New (KONG) Test Build - 10/03/2018

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1305

PostPosted: Wed Oct 03, 2018 12:18    Post subject: New (KONG) Test Build - 10/03/2018 Reply with quote
New (KONG) Test Build - 10/03/2018

k4.9 - http://desipro.de/ddwrt/K3-AC-IPQ806X/Test/
k3.18 - http://desipro.de/ddwrt/K3-AC-IPQ806X/Test-3.18/

jerrytouille wrote:
Btw the 3.18 and 4.9 builds are flipped in the folders for the r7500v2 ie. the test-3.18 folder is actually 4.9 build, and test is 3.18


Please report errors on this topic.


Release Notes:
http://svn.dd-wrt.com/timeline (with a grain of salt, kong doesnt always add all commits)


Router Model:

Status:
Reset:
Errors:


Last edited by jerrytouille on Thu Oct 04, 2018 11:05; edited 2 times in total
Sponsor
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed Oct 03, 2018 12:32    Post subject: Re: New (KONG) Test Build - 10/03/2018 Reply with quote
jerrytouille wrote:
New (KONG) Test Build - 10/03/2018

http://desipro.de/ddwrt/K3-AC-IPQ806X/Test/

Please report errors on this topic.


Release Notes:
http://svn.dd-wrt.com/timeline (with a grain of salt, kong doesnt always add all commits)


Router Model:

Status:
Reset:
Errors:


3.18 builds will follow, for those that think they need a 3.18 build:-)
Most people probably won't have any issues with 4.9. 3.18 has a known issue where clients that connect to the router via ipsec cannot reach wan.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5012
Location: Texas

PostPosted: Wed Oct 03, 2018 13:18    Post subject: Reply with quote
Linksys EA8500
DD-WRT v3.0-r37120M kongat 10/03/18
Linux 4.9.130 #205 SMP PREEMPT Wed Oct 3 11:51:42 CEST 2018 armv7l

GUI install over a BS build.
main router
samba share
unbound
HTB FQ_CODEL
VLAN on port 4 + ath0.1 + ath1.1 via br1
29 static leases...4 which are leases on the br1 network
ovpn server
All appears to be worky very well

http://www.dslreports.com/speedtest/39817310
http://www.dslreports.com/speedtest/39817422

and
from http://www.dslreports.com/tools/puma6
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1305

PostPosted: Wed Oct 03, 2018 14:17    Post subject: Reply with quote
Router ModelNetgear R7500v2
Firmware Version DD-WRT v3.0-r37120M kongat (10/03/18 )
Kernel VersionLinux 4.9.130 #204 SMP PREEMPT Wed Oct 3 11:32:49 CEST 2018

Just flashed, no reset, dnssec still failed, QoS still behind 3.18
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1305

PostPosted: Wed Oct 03, 2018 14:45    Post subject: Re: New (KONG) Test Build - 10/03/2018 Reply with quote
<Kong> wrote:
3.18 builds will follow, for those that think they need a 3.18 build:-)
Most people probably won't have any issues with 4.9. 3.18 has a known issue where clients that connect to the router via ipsec cannot reach wan.


The file for 3.18 build of the r7500v2 is exactly the same as 4.9. md5 checked
labrok
DD-WRT User


Joined: 11 Feb 2011
Posts: 263
Location: Greece

PostPosted: Wed Oct 03, 2018 16:36    Post subject: Linksys EA-8500 Reply with quote
Has anyone tried the EA-8500 firmware under load? is it stable? wifi @ >161 with LL channel is working? last one under cpu load was crashing and needed powercycling the router.
htismaqe
DD-WRT User


Joined: 05 Nov 2015
Posts: 471

PostPosted: Wed Oct 03, 2018 19:19    Post subject: Re: New (KONG) Test Build - 10/03/2018 Reply with quote
I just now updated to r37015. What are the compelling changes in this new version?

<Kong> wrote:
jerrytouille wrote:
New (KONG) Test Build - 10/03/2018

http://desipro.de/ddwrt/K3-AC-IPQ806X/Test/

Please report errors on this topic.


Release Notes:
http://svn.dd-wrt.com/timeline (with a grain of salt, kong doesnt always add all commits)


Router Model:

Status:
Reset:
Errors:


3.18 builds will follow, for those that think they need a 3.18 build:-)
Most people probably won't have any issues with 4.9. 3.18 has a known issue where clients that connect to the router via ipsec cannot reach wan.

_________________
Routing:.......Asus RT-AX88U (Asuswrt-Merlin 384.14)
Switching:....Netgear GS608_V3 & GS605_V4, TrendNet TEG-S82G & TEG-S50G
av1shay
DD-WRT Novice


Joined: 26 Jun 2006
Posts: 24

PostPosted: Wed Oct 03, 2018 19:38    Post subject: Reply with quote
Hello all
just installed latest "TEST" build 37120M
Router Model:EA8500
Status: running
Reset: NO
Errors: CPU speed show 800/800 (should be 1.4ghz?)

Thanks
avishay

_________________
active:
linksys ea6500 (dd-wrt)
linksys ea6700 (vortex CFE, adv.Tomato)
linksys ea8500 (Kong)
---/
RIP:
dir-320 *2, bs 15279
wrt54g v3.1, eko 13491
dir-615, bs 17201
tl-wr1043nd, bs 16785
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7238
Location: YWG, Canada

PostPosted: Wed Oct 03, 2018 19:46    Post subject: Reply with quote
av1shay wrote:
Errors: CPU speed show 800/800 (should be 1.4ghz?)


not an error see how it changes, put it under load speedtest itll rise

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150 ------------> DD-WRT v3.0-r42490 std
[QUALCOMM] R7800 ------------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] WNDR4300 v1 --------> DD-WRT v3.0-r42514 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 ----------> DD-WRT v3.0-r42294 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7274
Location: Columbus, Ohio

PostPosted: Wed Oct 03, 2018 19:51    Post subject: Reply with quote
Working fine on my r7800

Linux 4.9.130 #206 SMP PREEMPT Wed Oct 3 13:01:23 CEST 2018 armv7l
HTB FQ_CODEL

_________________
I am far from a guru, I'm barely a novice.
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1305

PostPosted: Wed Oct 03, 2018 19:59    Post subject: Reply with quote
Router ModelNetgear R7500v2
Firmware Version DD-WRT v3.0-r37120M kongat (10/03/18 )
Kernel VersionLinux 3.18.123 #353 SMP PREEMPT Wed Oct 3 14:35:59 CEST 2018

dnssec still failed. QoS back to 3.18 awesomeness. Btw the 3.18 and 4.9 builds are flipped in the folders for the r7500v2 ie. the test-3.18 folder is actually 4.9 build, and test is 3.18
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1363
Location: Indiana

PostPosted: Wed Oct 03, 2018 20:22    Post subject: Reply with quote
jerrytouille wrote:
Btw the 3.18 and 4.9 builds are flipped in the folders for the r7500v2 ie. the test-3.18 folder is actually 4.9 build, and test is 3.18

What do you get with ddup if anything? I cannot test right now.

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 r42410 std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM AP
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7238
Location: YWG, Canada

PostPosted: Wed Oct 03, 2018 20:39    Post subject: Reply with quote
Router Model: r7800

Status k3.18: it runs, highspeed qos latency is normal
Status k4.9: qos latency bad, abnormally high cpu qos load
Reset: no/yes (restored after yes did nothing)
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5279
https://svn.dd-wrt.com/ticket/5600
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5699
https://svn.dd-wrt.com/ticket/5845
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5875
https://svn.dd-wrt.com/ticket/5933
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6036
https://svn.dd-wrt.com/ticket/6059
https://svn.dd-wrt.com/ticket/6115 *
https://svn.dd-wrt.com/ticket/6214
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6451

included tickets are only those affecting r7800 and kong build only.


both kernels: still cant remove hostapd entries from wifi security config box, only nvram wipe removes them. multicast_to_unicast=0 works to disable it and go back to using multicast which still appears fixed so far..

both kernels: jffs2 usage is wrong, i have a 11.6 MB ad/track/etc block file, jffs says 23.96 MB / 19.58 MB.

both kernels: wpa3 is missing on both radios.


k4.9, for some reason eth1 affinity defaults to core 1, have to move it back to core 0, or move wan to core 1 (both must be on the same core), to prevent high *LAN* latency spikes to the router when under heavy torrent/p2p load when both down/uploads are maxed. local latency to router spikes over 45ms, when both affinities same core, spikes are <12ms. this is on all builds both kernels, 3.18 just defaults all affinities to core 0.

k4.9, qos bad still. im now convinced if/once cpu qos load issue is fixed, the latency will be too. there is still abnormal cpu load with all qos configs on k4.9. idle time @ 155mbps is 0.0% on the core with wan regardless how much i spread affinities. this is with htb+pie which is the least on cpu. k3.18 idle time is 6.5~7%, i think the problem is in there. hfsc is harder than htb on cpu, no wonder its throughput on k4.9 is a slug. cpu load issue seems fixed for all other loads except qos.


k4.9 htb+pie default affinity https://www.dslreports.com/speedtest/39836402
k4.9 htb+pie all affinity core 0 https://www.dslreports.com/speedtest/39836525
k4.9 htb+fq_codel https://www.dslreports.com/speedtest/39836724
k4.9 hfsc+codel (not fq) https://www.dslreports.com/speedtest/39836790


k3.18 htb+pie default affinity all core 0 https://www.dslreports.com/speedtest/39837501
k3.18 htb+pie (https) https://www.dslreports.com/speedtest/39839720


all routers/builds/tests i do have /proc/sys/net/ipv4/tcp_slow_start_after_idle at 0 from now on. no other tweaks. is the latest board-2.bin included?

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150 ------------> DD-WRT v3.0-r42490 std
[QUALCOMM] R7800 ------------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] WNDR4300 v1 --------> DD-WRT v3.0-r42514 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 ----------> DD-WRT v3.0-r42294 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1363
Location: Indiana

PostPosted: Wed Oct 03, 2018 21:18    Post subject: Reply with quote
r7500v2
Firmware Version DD-WRT v3.0-r37120M kongat (10/03/18 )
Kernel Version Linux 3.18.123 #353 SMP PREEMPT Wed Oct 3
Reset none
Upgrade via ddup
Errors Several never seen before NB:

Code:
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594181] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594185] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594189] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.596629] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx
Oct 3 16:59:56 7500v2 kern.err kernel: [ 0.200686] pcie_init: pcie_init: unable to create IPC log context for pcie0-short
Oct 3 16:59:56 7500v2 kern.err kernel: [ 0.200701] pcie_init: pcie_init: unable to create IPC log context for pcie0-long
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.887074] Frequency table not initialized.
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.975670] UBI error: ubi_auto_attach: no valid UBI magic found inside mtd5
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.975724] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.990422] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
Oct 3 16:59:56 7500v2 kern.err kernel: [ 5.361594] UBIFS error (pid 476): ubifs_mount: cannot open "ubi0:rootfs_data", error -19
Oct 3 16:59:56 7500v2 kern.err kernel: [ 8.966746] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin


Working fine

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 r42410 std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM AP
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7238
Location: YWG, Canada

PostPosted: Wed Oct 03, 2018 22:04    Post subject: Reply with quote
bushant wrote:
r7500v2
Firmware Version DD-WRT v3.0-r37120M kongat (10/03/18 )
Kernel Version Linux 3.18.123 #353 SMP PREEMPT Wed Oct 3
Reset none
Upgrade via ddup
Errors Several never seen before NB:

Code:
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594181] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594185] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.594189] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8
Oct 3 16:59:56 7500v2 kern.err kernel: [ 15.596629] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx
Oct 3 16:59:56 7500v2 kern.err kernel: [ 0.200686] pcie_init: pcie_init: unable to create IPC log context for pcie0-short
Oct 3 16:59:56 7500v2 kern.err kernel: [ 0.200701] pcie_init: pcie_init: unable to create IPC log context for pcie0-long
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.887074] Frequency table not initialized.
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.975670] UBI error: ubi_auto_attach: no valid UBI magic found inside mtd5
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.975724] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Oct 3 16:59:56 7500v2 kern.err kernel: [ 2.990422] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
Oct 3 16:59:56 7500v2 kern.err kernel: [ 5.361594] UBIFS error (pid 476): ubifs_mount: cannot open "ubi0:rootfs_data", error -19
Oct 3 16:59:56 7500v2 kern.err kernel: [ 8.966746] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin


Working fine


more boot up junk thats been there for a long time

_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150 ------------> DD-WRT v3.0-r42490 std
[QUALCOMM] R7800 ------------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] DIR-862L --------------> DD-WRT v3.0-r42514 std
[QUALCOMM] WNDR4300 v1 --------> DD-WRT v3.0-r42514 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 ----------> DD-WRT v3.0-r42294 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum