRT support. It looks like there's still images being released for it, so I'm not really sure what's preventing --flash-latest from seeing them.
Code: DD-WRT v3.0-r36070M kongac (c) 2018 NewMedia-NET GmbH
Release: 05/31/18
BusyBox v1.28.4 (2018-05-31 11:07:38 CEST) built-in shell (ash)
root@router:~# ddup --flash-latest
Auto update for the Netgear R6400 is currently not supported.
Last edited by Xanadu73 on Mon Oct 15, 2018 14:45; edited 1 time in total
Back to top
Sponsor
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12913 Location: Netherlands
Posted: Mon Oct 15, 2018 14:30 Post subject:
You can edit your post (it now says 4600 and you probably mean 6400)
My R6400v1 can still use DDUP but I am on Kong's latest test build already.
It could have something to do with the fact that the R6400 no longer exists.
It is either an R6400v1 or an R6400v2, so I expect that if you update manually to the latest test build (I am using it and it works fine) that it works from there on again. _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
Xanadu73 DD-WRT Novice Joined: 28 Aug 2016 Posts: 6
Posted: Tue Oct 16, 2018 12:14 Post subject:
Thanks for pointing out my typo. Fixed.
OK, so according to
Code: root@router:~# nvram get board_id
U12H332T00_NETGEAR
That would make my board the V1 (judging on what I can find in the forums). That would mean I want the webflash from here:
ftp://ftp.dd-wrt.com/betas/2018/10-10-2018-r37305/netgear-r6400/
?
M.
Back to top
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12913 Location: Netherlands
Posted: Tue Oct 16, 2018 12:23 Post subject:
To be sure check underside of the router, v2 has R6400v2 on it.
You can use the directory you mentioned, but that is a BrainSlayer version, I would use Kong's (only he has the DDUP): http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/
R6400 (both v1 and v2) take the following file:
dd-wrt.v24-K3_AC_ARM_STD_128K .bin
Just as a precaution, reset to defaults before flashing.
Upgrade by using the GUI do not reset.
After upgrading telnet to your router and do:
Put settings in manually never restore from a backup _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
Xanadu73 DD-WRT Novice Joined: 28 Aug 2016 Posts: 6
Posted: Tue Oct 16, 2018 12:28 Post subject:
Ah poop. You're right. I did link to the "wrong" version (BS vs Kong). Again, thanks for pointing out my goof...
Thank you!
M.
Back to top