Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Thu Jun 21, 2018 18:16 Post subject: Re: Linksys E4200 v1
jwh7 wrote:
kernel-panic69 wrote:
There's also a link to a modified .bin file for initial build on that page, which I have downloaded, but I'm tossed between tomato/advanced tomato/fresh tomato, DD or stock for that hardware. OpenWRT doesn't support wifi functionality that I know of, but afaik, the others do (?)
Ya OpenWRT def won't support the (USB-based) 5 GHz. Not sure about the 2.4. When I tried to used the 5 GHz on stock and Shibby, the router would randomly reboot every 5-15 minutes. mrjcd had mentioned this was common on the E2500 when under load. Maybe the v2 or v3 is improved in that regard? I'm sure the updated OEM f/w for the v3 is for the krack fix. There were lots of dec-feb updates from most manuf's for it. I'm surprised Linksys did, given their history with firmware. Maybe the new mgmt is helping.
Yeah, I heard Cisco sold Linksys to Belkin, but it looks like Foxconn bought them both....
1) This flash took about a minute and a half to complete with my Buffalo light blinking three times then stop then three times again for the duration of the flash and after the flash it was the steady white light to indicate all is fine
I have noticed this as well when I have flashed mine with other versions... thought it was just me
Router Model: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r36168 std (06/20/18)
Kernel: Linux 4.4.138 #3313 SMP Wed Jun 20 12:58:42 CEST 2018 armv7l
Previous: DD-WRT v3.0-r36079 std (06/01/18)
Mode: AP / Local DNS / QoS HFSC - FQ-CODEL/ Static DHCP x 12
Reset: GUI before and after Flash
Router Model: Linksys EA6400
Firmware: DD-WRT v3.0-r36168 std (06/20/18)
Kernel: Linux 4.4.138 #3313 SMP Wed Jun 20 12:58:42 CEST 2018 armv7l
Mode: VPN AP / Switch / QoS HFSC - FQ-CODEL
Previous: DD-WRT v3.0-r36154 std (06/16/18)
Reset: No.
Status: All Working as expected. QoS seems to prefer the EA6400 over WZR-1750 despite very similar hardware and setup. No significant problems with WZR-1750 though.
Router/Version: Linksys EA6350 v2
Firmware: DD-WRT v3.0-r36168 std (06/20/18)
Kernel: Linux 4.4.138 #3313 SMP Wed Jun 20 12:58:42 CEST 2018 armv7l
Mode: DHCP, DHCP Server, AP
Status: after updating via serial port (tftpd) without resetting configuration, 2.4GHz doesn't work (not able to see network), speedtest download is slow 40Mbps, upload 120Mbps.
After resetting to factory setting and reconfigure, then 2.4GHz is ok, speedtest dl 150Mbps (my laptop doens't support AC), ul 120Mbps
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat Jun 23, 2018 13:18 Post subject: Asus RT-N18U and DD-WRT BS Build 36168
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r36154 std (06/10/18)
Kernel: Linux 4.4.138 #3317 Wed Jun 20 13:22:27 CEST 2018 armv7l
Previous: DD-WRT v3.0-r36168 std (06/20/18)
Mode: Access Point (AP, not using IPv6, VPN, NAS nor USB)
Status: Working, no major problems
Reset: NO reset during firmware upgrade
1. No LAN LEDs... all off though there were physical cables.
2. Error(s) logged:
Code:
grep -i err /var/log/messages
Jun 23 13:15:36 DD-WRT daemon.err httpd[942]: Request Error Code 404: File style/elegant/logo.png not found.
Jun 23 13:15:37 DD-WRT daemon.err httpd[942]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jun 23 13:15:41 DD-WRT daemon.err httpd[942]: Request Error Code 404: File style/elegant/logo.png not found.
Jun 23 13:15:43 DD-WRT daemon.err httpd[942]: Request Error Code 404: File style/elegant/logo.png not found.
3. Warning(s) logged:
Code:
grep -i warn /var/log/messages | grep -v DROP
Jun 23 13:13:56 DD-WRT kern.warn kernel: COEX: downgraded chanspec 0x1904 to 0x1006: channel 1 used by exiting BSSs
Other users' comments:
- WiFi broken in k3.x editions since build 35531 for modes other than AP?
- 5GHz problem can be solved by adding delay in init process?
- Setting WPA re-key interval if not 99999 and rebooting router daily fixed NAS crash problems?
- Setting WPA re-key interval to 0 could prevent wifi clients from disconnecting?
- NAS functions collided with NTP server, causing time skew?
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS (also something related to blank Source Net?)
e. The "Source Net" field in Port-Forwarding screen displayd blank field as "¸ÖÁv",
from builds 32667 to 32767. Possibly null-pointer assignment?
f. Blank Source Net in Port Forwarding cripped WAN in builds 35831-35874! Needed to be "0.0.0.0/0" or no internet!
g. Running "cat /proc/mtd" in Administration -> Commands for builds before 35916 didn't escape HTML special characters.
speedtest.net result for DD-WRT BS build 36168 and Asus RT-N18U.png
Description:
speedtest.net result for DD-WRT BS build 36168 and Asus RT-N18U (2nd test)
Filesize:
10.79 KB
Viewed:
3530 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r36168 std (06/20/18 )
Kernel: Linux 4.4.138 #3317 Wed Jun 20 13:22:27 CEST 2018 armv7l
Previous: r36154
Reset: No
Mode/Status: Gateway/working
Issues/Errors: Yes
Jun 20 21:04:35 daemon.info httpd[1030]: Authentication fail
Jun 20 21:04:35 daemon.err httpd[1030]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jun 20 21:04:40 daemon.err httpd[1030]: Request Error Code 404: File favicon.ico not found.
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Sat Jun 23, 2018 16:11 Post subject: Re: Asus RT-N18U and DD-WRT BS Build 36168
mwchang wrote:
Other users' comments:
- WiFi broken in k3.x editions since build 35531 for modes other than AP?
- 5GHz problem can be solved by adding delay in init process?
- Setting WPA re-key interval if not 99999 and rebooting router daily fixed NAS crash problems?
- Setting WPA re-key interval to 0 could prevent wifi clients from disconnecting?
- NAS functions collided with NTP server, causing time skew?
I had working 5GHz with nothing other than the boot wait default config in the WebGUI, never had to reboot when I set the re-key to 99999, both it and setting it to 0 seemed to keep the interruption to zero, and it's 'nas' (network authentication service), not NAS (Network Attached Storage)... but, I still think the 3600 re-key and 3600 ntp sync were colliding. OR, there were other things that needed to be setup on router and clients for it to work right(?). OH, and the timestamp skew has been fixed, I believe. All syslog timestamps are UTC as best I can tell.
mwchang wrote:
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS (also something related to blank Source Net?)
e. The "Source Net" field in Port-Forwarding screen displayd blank field as "¸ÖÁv",
from builds 32667 to 32767. Possibly null-pointer assignment?
f. Blank Source Net in Port Forwarding cripped WAN in builds 35831-35874! Needed to be "0.0.0.0/0" or no internet!
g. Running "cat /proc/mtd" in Administration -> Commands for builds before 35916 didn't escape HTML special characters.
'cat /proc/mtd' in the WebGUI was fixed a few builds back....
R7000
DD-WRT v3.0-r36168 mega [06/20/18]
found 2.4G wireless MAC address is equal to 2.4G VAP MAC address,so 2.4G SSID only one good,it's random.
downgrade to r36104,same as r36168.
downgrade to r35927 to reset repeat,but found wl0.1 2.4G vap MAC address same as wl1 5G MAC address
Posted: Sun Jun 24, 2018 16:59 Post subject: RT-AC56 loops
Router/Version: Asus RT-AC56U
Firmware: DD-WRT v3.0-r36168 std
Previous: DD-WRT v3.0-r36154 std
Kernel: Linux 4.4.136
Status: R36168 does not boot on RT-AC56.
(TFPTing older version in recovery mode was required to get the router to boot again)
Router/Version: Linksys E3200
Firmware: DD-WRT v3.0-r36168 mega (06/20/2018)
Kernel: Linux 3.10.108-d2 #19640 Wed Jun 20 18:06:53 CEST 2018 mips
Mode: Gateway/AP
Status: Reset to defaults after installing and everything has been up and running without issues for a few days. I have a very basic setup without any VPN or QoS. Only thing I noticed was that I had underclcked the router and the clock speed settings survived a reset. Not sure if that is normal or not but it's not a bad thing.
Router/Version: Linksys E2500 v1
Firmware: DD-WRT v3.0-r36168 mega (06/20/2018)
Mode: gateway/AP
Status: Reset to defaults after installing and used it for maybe 1-2 hours. Everything seems to be running fine. I noticed my temps were quite a bit lower then my E1500 so that's kind of nice. Might look into setting this up as a wireless repeater sometime.