[WRT3200ACM]Cannot ping between wifi clients

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
elfarto
DD-WRT Novice


Joined: 06 Jun 2013
Posts: 11

PostPosted: Tue Jul 03, 2018 19:02    Post subject: [WRT3200ACM]Cannot ping between wifi clients Reply with quote
Running latest beta, i cannot ping between wifi clients, i can ping the router, and from the router i can ping all the clients, AP isolation is off, any idea what may be going on here ?
Sponsor
pa3fat
DD-WRT User


Joined: 25 Apr 2010
Posts: 125
Location: Valkenswaard, The Netherlands

PostPosted: Tue Jul 03, 2018 19:04    Post subject: Reply with quote
they have ip in the same range, not accidently connected to other wifi ap?
elfarto
DD-WRT Novice


Joined: 06 Jun 2013
Posts: 11

PostPosted: Tue Jul 03, 2018 19:23    Post subject: Reply with quote
pa3fat wrote:
they have ip in the same range, not accidently connected to other wifi ap?


All clients are configured to the same WIFI network
I just downgraded to v3.0-r34929 from 02-12-2018 and it works, so something got broken after that build.
pa3fat
DD-WRT User


Joined: 25 Apr 2010
Posts: 125
Location: Valkenswaard, The Netherlands

PostPosted: Tue Jul 03, 2018 19:27    Post subject: Reply with quote
let me test. running 36104 currently.
pa3fat
DD-WRT User


Joined: 25 Apr 2010
Posts: 125
Location: Valkenswaard, The Netherlands

PostPosted: Tue Jul 03, 2018 19:31    Post subject: Reply with quote
think you are right.

Let me test wired.....
pa3fat
DD-WRT User


Joined: 25 Apr 2010
Posts: 125
Location: Valkenswaard, The Netherlands

PostPosted: Tue Jul 03, 2018 19:35    Post subject: Reply with quote
Can ping (pc wired) to wireless and wired clients.

Cannot ping (pc wireless) to any of the clients.

V36104.

Not a real problem for me, but indeed strange.
Carlitos_11
DD-WRT Novice


Joined: 03 Jul 2018
Posts: 1
Location: Dorset, UK

PostPosted: Tue Jul 03, 2018 20:26    Post subject: Reply with quote
Hello, new guy here!

Signed up to say I'm having the same problem on my wrt3200acm since updating the firmware to this version.

Pinging gives "destination host unreachable". Other connections timeout after a while opposed to giving a not found error.

I haven't tried other wired clients (only my desktop pc is wired) but I cannot connect to any devices on my LAN. This includes smb shares, VNC, webservices on Raspberry Pi's, SSH or telnet to any device other than router itself is unsuccessful. So basically I've tried a variety of different devices & ports.

What's strange is it does work for a limited time after I've done a router reboot.

Additionally I have OpenVPN client is use with policy based routing. It appears to make no difference if I have VPN client enabled or disabled.
elfarto
DD-WRT Novice


Joined: 06 Jun 2013
Posts: 11

PostPosted: Tue Jul 03, 2018 20:26    Post subject: Reply with quote
I have a (WIFI) network connected printer, which doesn't work as wifi clients can't find each other in the network, it's like if AP Isolation was turned on. (I already checked from the UI and it shows as Disabled)
jbrain
DD-WRT Novice


Joined: 24 Jun 2008
Posts: 9

PostPosted: Sat Jul 21, 2018 3:24    Post subject: Reply with quote
Another new guy (well, had an account, but been away from the forum for a while) with the same issue.

Things were working fine with the WRT54GL repeater bridge units here, but the new WRT3200ACM will "see" the repeaters and the printers behind them only for about 10-20 pings, and then they disappear. TCP traffic also cannot connect.

As the OP did, I backed down to the old Feb release and all seems OK.
dwnl
DD-WRT Novice


Joined: 18 Sep 2011
Posts: 16

PostPosted: Sat Jul 21, 2018 9:53    Post subject: Reply with quote
Still works fine on DD-WRT v3.0-r35898 std (05/07/18 on WRT3200ACM.
All releases following this one have issues - can't ping anything, wireless disconnects for Android phones and so on.
So check out the r35898.
Mhanzen
DD-WRT Novice


Joined: 02 Sep 2018
Posts: 4

PostPosted: Sun Sep 02, 2018 8:24    Post subject: Reply with quote
Currently, I run the build r36808. Wireless is stable but I can't ping the android devices on my network from the router of from Linux/Windows wired devices. Other wireless devices (Wireless radio) can be pinged. Unfortunately, that prevents application running on my Windows PC to interact with my android phone.

I tested the build r35898 using the same wireless settings and indeed I can ping the Android devices. Unfortunately the wifi network was unstable. My wireless radio was even unable to connect.
Here are my settings:
5.0 Ghz Mode AP, Network mode AC/N-Mixed, Ch. Width VHT80
2.4 Ghz Mode AP, Network mode Mixed, Ch. Width Full(20Mhz)
Wireless channel are NOT set to auto.
shmackitup
DD-WRT Novice


Joined: 06 Feb 2011
Posts: 28

PostPosted: Wed Sep 05, 2018 5:26    Post subject: Reply with quote
This has been a problem for quite a while now. I reported it many builds ago and still don't see a fix.
Adamcarter
DD-WRT User


Joined: 09 Aug 2016
Posts: 235

PostPosted: Wed Sep 05, 2018 21:47    Post subject: Reply with quote
Yup been an issue for a few months now.

Best to send an message to brainslayer that you want svn issue #6319 fixed. That we dont want a work around. We want a fix.

If he cant do it, have him ask kong. As kong has made the fixes.

_________________
WRT3200ACM V1 r39267 std (03/22/19) OpenVPN client
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum