Kernel Version: Linux 3.18.118 #19890 Tue Aug 14 03:49:55 CEST 2018 mips
Status:OK; Reset:No; Errors:None so Far !
Tests:
-> Wifi Speeds: OK
-> NTP: OK
-> Configurations ( VAp \ QOS \ DNsMasq ): Ok
###Problems:
-> SysLog Time not Correct;
Everything seems stable. I will keep an eye out for any problems.
Observation: Love the firmware, and all the comunity surrounding it. Very interested in helping in any way that I could. A big thanks for all of your work ! _________________ Today, is allways a Good day!
________________________________
Atheros: tp-link wr940N - Gateway \ DNSMasq \ AP
Joined: 25 Jun 2014 Posts: 140 Location: São Paulo - Brazil
Posted: Tue Aug 14, 2018 17:59 Post subject:
Lusitano wrote:
Router: TP-Link TL-WR841ND v11
Firmware: DD-WRT v3.0-r36596 std ( 08/14/18 )
Kernel: Linux 3.18.118 #19886 Tue Aug 14 03:46:01 CEST 2018 mips
OP. Mode: AP/Gateway
Previous: r36527
Update: GUI
Reset: NO
Status:OK
0 days 12:00:00
Errors/Issues:
MAC Address config box not changing ( Networking.asp )
Syslog shows wrong time on events ( after NTP updates successfully )
Wifi signal is good but shows poor % level ( Latest good % level in this TL v11 was r35034 )
Client Lease Time always shows '0 days 12:00:00' ( it should decrease.. i guess )
Aug 14 17:27:09 dd-wrt daemon.err httpd[919]: Request Error Code 404: File favicon.ico not found. Aug 14 17:32:34 dd-wrt daemon.info httpd[919]: httpd : Authentication fail Aug 14 17:32:34 dd-wrt daemon.err httpd[919]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Last edited by Lusitano on Wed Aug 15, 2018 21:32; edited 1 time in total
WNDR3700 V4
DD-WRT v3.0-r36596 std [08/14/18]
Linux 3.18.118 #19920 Tue Aug 14 04:47:57 CEST 2018 mips
GUI install over r36527
This is my backup main router ... exact same config as the EA8500
I swapped it in --- Uptime 1:18
Static leases
Local DNS
Recursive DNS Resolving
VLAN
ovpn server
USB Ext2 samba share
Wireless ok + guests on both radios
QOS HFSC FQ_Codel
NAT loopback on FTP is good. BS just has that screwed on the K4.x.x builds
NO local DNS connected to ovpn server while running unbound. Not sure what's up with that....Used to work fine.
Looks as if .../Status_Wireless.asp is all fixed now. No crashes if radio is disbaled.
Chromcast devices are on the 2.4 guest network and have no trouble controlling from either band on guest network.....but this unit
won't do as well as the EA8500 --- hard to cast video/movie directly from my phone (it stutters) altough casting pictures direct is ok.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Aug 14, 2018 23:18 Post subject:
mrjcd wrote:
hard to cast video/movie directly from my phone (it stutters) altough casting pictures direct is ok.
try increasing beacon int to 200-300 if 2.4ghz, 150-250 if 5ghz, adjust dtim accordingly as well so its not too high. make sure channels in use are as high quality as possible on channel survey. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
hard to cast video/movie directly from my phone (it stutters) altough casting pictures direct is ok.
try increasing beacon int to 200-300 if 2.4ghz, 150-250 if 5ghz, adjust dtim accordingly as well so its not too high. make sure channels in use are as high quality as possible on channel survey.
Beacon is 160 on 2.4 and 180 on 5GHz. DTIM is 2 on both.
It will actually cast video fine direct from the phone if no others are hogging wireless. The boy has xbox going and the wife is streaming a movie on the ROKU and those are both wireless on 2.4 guest network.
I can cast whatever to chromcast. Just a movie on my phone cast to the big screen with other wireless going on I think is a little much for the WNDR3700v4.
Might tinker with what you mentioned afterlater. It really aint no big deal ......
EA8500
DD-WRT v3.0-r36596 std [08/14/18]
Linux 4.9.119 #130 SMP PREEMPT Sun Aug 12 15:31:26 CEST 2018 armv7l
I put this router back in as main.
It worky ok. Same ol NO NAT loopback for FTP and NO local DNS thru ovpn server.
uptime 1:18
This router is just a bit more powerful than the other. Connecting to its ovpn server thru cell network only takes 1 second where the WNDR3700v4 takes about 3~5 seconds. Oh well they both using 4096 bit keys... guess that's difference in dual core 1400 rather than 560 CPU.
Posted: Wed Aug 15, 2018 21:02 Post subject: D-LINK DIR-866L(A1)
Router/Version: D-Link DIR866-A1 Firmware: DD-WRT v3.0-r36596 std (08/14/18) Kernel: Linux 3.18.118 #19916 Tue Aug 14 04:33:19 CEST 2018 mips Mode: Gateway. Web GUI upgrade, not reset. Status: Working
TP-Link WR1043ND V1.1
Status: Bricked
Used Webflash to update from a 2017er Version of dd-wrt. Debricked it and flashed stockfirmware. Tried to install dd-wrt from update via Webgui, used factory to dd-wrt. Bricked it again.
Tried different builds of factory to dd-wrt. Bricked it nearly ten times, but 05-23-2018-r36006 worked. Update to a newer build via Webupdate failed.
TP-Link WR1043ND V1.11
Status: Bricked
See text above. Tried the same steps.
*Things I shared here is for reference only, ie. it works for me does not mean it will work for you. And yes apparently such disclaimer is needed around here
