Reverted back to r37012 on WRT1200ac v1 with no reset, no issues.
No OpenVPN client errors on r37012 other than the usual yellow "warning".
Got OpenVPN Client errors on r37139 but not on r37012 after reinstall. r37139 did connect to VPN server but took a while. Once connected it stayed connected.
Example of some errors in red that I have not seen before. Error groups of three with other log info between error sets.
20181005 10:37:29 N FRAG TTL expired i=2
20181005 10:37:29 N FRAG TTL expired i=5
20181005 10:37:29 N FRAG TTL expired i=22
20181005 13:39:33 N FRAG TTL expired i=7
20181005 13:47:56 N FRAG TTL expired i=6
20181005 14:04:12 N FRAG TTL expired i=19
20181005 17:38:03 N FRAG TTL expired i=24
20181005 18:18:30 N FRAG TTL expired i=8
20181005 18:21:25 N FRAG TTL expired i=1
More red errors, one right after the other . .
Oct 5 22:30:42 router daemon.err openvpn[1615]: write UDPv4: Network unreachable (code=101)
Oct 5 22:30:42 router daemon.err openvpn[1615]: write UDPv4: Network unreachable (code=101)
Posted: Sat Oct 06, 2018 14:08 Post subject: Re: Zebra service ?
There are some routing options in the advanced routing setup but if we don't use the advanced routing on our router, dd-wrt should not start the zebra service!
dyilmaz wrote:
I wonder why the zebra service turned on by default if we don't use BGP or OSPF routing protocol on our routers.
I installed r37139-2018.October.04 on my WRT1900ACS_v1 as flash upgrade keeping my configs without issues. I used the Edge browser for the upgrade. I'll keep an eye out for any iPhoneX connection issues, etc. So far, everything seems to be working fine. I'll report if I hit any.
DD-WRT config reference for my WRT1900ACS_v1: wired devices ~75, wireless ~20 clients using 5GHz-80Mhz-AC-Only & 2.4GHz-20Mhz-NG-Mixed with 2 additional APs in house (D-Link DAP-1650 - same SSID/Config, non-overlapping channels), IPv6 on, DHCP reservations for all known devices, local Raspberry Pi NTP, access rules (internet block security cameras), port forwards, no QOS, running OpenVPN server, firewall rules (OpenVPN & Guest), Guest 2.4GHz Wi-Fi segmented network/DHCP
_________________
Router: Linksys WRT1900ACS_v1 (Marvell Armada 385)
Firmware: DD-WRT v3.0-r37139 std 10/04/18
Cable Modem: Motorola MB7420
ISP: Comcast (250 Mbps down | 10 Mbps up)
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
You're right, it doesn't work. Ticket 6453 was submitted to get that fixed. _________________ Linksys WRT3200ACM
Currently using Linksys Firmware until DDWRT lets my ObiTalk 202 complete calls when connected via WiFi
Last used DD-WRT Version: r38326
OpenVPN server